Gasket Groove Width/Height Measurement Limit Gauge

Gasket Groove Width/Height Measurement Limit Gauge

A limit gauge that can be used with various ring numbers to determine ring joint gasket width/height pass/fail.
[Features]
· GO/NO GO standards are in accordance with JPI-7S-23.
· Gasket width tolerance: ±0.20 mm.
· Gasket height tolerance: ±0.5 mm.
· Octagonal angle radius tolerance: ±0.5 mm.
· Material is stainless steel (SUS420J2).
[Applications]
· Determines ring joint gasket mounted flange groove width pass/fail.

Part Number

Configured Part Number is shown.

Part Number
GST-1
GST-2
GST-3
GST-4
GST-5
GST-6
GST-7
Part NumberVolume DiscountDays to ShipGasket Width
(mm)
Gasket Height
(mm)
Octagonal Angle Radius
(mm)
Mass
(g)
Material Use Specifications Compatible Ring Number Gasket Width Tolerance
(mm)
Gasket Height Tolerance
(mm)
Octagonal Angle Radius Tolerance
(mm)
Quote 11.1315.71.553Stainless Steel (SUS420J2)A limiting gauge used in attachment with a ring joint gasket for judging pass/fail of the flange groove width.GO/NOT standards are in accordance with JPI-7S-23.21、23、24、26、27、30、31、34、35、37、39、41、44、45、49、53、57、61、65、69、82、84、92、99±0.20±0.5±0.5
Quote 12.7017.51.553Stainless Steel (SUS420J2)A limiting gauge used in attachment with a ring joint gasket for judging pass/fail of the flange groove width.GO/NOT standards are in accordance with JPI-7S-23.28、32、46、73±0.20±0.5±0.5
Quote 15.8820.61.5110Stainless Steel (SUS420J2)A limiting gauge used in attachment with a ring joint gasket for judging pass/fail of the flange groove width.GO/NOT standards are in accordance with JPI-7S-23.38、50、54、62、66、77、86、87±0.20±0.5±0.5
Quote 19.0523.91.5110Stainless Steel (SUS420J2)A limiting gauge used in attachment with a ring joint gasket for judging pass/fail of the flange groove width.GO/NOT standards are in accordance with JPI-7S-23.42、47、70、74、88、89、93、94、95±0.20±0.5±0.5
Quote 22.2226.91.5110Stainless Steel (SUS420J2)A limiting gauge used in attachment with a ring joint gasket for judging pass/fail of the flange groove width.GO/NOT standards are in accordance with JPI-7S-23.51、58、96、97、98±0.20±0.5±0.5
Quote 25.4031.82.3139Stainless Steel (SUS420J2)A limiting gauge used in attachment with a ring joint gasket for judging pass/fail of the flange groove width.GO/NOT standards are in accordance with JPI-7S-23.63、78±0.20±0.5±0.5
Quote 28.5835.12.3139Stainless Steel (SUS420J2)A limiting gauge used in attachment with a ring joint gasket for judging pass/fail of the flange groove width.GO/NOT standards are in accordance with JPI-7S-23.55、67、71、100±0.20±0.5±0.5

Loading...

  1. 1

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
TEL:124- 468-8841 / FAX:124-468-8811
9:00am - 5:30pm (Monday -Saturday)