Vacuum Fastener

Vacuum Fastener

[Features]
· Air from the compressor instantly adsorbs and fixates workpieces.
· Can be used in machine tools of machining centers and polishing machines etc.
· Since a vacuum ejector is used, a dedicated vacuum pump is not required (integrated model).
· Usable by simply inserting a one-touch pipe joint tube from a compressor in the factory.
· Ideal for non-magnetic materials such as stainless steel, aluminum, resin, etc. as it suctions using air.
· Because small amounts of air will be emitted from the φ1 vacuum hole when the valve is off, its structure helps prevent foreign matter from intruding into air passages.
· Almost all parts are assembled on the front panel, which facilitates maintenance, including replacement of parts.
· Has a built-in pressure reducing valve for greater economy by adjusting the adsorption force or reducing air consumption.
· Mounting holes for hexagon socket head cap screws allow parallel specifications.

PDF

Japanese Only

Part Number

Configured Part Number is shown.

Part Number
SVA2025
SVA2540
SVA3035
SVA3560
Part NumberVolume DiscountDays to ShipMaximum Absorption Power
(kN)
Number of Grids
(pcs)
Maximum Air Pressure Consumption
(l/min)
Maximum Load Mass
(kg)
Size
(mm)
Mass
(kg)
Specifications Accessory Features
9 Day(s) or more 1.311723024200×250×659Materials: FC300; Input pressure from compressor: 0.5 to 0.7 MPa; Maximum vacuum pressure: -88 kPaNeolon (black): About two windings, Silicone rubber (white): About one winding, One-touch pipe fitting tube (φ6 mm, inner diameter 4 mm): 1 m, One-touch pipe fitting coupler: 1No dedicated vacuum pump is necessary because a vacuum ejector is used (integrated type). Almost all parts are put together in the front panel, which facilitates maintenance including replacement of parts. Holes for hexagon socket head cap screws allow parallel installation.
9 Day(s) or more 2.843526050250×400×6519Materials: FC300; Input pressure from compressor: 0.5 to 0.7 MPa; Maximum vacuum pressure: -88 kPaNeolon (black): About two windings, Silicone rubber (white): About one winding, One-touch pipe fitting tube (φ6 mm, inner diameter 4 mm): 1 m, One-touch pipe fitting coupler: 1No dedicated vacuum pump is necessary because a vacuum ejector is used (integrated type). Almost all parts are put together in the front panel, which facilitates maintenance including replacement of parts. Holes for hexagon socket head cap screws allow parallel installation.
9 Day(s) or more 2.993706050300×350×6520Materials: FC300; Input pressure from compressor: 0.5 to 0.7 MPa; Maximum vacuum pressure: -88 kPaNeolon (black): About two windings, Silicone rubber (white): About one winding, One-touch pipe fitting tube (φ6 mm, inner diameter 4 mm): 1 m, One-touch pipe fitting coupler: 1No dedicated vacuum pump is necessary because a vacuum ejector is used (integrated type). Almost all parts are put together in the front panel, which facilitates maintenance including replacement of parts. Holes for hexagon socket head cap screws allow parallel installation.
9 Day(s) or more 6.16748100100350×600×6540Materials: FC300; Input pressure from compressor: 0.5 to 0.7 MPa; Maximum vacuum pressure: -88 kPaNeolon (black): About two windings, Silicone rubber (white): About one winding, One-touch pipe fitting tube (φ6 mm, inner diameter 4 mm): 1 m, One-touch pipe fitting coupler: 1No dedicated vacuum pump is necessary because a vacuum ejector is used (integrated type). Almost all parts are put together in the front panel, which facilitates maintenance including replacement of parts. Holes for hexagon socket head cap screws allow parallel installation.

Loading...

  1. 1
 

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
TEL:124- 468-8841 / FAX:124-468-8811
9:00am - 5:30pm (Monday -Saturday)