4-Flute Tapered End Mill Short Blade 4TE (SKH56)

4-Flute Tapered End Mill Short Blade 4TE (SKH56)

[Cutting Edge Shape Type]
· Tapered square
[Tool Grade]
· High-speed steel
[Coating]
· Non-Coated
[Torsion Angle (θ)]
· Weak Torsion (15°-25°)
[Flute No.] 4-Flute

Part Number

Configured Part Number is shown.

Part Number
4TE15-3
4TE15-4
4TE15-5
4TE15-6
4TE20-3
4TE20-4
4TE20-5
4TE20-6
4TE30-3
4TE30-4
4TE30-5
4TE30-6
Part NumberVolume DiscountDays to ShipTip Diameter (D)
(φ)
Single Angle (θ)
(Degree)
Flute Length (l)
(mm)
Link Diameter (d)
(mm)
Overall Length (L)
(mm)
Large Tip Diameter
(mm)
Allowable Tolerance of Tip Diameter (φD) Allowable Tolerance of Angle (α°)
(°)
6 Day(s) or more 31525168516.390~-0.05+10~-10
6 Day(s) or more 41530169020.070~-0.05+10~-10
6 Day(s) or more 515352011023.760~-0.05+10~-10
6 Day(s) or more 615402512027.430~-0.05+10~-10
6 Day(s) or more 32025168521.190~-0.05+10~-10
6 Day(s) or more 42030209025.830~-0.05+10~-10
6 Day(s) or more 520352511030.470~-0.05+10~-10
6 Day(s) or more 620402512035.110~-0.05+10~-10
6 Day(s) or more 330202510026.090~-0.05+10~-10
6 Day(s) or more 430202510027.090~-0.05+10~-10
6 Day(s) or more 530202510028.090~-0.05+10~-10
6 Day(s) or more 630253211034.870~-0.05+10~-10

Loading...

  1. 1

Basic Information

Type Tapered Square Number of Flutes(sheet) 4 Torsion Angle Weak Helix (15 to 25°)
Tool Material Type High-Speed Steel Coating Non-Coated

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
TEL:124- 468-8841 / FAX:124-468-8811
9:00am - 5:30pm (Monday -Saturday)