Small Vacuum Desiccator
Caution
Product Description
This vacuum desiccator is small and lightweight, convenient for carrying around.
[Features]
· For replacement of decompressed gas.
· Square model that can be stacked.
· Material: Main body: Transparent PMMA (acrylic resin), packing: NBR (round), silicone rubber (square).
· Allowable degree of vacuum: approximately 133 Pa.
· Valve: Hose nipple / φ8 mm OD.
· Tube connector: O.D. φ6 mm tube fitting, one-touch.
Affordable And Portable Vacuum Desiccator
2-4920-07 (square): inner dimensions W60 × D25 × H90 mm
2-4920-08 (square): inner dimensions W95 × D40 × H140 mm
2-4920-11 (round): inner dimensions ø60 (diameter 60 mm) × 30 mm
2-4920-12 (round): inner dimensions ø60 (diameter 60 mm) × 60 mm
2-4920-13 (round): inner dimensions ø60 (diameter 60 mm) × 100 mm
2-4920-15 (round): inner dimensions ø60 (diameter 60 mm) × 300 mm
Precautions And Warnings For Use
- Use this product only for its intended purpose. Injuries may result from bending or breaking it.
- Sudden decompression or delivering a strong shock from the outside during decompression could cause damage and is dangerous.
- Do not handle roughly. Injuries may occur if the product falls over or is damaged.
- Do not place near open flames or heated substances.
- This product will be infiltrated by acids and organic solvents, so do not bring it in contact with these chemicals.
- Do not use excessive force when tightening. This may cause damage to the threads and result in an air leak.
- Ensure that sealing tape is tightly applied. This could be the source of an air leak.