Dust Removal Hood
Caution
Product Description
Hood capable of easily removing dust.
[Features]
・ Dust removal work is possible just by connecting it to the duct of the vacuum cleaner
・ By surrounding it with a hood, it does not scatter dust around
[Applications]
・ Ideal for work that generates dust
Hood Capable Of Easily Removing Dust
Allows for easy dust removal just by attaching to the vacuum cleaner duct. Prevents scattering of dust to the surroundings via enclosing in the hood.
- Size (excluding protruding parts) 700 × 500 × 500 mm
- Materials (cover)·- soft PVC (polyvinyl chloride resin) sheet
- Materials (frame) - stainless-steel (SUS304) pipe
- Materials (top plate) - PVC (polyvinyl chloride resin)
- Duct diameter ø38 (diameter 38 mm)
Assembly Method
1. Assemble the left/right frames. Prepare 8 × 474‑mm stainless-steel pipes, 2 × 2-way joints and 6 × 3-way joints. Pound in each pipe into the joint with a hammer, etc., referring to the diagram on the left.
At this point, make sure that the 3-way joints are facing each other such that they will go to the same positions.
2. Once the left/right frames are assembled, connect the left/right frames with 3 × 674‑mm stainless-steel pipes. With this, the main body is complete.
3. Place the top plate at around the center of the completed main body frame.
4. Cover with the vinyl curtain.
5. There is no hole in the top surface of the curtain, so cut one open with a box cutter, etc. as needed.
○: For the corner joint, pound the pipe all the way in so there is no gap. If it is not sufficiently pounded down, the main body frame may be shaky and other issues may occur.
×: If there are several millimeters of insertion gap left over, it may be difficult, but use a hammer, etc. to pound the corner joint down firmly all the way in.