MiSUMi
Loading...

Liquid Silicone (Adhesive)

Brand :
AS ONE

Caution

    Product Description

    Liquid silicone.
    [Applications]
    · Single-ingredient oxime silicone adhesive sealing material, reacts with moisture in the air and hardens into an elastic, rubbery state.
    · Adheres to metal, plastic, glass and almost any other material without primer while it cures.
    · This product does not emit acid while curing, so it causes almost no corrosion to non-copper metals.
    · After curing, the rubber has excellent heat resistance, cold resistance, weather resistance, water resistance and electrical properties, etc.
    [Applications]
    · Ideal as an adhesive sealant for electronic communication equipment.
    · Ideal as a sealing material for car parts or gaskets for meters/instruments.

    Liquid Silicone Specifications

    Characteristics

    CodeModel NumberCharacteristicsFunctionality
    TypePre-Curing CharacteristicsPost-Curing CharacteristicsApplications
    Flow CharacteristicsViscosity Coefficient
    (25°C) P
    {Pa⋅s}    		Tack-free
    Time
    min    		Relative Density
    (25°C)    		Hardness
    (JIS A)    		Tensile Strength
    kgf/cm2
    {MPa}    		Stretch
    %    		Adhesive Strength
    kgf/cm2
    {MPa}    		Thermal Conductivity
    cal/cm⋅s⋅°C
    {W/m⋅K}    		Volume Resistivity
    Ω⋅cm    		Breakdown
    Voltage
    kv/mm    		Dielectric Constant
    (60 Hz)    		Dielectric Tangent
    (60 Hz)    		AdhesiveSealFixedCoatingPottingImpregnation
    02TSE392For general useAlcoholNon-liquidity-51.043016 {1.6}43015 {1.5}4.4 × 10-4 {0.18}2 × 1015222.90.005✓✓✓---
    10TSE397Fluidity500 {50}101.042012 {1.2}30012｛1.2｝4.4×10-4｛0.18｝2×1015222.90.005✓✓✓✓--
    11TSE399Fluidity25 {2.5}101.043013 {1.3}1408 {0.8}4.4 × 10-4 {0.18}2×1015202.90.005---✓✓✓
    01TSE382OximeNon-liquidity-101.042819 {1.9}38017 {1.7}4.4 × 10-4 {0.18}1 × 1015232.90.004○✓✓---
    08TSE387Fluidity600 {60}901.042518 {1.8}30013 {1.3}4.4 × 10-4 {0.18}1 × 1015202.90.004✓✓✓✓--
    09TSE389Fluidity56 {5.6}301.043019 {1.9}1604 {0.4}4.4 × 10-4 {0.18}1 × 1015202.70.009---✓✓✓
    12TSE3826For heat resistanceNon-liquidity-101.042920 {2.0}40014 {1.4}4.4 × 10-4 {0.18}1 × 1015232.90.004✓✓✓---
    13TSE322Adhesive for sealingAdditional typeFluidity1,100 {110}60 (150°C)1.274535 {3.4}23025 {2.5}6.9 × 10-4 {0.29}2×1015212.80.001✓✓✓---

    Chemical Resistance

    Chemical NameVolume ChangeChemical NameVolume Change
    Acid
    		Concentrated hydrochloric acid◎OilASTM No.1 oil (150°C, 70h)◎
    Hydrochloric acid (3%)◎ASTM No.3 oil (150°C, 70h)△
    Concentrated sulfuric acidDisintegrationMineral oil◎
    Sulfuric acid (10%)◎Castor oil◎
    Concentrated nitric acid△Linseed oil◎
    Nitric acid (7%)◎Silicone oil (35°C, 70h)△
    Dilute acetic acid◎S
    o
    l
    v
    e
    n
    t    		Acetone△
    Acetic acid◎Butyl alcohol✓
    Hydrofluoric acidDisintegrationEthyl alcohol◎
    Citric acid◎Carbon tetrachloride×
    Phosphoric acid◎Gasoline×
    AlkaliConcentrated ammonia solution◎Mineral spirit×
    Ammonia solution (10%)◎Toluene×
    Potassium hydroxide (20%)◎WaterWater (room temperature)◎
    Sodium hydroxide (1%)◎Boiling water (70h)◎
    Sodium hydroxide (20%)◎OtherDetergent◎
    Sodium hydroxide (50%)◎R-12 CFC✓
    Inorganic Salt Aqueous SolutionSodium chloride (10%)◎CFC-114△
    Sodium carbonate (2%)◎Methyl chloride△
    Sodium carbonate (20%)◎-
    Hydrogen peroxide solution (3%)◎

    *Examination method: volume change of cured liquid silicone rubber measured after soaking for 1 week at 25°
    ◎: 10% or less, ○: 10 to 25%, △: 25 to 75%, ×: 75% or greater

    TSE382 Specifications

    TSE382C external appearance

    TSE382C external appearance

    Features

    • Excellent adhesive properties. Adheres to metal, plastic, glass and almost any other material without primer.
    • Almost zero corrosion. This product does not emit acid while curing, so it causes almost no corrosion to non-copper metals.
    • No irritating odor. Does not emit unpleasant acetic acid-like smells while curing, making it suitable for use indoors.
    • Has excellent heat and cold resistance. Maintains rubber elasticity and adhesion within a temperature range of 55 to 200°C.
    • Excellent weather resistance. Excellent UV resistance, ozone resistance, water resistance, etc., so it can be used outdoors for extended periods with almost no deterioration.
    • Excellent electrical properties. Maintains these excellent electrical properties even in harsh conditions.
    • Easy to handle. Simply by pushing it out of the tube or cartridge, it will cure at room temperature and becomes rubber.
    • TSE382-C has UL746B temperature index Elec.150°C, Mech.140°C and UL94HB certification (File No. E56745).

    Applications

    • Insulating waterproof sealing for electric/communication equipment
    • Adhesive sealing for waterproofing, dustproofing and airtight sealing of instruments.
    • Wind sealing for cars and marine vessels
    • Adheres to metals, glass, plastic, wood, etc.
    • Additionally, adhesive sealing for devices used outdoors or parts that require heat or cold resistance.

    Precautions For Use

    • Clean and dry the surface of adherend thoroughly.
    • When handling, be sure to wear protective goggles and gloves depending on requirements.
    • Do not let skin come into contact with uncured adhesive for long periods of time.
    • Although this product has almost no effect on metal, be aware that using it on copper in an area where gas cannot escape can lead to discoloration or corrosion.
    • Run ventilation equipment and keep the area well ventilated when using the product.
    • Keep out of direct sunlight and store in a cool, dry and dark place.
    • Store out of reach of children.