End Mill Shank Drill with Blades 3xD with Oil Hole RT80U 1171 (1171-010.500)

End Mill Shank Drill with Blades 3xD with Oil Hole RT80U 1171 1171-010.500

Uses an RT blade for consistent drilling performance. Internal lubrication gives good chip discharge properties.

PDF

Japanese Only

Part Number

Configured Part Number is shown.

1171-010.500

Part Number
1171-010.500
Part NumberVolume DiscountDays to ShipHole diameter (drill diameter) d1
(mm)
Groove Length l2
(mm)
Overall Length L1
(mm)
shank diameter d2
(mm)
Shank length l3
(mm)
Standard Internal oil supply Blade diameter tolerance Shank diameter tolerance
8 Day(s) or more 10.5511031648DIN6538KAvailableh7h6

Loading...

  1. 1
 

Basic Information

work material general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum Tool Material Type Carbide Shank Type End Mill Shank
Coating Y/N Available Coating Type TiN With/without Oil Hole Available
Number of flutes(sheet) 2 tip angle(°) 140

Please check the type/dimensions/specifications of the part 1171-010.500 in the End Mill Shank Drill with Blades 3xD with Oil Hole RT80U 1171 series.

Product variants

Part Number
1171-010.200
1171-010.300
1171-010.400
1171-010.600
1171-010.800
1171-010.900
Part NumberVolume DiscountDays to ShipHole diameter (drill diameter) d1
(mm)
Groove Length l2
(mm)
Overall Length L1
(mm)
shank diameter d2
(mm)
Shank length l3
(mm)
Standard Internal oil supply Blade diameter tolerance Shank diameter tolerance
8 Day(s) or more 10.2511031648DIN6538KAvailableh7h6
8 Day(s) or more 10.3511031648DIN6538KAvailableh7h6
8 Day(s) or more 10.4511031648DIN6538KAvailableh7h6
8 Day(s) or more 10.6511031648DIN6538KAvailableh7h6
8 Day(s) or more 10.8511031648DIN6538KAvailableh7h6
8 Day(s) or more 10.9511031648DIN6538KAvailableh7h6

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
TEL:124- 468-8841 / FAX:124-468-8811
9:00am - 5:30pm (Monday -Saturday)