Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(1 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

DPM-2

type Days to Ship

Specification/Dimensions

type
- DPM
Clear

Days to Ship

All

6 Day(s) or Less
Clear

Specify Alterations

Digital Bend Meter

Brand :

Order Qty :
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

Product Description

Enables direct reading of the bent angle of sheet metal in real time without calculation. Successful in world's first miniaturization.

[Features]
· 2 types of measurements are possible with button switching.
· Enables direct reading of the bent angle of sheet metal without calculation.
· Can also be used as an ordinary goniometer.
· Zero can be set at an arbitrary angle, and measurement performed from that position.
· Display stabilization time has been shortened to 3 seconds to increase work efficiency.
· The numbers automatically reorient to display facing upward if the main unit is turned upside down.
· The mode and numerical values are stored when power is cut off.
· With strong magnets (2 kg adsorption force x 3).
· With fall-prevention strap.

Product TOP

: 30; 45; 60

Part Number
DPM-2

Part Number	Price	Minimum Order Qty.	Volume Discount	Days to Ship
	₹ 33,140.85	1 Piece(s)		6 Day(s) or more

Basic Information

Product Type	Digital Goniometer	Measuring Range	0 to 360°	Minimum Display(°)	0.1
Pole Type	No Beam	Size(mm)	57L×57H×29W	Measurement Range Details	Bending angle mode: 180° X 2α (360°) / General angle mode: 90° X 4 (360°)
Material	Aluminum, Alloy Plated Finish	Mass(g)	220	Dust-proof and waterproof specifications	IP50
Measurement precision (repeatability)	Bending angle mode: 0° to 5° / 175° to 180°= ±0.2° (±12' or 3.5 mm/m), 6° to 174° = ±0.4° (±24' or 7 mm/m), General angle mode: 0° to 5° & 85° to 90° = ±0.1° (±6' or 1.75 mm/m), 6° to 84° = ±0.2° (±12' or 3.5 mm/m)	Operating Temperature	0℃～40℃	Required batteries	9 V 6P square alkaline battery X 1
Battery life	70 h (continuous use)	Measuring surface magnet	Neodymium Magnet φ10, Adsorption Power 2 kg x 3	Automatic switch off	After Approx. 5 Minutes
Traceability	Calibration certificate can be issued (for fee)