(!)NOTE : Windows 7 users won’t be able to use some latest features of eCatalog/WOS since Microsoft is ending support for Windows 7 on 14 Jan, 2020. Please upgrade your system for uninterrupted services.
- Due to an increase in demand, the lead time of some of the electrical items from our eCatalogue has increased abnormally and may cause delays in delivery or order suspension. We apologize for the inconvenience and appreciate your kind understanding. Once the supply will get normalized, we will update the same.
Product DetailSpecification/Dimensions
-
Number of load-free rotations(rpm)
-
Overall Length(mm)
-
Air Consumption Amount(m³/min)
-
Trusco Code
- 211-6014
- 211-6006
- 211-5999
- 211-5981
-
type
- UG
- UG-38NA
- UG-38NL
- UG-38NSA
- UG-50S-200
-
Ventilation Direction
- Front
- Rear
- Side
Days to Ship
-
- All
- 5 Day(s) or Less
- 8 Day(s) or Less
- 19 Day(s) or Less
Specify Alterations
Straight Grinder (For Mounted Point Rotary Bar With Shaft)
Click this image to zoom it.
Move the mouse over or click the image to zoom
Copy Part Number URL to Clipboard
The part number URL has been copied into your clipboard.
-
- Starting From :
- 19,272₹/Unit
-
- Order Qty :
-
-
- Total Price :
- ---
-
- Days to ship :
- ---
Select part number to Order Now/ Add to Cart
Similar Products
Product DetailProduct Description
[Features]
·For a mounted point rotary bar.
[Applications]
·For mold finishing, deburring, chamfering, pipe inner finishing, etc.
Product features and specifications
Basic specifications and features of the product
- UG-25NA/UG-38N/UG-38NA/UG-38NL/UG-50S-200: Lever type. Grinding wheel is not included.
- UG-25NSA/UG-38NS/UG-38NSA/UG-38NSL: Roll type. Grinding wheel is not included.
Collet chuck
UG-25N series
UG-38N series, chuck CP (Chuck + chuck nut)
Standard table
* Air pressure 0.6 MPa (Gauge) data when no load is applied.
* When installing the carbide rotary bar, be sure to use an overhang of 13 mm or less.
* Do not use mounted points whose diameter is ø50 and larger.
* Rear exhaust type
* Air pressure 0.6 MPa (Gauge) data when no load is applied.
* When installing the carbide rotary bar, be sure to use an overhang of 13 mm or less.
* Do not use mounted points whose diameter is ø50 and larger.
Cautions/prohibitions
To use the air grinder safely
The following are the minimum required precautions. For details, please use in accordance with the provisions of the Occupational Safety and Health Structural Standards.
The Industrial Safety and Health Act of Japan (Act No. 57 of 1972)
The Ordinance on Industrial Safety and Health (Ministry of Labor Ordinance No. 32, 1972)
Structural rules for grinding machines, etc. (March 8, 1971, Ministry of Labor Notification No. 8, Partly September 30, 1965, Ministry of Labor Notification No. 85)
1. Check the specification display on the air grinder main body and grinding wheel cover. Maximum rotational speed without load, diameter / thickness / hole diameter of grinding wheels that can be used, rotation direction of grinding wheels, maximum peripheral speed of grinding wheels.
2. For grinders with a speed governing device (governor), periodically check the rotational speed to see if it is operating properly to maintain the normal rotational speed, and if there is an abnormality, immediately prohibit the use.
3. Be sure to use the specified flanges and covers for the grinding wheels, check whether the mounting conditions are normal, and prohibit use immediately if there are any abnormalities such as non-specified dimensions, quality defects, wear, or parts shortage.
4. Use grinding wheels of quality and strength that meet the regulations, and prohibit the use of grinding wheels that have abnormalities such as damage or deterioration.
5. Install, replace and test the grinding wheels in a specific safe place with a specific responsible person.
Be sure to perform a test run for 1 minute before the start of grinding work and 3 minutes after replacing the grinding wheels in a specific safe place to check for any abnormalities.
6. Take great care not to exceed the specified rotational speed of the grinder, and do not increase the air pressure used above the specified value to increase the rotational speed.
7. Be sure to properly attach the appropriate grinding wheel cover to the air grinder that uses a grinding wheel with a diameter of 50 mm or more.
8. Never use at a rotational speed higher than the maximum operating speed indicated on the grinding wheel.
9. Do not use the sides of the grinding wheels other than the intended purpose of the grinding wheels.
| Part Number |
|---|
| UG-25NA |
| UG-25NSA |
| Part Number | Price | Minimum Order Qty. | Volume Discount | Days to Ship | Number of load-free rotations (rpm) | Overall Length (mm) | Air Consumption Amount (m³/min) | Ventilation Direction | Trusco Code | Mass (g) |
|---|---|---|---|---|---|---|---|---|---|---|
₹ 25,975.67 | 1 Piece(s) | 5 Day(s) or more | 23500 | 153 | 0.3 | Side | 211-5981 | 540 | ||
₹ 26,358.27 | 1 Piece(s) | 5 Day(s) or more | 23500 | 145 | 0.3 | Side | 211-5999 | 560 |
Loading...
Basic Information
| Product Type | Normal Type | Chuck inner diameter(mm) | 6 | Operating Air Pressure(Mpa) | 0.6 |
|---|---|---|---|---|---|
| Hose Take-in Port | Rc1/4 |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Payment Method
- Credit Card
-
- Debit Cart
-
- Net Banking
-
- UPI
-
- Cheque on delivery
-
- Online payment
-
Social Media
MISUMI India Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy
Thank you for your cooperation.
Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.
Privacy Policy