Dial Gauge / Magnet Holder for Mounting Test Indicator Arm Type / Hand Fine Adjustment System
Brand :
NOGA_JAPAN
Caution
Product Description
Magnet holder with one-touch manual fine-motion feed mechanism.
[Features]
·Due to the use of a uniquely designed disc spring bearing, the clamping force of the arm is strong and the entire arm is strongly locked.
·A ⌀8 mm hole and dovetail groove are provided at the tip of the arm.
·A ⌀6 × ⌀8 mm adapter is included, so it can be used with a ⌀6 mm stem test indicator.
·Comes with a strong on/off magnet.
·The arm has a black finish finish.
·A holder for test indicators and dial gauges.
·A one-touch manual fine-motion feed mechanism is attached right above the magnet.
·It is possible to instantly zero-point the gauge without touching the arm.
[Applications]
·Ideal for holding test indicators and dial gauges.
Features
●Since the gauge's fine adjustment feed device is located right above the magnet, zero point alignment of the gauge can be made instantaneously without hand shake.●Since the fine adjustment screw can move around the entire circumference, you can tilt the
Specification
●Adhesion Strength（N）:320●Magnet W x D x H（mm）:30 x 40 x 35
●SPQ（piece）:1
●Arm Mounting Screws: cannot be detached
●Measuring Equipment Mounting: 8mm hole, with dovetail groove and adapter（6 x 8mm）
●Arm: Steel