Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(1 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

JR13WCC-6(71)

Shell Size Features Conforming cable outer diameter Days to Ship

Specification/Dimensions

Shell Size
13

16

25
Clear
Features
- Simple clamp
- Standard clamp
Clear
Conforming cable outer diameter(mm)
- φ6
- φ8
- φ10
- φ12
Clear

Days to Ship

All

5 Day(s) or Less
Clear

Specify Alterations

Corrosion-Resistant and Waterproof Circular Connector, JR-W Series (JR13WCC-6(71))

Brand :

Order Qty :
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

Product Description

The round connectors excellent in corrosion resistance and waterproof property. Ideal for interface with manufacturing machinery, transmission devices, etc.

[Features]
・Waterproof structure. Contacts are water-resistant up to a depth of 1.8 m for up to 48 hours when mated, and constructed to prevent the entry of water (IP64 and above). Contacts also excel at corrosion resistance.
・Black chrome is plated on the outer metallic portion in an effort to prevent corrosion.
・Smooth mating: 5 guides in the mating portion allow for exceptionally smooth mating.
・Rich variation: JR-W type connectors offer a variety of shell sizes, core numbers, and more.
・Also, there is also an assortment of cable clamps and sizes to respond to a wide variety of applications.

Circular Connectors With A Wide Variety of Shell Sizes and Contact Numbers

Can be used for the interfaces of machine tools, communications equipment, etc.

Main Features of JR-W Series Circular Corrosion-Resistant and Waterproof Connectors

Main Specifications

Connector Type	Plug, receptacle, jack, accessories, other
Panel Mounting Method	Screw, bulkhead, bulkhead (rear mount)
Waterproof performance	IP68
Number of Contacts	16, 3, 5, 10, 7, 24, 4
Contact Plating	Silver
Number of Matings and Un-Matings	500, 100
Rated Current	10, 5, 30, 15 A
Rated Voltage (AC)	250, 100, 200, 300 V AC
Rated Voltage (DC)	350, 140, 280, 420 V DC
Opening Direction	Straight
Wiring Method	Solder, crimp
Locking Method	Screw fastening
Compatible Wire Size (AWG) Max.	AWG16, 20, 10, 12
External Material	Metal
Operating Temperature Range (Max.)	85℃
Operating Temperature Range (Min.)	-25, -40°C

Product Standards (1)

Rating	Rated Current	Shell Size	Number of Contacts	Rated Current
		13	3	10 A
		13	5	5 A
		16	7	10 A
		16	10	5 A (crimp type 3 A)
		21	10	10 A
		21	16	5 A
		25	4	30 A
			16	10 A
			24	5 A (crimp type 3 A)

Rating	Rated Current	Shell Size	Number of Contacts	Rated Current
		13	3	100 V AC, 140 V DC
		13	5	100 V AC, 140 V DC
		16	7	100 V AC, 140 V DC
		16	10	100 V AC, 140 V DC
		21	10	100 V AC, 140 V DC
		21	16	100 V AC, 140 V DC
		25	4	300 V AC, 420 V DC
		25	16, 24	100 V AC, 140 V DC

Rating	Operating Temperature Range	-25 to +85°C
Rating	Storage temperature range	-10 to +60°C

Product Standards (2)

Item	Standard	Conditions
1. Contact resistance	5 mΩ or less JR16-10-pin crimp type: 10 mΩ or less JR25-24-pin crimp type: 10 mΩ or less	Measure at 1 A DC
2. Insulation resistance:	1,000 MΩ or more JR25-4-Pin: 10,000 MΩ or more	Measure at 500 V DC
3. Withstand voltage	There shall be no flashover or dielectric breakdown	1,000 V AC for 1 min. JR25-4-pin: 3,000 V AC for 1 min.
4. Vibration resistance	There shall be no electrical discontinuity for 10 μs or greater	Test at 10 to 55 Hz/cycle, Single amplitude: 0.75 mm Three directions, 2 hours each.
5. Shock	There shall be no electrical discontinuity for 10 μs or greater	Test at acceleration 490 m/s², duration: 11 ms, 6 axial directions, 3 times each.
6. Mating cycle	Contact resistance 5 mΩ or less JR16-10-pin crimp type: 10 mΩ or less JR25-24-pin crimp type: 10 mΩ or less	500 times
7. Temperature cycle	Insulation resistance 1,000 MΩ or more JR25-4-pin: 10,000 MΩ or more	Leave at -40°C: 30 mins. > Room temperature: 10 to 15 mins. > 100°C: 30 mins.> Room temperature: 10 to 15 mins. for a total of 5 cycles.
8. Humidity resistance	Insulation resistance 10 MΩ or more (at high humidity) 100 MΩ or more (when dry) JR25-4-pin: 100 MΩ or more (at high humidity) 1,000 MΩ or more (when dry)	Temperature: 40°C, relative humidity: 90 to 95%, left for 96 hours.
9. Waterproofing	No water penetration inside connector	Leave at water depth of 1.8 m for 48 hours while mated with the applicable connector.

Materials/Processing

Part Name	Materials	Finish	Note
Exterior	Aluminum alloy, brass	Black chrome plating	-
Insulator	Phenolic resin, PPS resin	-	UL94V-0
Contacts	Copper alloy	Silver plating	-
Waterproof packing	Nitrile rubber, silicone rubber	-	-

Product Wiring Procedure (Plug Side)

Wiring procedure (plug side) schematic

Work Procedure

1. Connector Disassembly
(1) To remove the plug, remove the set screw, fit an applicable receptacle to the P shell unit to fix, and remove the cord tube.
(2) To remove the cord clamp, remove the 2 cord tightening screws. (Note 1)
2. Wiring
2-1 Solder Type
(1) Use the cable so that the conductor can be soldered properly into the solder pot and with the applicable cable sheath diameter used for each cord clamp.
(2) After terminal processing the cable to the dimensions shown in Table-1, apply the fastening bracket, washer, gasket, cord tube, and coupling in that order to the cable in the direction shown in the above diagram.
(3) Solder the wires to connect the conductors to the terminals of the P shell unit. Shrinkable tube is recommended to be used at the connecting part because insulating performance might deteriorate due to solder whiskers or dewing. After connecting, adjust so that the dimensions of the C portion are satisfied. (Note 2)
2-2 Crimping Type
(1) Make sure to use a cable with the correct outer diameter for the cord clamp. It is also important that the conductor and its outer diameter are appropriate for the crimp contacts.
(2) After terminal processing the cable to the dimensions shown in Table-2, apply the fastening bracket, washer, gasket, cord tube, and coupling in that order to the cable in the direction shown in the above diagram.
(3) After crimping the applicable crimping contacts onto the conductor, insert the crimping contacts into the contact holes of the P-shell unit. After inserting, adjust so that the dimensions of the C portion are satisfied. (Note 2)
3. Connector Assembly
(1) Fit the connected P shell unit to the receptacle fixed with a vice or the like and insert into the coupling and cord tube. Torque the cord tube to the level as given in Table-3.
(2) Fit the gasket, washer and clamp. Torque the clamp to the level as given in Table-3 while ensuring the cable does not rotate.
(3) Torque the set screw to 0.2 to 0.25 N·m.
(4) Torque the cord tightening screw (two positions) to 0.65 to 0.7 N·m. (Note 1) (Note 3)

Note 1. Not required if a simple type cord clamp is used.
Note 2. Maintain these dimensions until assembly is complete.
Note 3. Cable clamping force, cable rotation force, and others aspects including waterproof performance may differ depending on the cable construction. Verify the suitability of the cable assembly before use or production.

Units: mm

Shell Size	A	B	C
13	(3)	(12)	37 or less
16	(3)	(14)	39 or less
21	(3)	(17)	42 or less
25	(3)	(20)	45 or less

Table-1 (solder type)

Units: mm

Shell Size	Number of Contacts	A	B	C
16	10	3.5 to 4	(19)	39 or less
21	10	4 to 4.5	(22)	42 or less
21	16	3.5 to 4	(22)	42 or less
25	24	3.5 to 4	(25)	45 or less

Table-2 (crimp type)

Units: N·m

Shell Size	Tightening torque
13	2 to 2.5
16	3 to 3.5
21	4 to 4.5
25	5 to 5.5

Table-3

Contact Position Arrangement and Main Functions

1. Figures are views of contact arrays of the mating end of male connectors.
*2 The withstand voltage indicates the test voltage value.

Shell sizes 13, 16

Shell size 21

Shell size 25

Product Usage Precautions

1. Make sure the power is off before mating or un-mating the connector.
2. Use connectors with socket (female) contacts at the power side of the circuit.
3. Always use the screw lock function of the connector (state when tightened to maximum degree.)
4. Use connectors in combination with other waterproof types.

: 30; 45; 60

Part Number
JR13WCC-6(71)

Part Number	Price	Minimum Order Qty.	Volume Discount	Days to Ship	Shell Size	Features	Conforming cable outer diameter (mm)
	₹ 780.80	1 Piece(s)		5 Day(s) or more	13	Standard clamp	φ6

Basic Information

Connector Shape	Round shape	Connector series initials	J/K/L	J/K/L	JR
Protection function (environmentally resistant)	IP67	Plating of part touching terminal	NA	Product Category	Cord clamp
Operating Temperature Range(°C)	-25 to +85

Please check the type/dimensions/specifications of the part JR13WCC-6(71) in the Corrosion-Resistant and Waterproof Circular Connector, JR-W Series series.

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Product variants

Part Number
JR16WCC-10(71)
JR16WCC-12(71)
JR16WCC-6(71)
JR16WCC-8(71)
JR25WCC-10(71)
JR25WCCA-8(71)

Standard Unit Price	Minimum order quantity	Days to Ship	Shell Size	Features	Conforming cable outer diameter (mm)
₹ 715.18	1 Piece(s)	5 Day(s) or more	16	Standard clamp	φ10
₹ 719.24	1 Piece(s)	5 Day(s) or more	16	Standard clamp	φ12
₹ 1,128.00	1 Piece(s)	5 Day(s) or more	16	Standard clamp	φ6
₹ 999.20	1 Piece(s)	5 Day(s) or more	16	Standard clamp	φ8
₹ 1,244.80	1 Piece(s)	5 Day(s) or more	25	Standard clamp	φ10
₹ 1,575.71	1 Piece(s)	5 Day(s) or more	25	Simple clamp	φ8

Search by Category / Brand

Search by Category

How can we improve?