Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(4 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

NAH-06-472

Rated Current H Leak current value Mounting Method CAD Days to Ship

Specification/Dimensions

Rated Current(A)
6

10

16

30
Clear
H(mm)
41

48
Clear
Leak current value(mA　max)
0.5(250V60Hz)

1(250V60Hz)
Clear
Mounting Method
- DIN Rail
- Fasten With Screws
Clear
CAD
- 2D
Clear

Days to Ship

All

5 Day(s) or Less
Clear

Specify Alterations

NAH Series, Single-Phase Noise Filter (For General Purpose / 1-step Filter / Low-pass Attenuation)

Brand :

Order Qty :
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

Product Description

Push-down terminal block 10KHz-1MHz high attenuation (NAH)

[Features]
· 150kHz-1MHz high damping type.
· Single phase 250V.
· Quick and easy push-down terminal block adoption (patent and design registration pending) (with screw shedding prevention function)

INDEX

Basic specifications and features of the product

Property performance information

Drawing

Features of NAH series

NAH series

10 kHz to 1 MHz high attenuation type
Single-phase 250 V
It uses a quick and easy push-down terminal block (With screw fall prevention function)

Ordering information

1 Series name
2 Rated current
3 Ground capacitor code

* The attenuation characteristic differs depending on the ground capacitor code.

4 Option D: DIN rail mounting type

* The external shape differs when the option is set. Please refer to the drawing.

Ground capacitor code

Code	Leakage current Input 125/250 V 60 Hz	Capacitor capacity (Nominal value)
000	5 µA / 10 µA max	N/A
101	12.5 µA / 25 µA max	100 pF
221	25 µA / 50 µA max	220 pF
331	37.5 µA / 75 µA max	330 pF
471	50 µA / 100 µA max	470 pF
681	75.5 µA / 150 µA max	680 pF
102	0.13 mA / 0.25 mA max	1,000 pF
222	0.25 mA / 0.5 mA max	2,200 pF
332	0.38 mA / 0.75 mA max	3,300 pF
472	0.5 mA / 1.0 mA max	4,700 pF

Product specifications

Item	NAH-06-472	NAH-10-472	NAH-16-472	NAH-20-472	NAH-30-472
Rated Voltage〔V〕	AC 1⌀ 250/DC250
Rated current〔A〕	6	10	16	20	30
Test voltage (Between terminals and mounting plates)	2,500 V AC (cutoff current = 20 mA), 1-minute, normal temperature normal humidity
Insulation resistance (Between terminals and mounting plates)	500 V DC 100 MΩ min normal temperature normal humidity
Leakage current 125/250 V 60 Hz	0.5 mA / 1.0 mA max
Voltage drop	1.0 V max
Safety standard certified temperature	—25 to +85°C (Refer to the derating characteristics)
Operating Temperature	—40 to +85°C (Refer to the derating characteristics)
Operating Humidity	20 to 95%RH (No condensation)
Storage temperature/humidity	—40 to +85°C, 20 to 95%RH (No condensation)
Vibration	10 to 55 Hz, 19.6 m/s^2 (2 G), period 3 minutes X, Y, Z direction 1 hour each
Impact	196.1 m/s^2 (20 G) 11 ms X, Y, Z direction 1 time each
Safety Standard	UL1283, CSA C22.2 No.8 (C-UL), DIN EN60939 VDE0565 Teil 3-1, ENEC (Except for DC input)
External dimensions (excluding protrusions) / weight	53 × 41 × 92 mm (W × H × D) / 300 g max (Option: for -D, refer to the drawing)

Circuit Configuration

Derating characteristics

Drawing

Since this product uses a push-down terminal block, it is shipped in the following conditions.
1 Terminal block cover is stored.
2 Terminal block screw is retained on the upper side.

Standard type

DIN rail mounting type

* Tolerance: ±1
* Weight: 300 g max
* Mounting plate material: Steel (surface treatment: nickel plating) t = 1.0
* Case material: PBT
* Unit mm
* Terminal block tightening torque M4: 1.6 N⋅m (16.9 kgf⋅cm) max

Precautions for mounting DIN rail

Grounding through a DIN rail may not provide the proper noise attenuation effect.
Grounding should be done by connecting to the protective ground terminal (PE) of the noise filter main body.
There are 2 protective ground terminals, but you can use it even by connecting only one of them.

Precautions for mounting DIN rail

Characteristic data (Representative example)

NAH-06-472