• Due to the typhoon(Hagibis) in Japan, delivery of some products may be delayed. We apologize for any inconvenience and thank you for your understanding
  • MISUMI India HO Gurgaon & Pune regional office will be closed on 21st Oct, 2019 on account of assembly elections in Haryana & Maharashtra constituencies.

Interface Terminal Block , Standard Type, 8.5mm Pitch

Interface Terminal Block ,  Standard Type,   8.5mm Pitch

Wires of 2 mm2, one size larger, can also be wired in case of issues such as voltage drops, etc.

[Features]
· A standard 1-to-1 wiring connection type interface terminal block.
· A space-saving design with a terminal pitch of just 7 mm. Features a horizontal width of 150 mm, even with the 40 pole type. Despite its small size, it can be used with JIS standard crimp terminals.
· Types which use a fall prevention screw structure that ensures screws will not fall, even if turned upside down, are also available.
· Features a terminal pitch of 8.5 mm, designed with an emphasis on workability. Ensures sufficient space between the terminal screws on the upper and lower levels, enabling the terminal screws on the lower level to be tightened after wiring.
· The wiring on the lower level can also be replaced without having to remove the wiring on the upper level.
· Wires of 2 mm2, one size larger than other series wires, can also be wired in case of issues such as voltage drops, etc.
· Types with a terminal pitch of 3.8 mm or 5 mm and that use press-tightening screws are also available. These helps improve space saving and size-reducing measures.

PDF

Part Number

Configured Part Number is shown.

TIFA834MH

Part Number
TIFA834MH
Part NumberVolume DiscountDays to ShipConnector Number of Poles
(Pole)
Supported equipment Supported equipment manufacturer Representative Standard Dimension width
(mm)
Connector manufacturer
19 Day(s) or more MIL Connector34PLCKEYENCECE / TUV163Hirose

Loading...

  1. 1

Basic Information

Terminal Block Screw M3.5 Mounting Method DIN rail/Direct attachment Pitch Between Terminals(mm) 8.5
Dimension vertical(mm) 55 Dimension depth(mm) 51 Terminal Block Shape Standard Form

Please check the type/dimensions/specifications of the part TIFA834MH in the Interface Terminal Block , Standard Type, 8.5mm Pitch series.

Product variants

Part Number
TIFA820MH
TIFA830MH
TIFA840F360
TIFA840MH
TIFA850MH
Part NumberVolume DiscountDays to ShipConnector Number of Poles
(Pole)
Supported equipment Supported equipment manufacturer Representative Standard Dimension width
(mm)
Connector manufacturer
6 Day(s) or more MIL Connector20PLC/servo otherOmron / Mitsubishi Electric / Panasonic Electronic Works / KEYENCECE / TUV95Hirose
22 Day(s) or more MIL Connector30PLC/servo other-CE / TUV138Hirose
19 Day(s) or more FCN Connector40PLC/servo otherOmron / Mitsubishi Electric / KEYENCECE180Fujitsu
6 Day(s) or more MIL Connector40PLC/servo otherOmron / Mitsubishi Electric / Panasonic Electronic Works / KEYENCECE / TUV180Hirose
19 Day(s) or more MIL Connector50Servo Motor-CE / TUV223Hirose

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
TEL:124- 468-8841 / FAX:124-468-8811
9:00am - 5:30pm (Monday -Saturday)