Regulator Push-Lock Type

Brand :

PISCO

Caution

The product images are representative only. Specifications may vary by part number, including shape and color.

Product Description

[Features]
· Push-lock type knob allows for easy fixing and pressure adjustment operation with one hand
· Ideal for preventing loosening of the lock nut due to machine vibration, etc.
· New structure increases flow rate by approximately 1.3 times compared to existing products. Further reduction in pressure fluctuation range
· Equipped with a relief mechanism convenient for equipment adjustment
· Equipped with a backflow mechanism. Can be installed between the solenoid valve and actuator and used as a check-type regulator.
· A type with a pressure gauge is also available.

Drawing

RVCP elbow

Unit: mm

Type	Tube outer diameter ⌀D	R	A	B		L1		L2	L3	⌀p1	⌀p2
Type	Tube outer diameter ⌀D	R	A	Max.	Min.	Max.	Min.	L2	L3	⌀p1	⌀p2
RVCP4-M5	4	M5 x 0.8	3	70	67.4	67	64.4	24.2	8.5	11.5	15
RVCP4-01	4	R1/8	8	71.5	68.9	67.5	64.9	24.7	9	11.5	15
RVCP6-M5	6	M5 x 0.8	3	70	67.4	67	64.4	24.2	8.5	11.5	15
RVCP6-01		R1/8	8	71.5	68.9	67.5	64.9	24.7	9	11.5	15
RVCP6-02		R1/4	11	78.2	75.6	72.2	69.6	29	11	15.5	19
RVCP8-01	8	R1/8	8	71.5	68.9	67.5	64.9	24.7	9	15.5	15
RVCP8-02	8	R1/4	11	78.2	75.6	72.2	69.6	29	11	15.5	19

Unit: mm

Type	Tube stop C	E1	E2	Width across flats H	K	Release ring			Weight (g)
						⌀Z	X	Y
RVCP4-M5	11	20.7	8.5	14	6	-	9.8	7.8	26
RVCP4-01					5
RVCP6-M5	11.6	21.1	8.5	14	6	-	11.8	9.8	26
RVCP6-01					5
RVCP6-02	17	29.8	10.5	17	6	11.8	-	-	46
RVCP8-01	18.1	27.7	8.5	14	5	13.8	-	-	29
RVCP8-02		29.7	10.5	17	6				46

* The L1 and L2 dimensions of the tapered thread type are reference dimensions after tightening the thread.

RVCMP Elbow with Pressure Gauge

Unit: mm

Type	Tube outer diameter ⌀D	R	A	B		L1		L2	L3	L4	⌀p1	⌀p2
Type	Tube outer diameter ⌀D	R	A	Max.	Min.	Max.	Min.	L2	L3	L4	⌀p1	⌀p2
RVCMP4-M5	4	M5 x 0.8	3	70	67.4	67	64.4	48.7	24.2	8.5	11.5	15
RVCMP4-01	4	R1/8	8	71.5	68.9	67.5	64.9	49.2	24.7	9	11.5	15
RVCMP6-M5	6	M5 x 0.8	3	70	67.4	67	64.4	48.7	24.2	8.5	11.5	15
RVCMP6-01		R1/8	8	71.5	68.9	67.5	64.9	49.2	24.7	9	11.5	15
RVCMP6-02		R1/4	11	78.2	75.6	72.2	69.6	56.3	29	11	15.5	19
RVCMP8-01	8	R1/8	8	71.5	68.9	67.5	64.9	52	24.7	9	15.5	15
RVCMP8-02	8	R1/4	11	78.2	75.6	72.2	69.6	56.3	29	11	15.5	19

Unit: mm

Type	Tube stop C	E1	E2	E3	Width across flats H	K	Release ring			Weight (g)
							⌀Z	X	Y
RVCMP4-M5	11	26.3	8.5	16.2	14	6	-	9.8	7.8	29
RVCMP4-01						5
RVCMP6-M5	11.6	26.7	8.5	16.2	14	6	-	11.8	9.8	29
RVCMP6-01						5
RVCMP6-02	17	30	10.5	17.7	17	6	11.8	-	-	49
RVCMP8-01	18.1	28.4	8.5	16.2	14	5	13.8	-	-	31
RVCMP8-02		29.9	10.5	17.7	17	6				49

* The L1 and L2 dimensions of the tapered thread type are reference dimensions after tightening the thread.

RVUP Union

Unit: mm

Type	Tube outer diameter ⌀D1	Tube outer diameter ⌀D2	B		L1	L2	L3	⌀p1	⌀p2	⌀p3	Tube stop C1	Tube stop C2	E1	E2
			Max.	Min.
RVUP4-4	4	4	61.6	59	13	18.8	1	11.5	11.5	15	11	11	21.6	21.6
RVUP6-4	6	4	61.6	59	13	18.8	1	11.5	11.5	15	11.6	11	22	21.6
RVUP6-6		6										11.6		22
RVUP8-6	8	6	65.7	63.1	15	22.5	-	15.5	15.5	19	18.1	17	28.6	28.7
RVUP8-8		8										18.1		28.6

Unit: mm

Type	F1	F2	F3	F4	F5	F6	F7	T1	T2	Release ring						Weight (g)
										⌀Z1	X1	Y1	⌀Z2	X2	Y2
RVUP4-4	15	30	4.2	17	10.3	20.6	8	24.5	15	-	9.8	7.8	-	9.8	7.8	19
RVUP6-4	15	30	4.2	17	10.3	20.6	9	24.5	15	-	11.8	9.8	-	9.8	7.8	20
RVUP6-6														11.8	9.8
RVUP8-6	19.8	39.6	4	21.5	11.7	23.4	13	28.4	19	13.8	-	-	11.8	-	-	32
RVUP8-8													13.8			33

*The mounting holes and mounting dimensions are unchanged from the current model.

RVUMP Union with Pressure Gauge

Unit: mm

Type	Tube outer diameter ⌀D1	Tube outer diameter ⌀D2	B		L1	L2	L3	L4	⌀p1	⌀p2	⌀p3	Tube stop C1	Tube stop C2	E1	E2
			Max.	Min.
RVUMP4-4	4	4	61.6	59	43.3	13	18.8	1	11.5	11.5	15	11	11	21.6	30.6
RVUMP6-4	6	4	61.6	59	43.3	13	18.8	1	11.5	11.5	15	11.6	11	22	30.6
RVUMP6-6		6											11.6		31
RVUMP8-6	8	6	65.7	63.1	49.8	15	22.5	-	15.5	15.5	19	18.1	17	28.6	33
RVUMP8-8		8											18.1		32.9
RVUMP1/4-1/4	1/4	1/4	61.6	59	43.3	13	18.8	1	11.5	11.5	15	11.4	11.4	22.2	31.2

Unit: mm

Type	F1	F2	F3	F4	F5	F6	F7	F8	T1	T2	Release ring						Weight (g)
											⌀Z1	X1	Y1	⌀Z2	X2	Y2
RVUMP4-4	15	30	4.2	17	10.1	20.2	10.2	9	24.5	15	-	9.8	7.8	-	9.8	7.8	23
RVUMP6-4	15	30	4.2	17	10.1	20.2	10.2	9	24.5	15	-	11.8	9.8	-	9.8	7.8	23
RVUMP6-6															11.8	9.8
RVUMP8-6	19.9	39.7	4.1	21.3	11.6	23.2	9.1	13	28.4	19	13.8	-	-	11.8	-	-	36
RVUMP8-8														13.8
RVUMP1/4-1/4	15	30	4.2	17	10.1	20.2	10.2	9	24.5	15	-	11.8	9.8	-	11.8	9.8	23

*The mounting holes and mounting dimensions are unchanged from the current model.

Product Specification

Tube size	Metric size	Inch size
Operating fluid	Air
Operating pressure range	0-1.0 MPa	0 to 145 psi
Set pressure range	0.1-0.8 MPa	14.5-116 psi
Indicated pressure range	0 to 0.8 MPa	0 to 116 psi
Accuracy (gauge)	+/- 5% (F.S)
Operating temperature range	0 to 60℃ (no freezing)

*For inch-size models, the pressure gauge unit is psi.

Structural Drawing

■ elbow type: for RVCP

Pressure Regulating Valve Method

1. Adjusting the pressure

Release the lock by pulling the regulating knob upward before adjusting the pressure.
Do not apply more force than necessary to the pressure regulating knob at this time. This may cause damage.

Regulator Push-Lock Type Pressure Regulating Valve Adjustment Method

2. When increasing the pressure

Turn the regulating knob clockwise from the fully open position to increase the pressure.
Once the desired pressure is reached, be sure to press the regulating knob and lock it to prevent the set pressure from changing.

3. Decreasing the pressure

If the regulating knob is turned too far (if the pressure is too high), turning it counterclockwise will activate the relief mechanism and decrease the pressure.
  Following this, adjust as described in "2. Increasing the pressure."
  Once the desired pressure is reached, be sure to press the adjustment knob and lock it to prevent the set pressure from changing.

Precautions

Warning

1. Do not use the regulator in such a way that the pressure exceeds the preset level due to large pressure fluctuations on the outlet side. This product is not designed as a relief valve, and using it as one may cause equipment damage or malfunction. In such cases, please install a separate safety device before use.

Caution

1. Perform the pressure setting by turning the regulating knob in the upward direction (clockwise). The pressure cannot be set accurately if the regulating knob is turned in the downward direction (counterclockwise).

2. Do not turn the regulating knob counterclockwise from a fully open position, or too far clockwise from a fully closed position. Doing so may damage the regulating knob or the main body. It can also increase the torque on the regulating knob due to the sticking of the regulating screw and regulating nut.

3. The regulating knob locks when pushed down and releases when pulled up. After adjusting, be sure to set it to the locked position. Failure to lock the knob means the knob may turn, causing the pressure to change.

4. When you press down the regulating knob, it can sometimes stop partway between the locked and unlocked positions depending on how far round it is rotated. When this happens, the knob is not completely locked. Please ensure that the regulating knob is fully pushed down to the locked position.

5. Trying to force the knob to turn while it is in the locked position may cause damage to the lock mechanism.

6. For models with a gauge, the gauge can be oriented in any direction. Applying excessive force to the gauge cap can result in damage to the gauge and cause issues with gauge readings. Please hold the gauge close to the base when turning it.

7. The pressure gauge accuracy is +/- 5% (FS). If greater accuracy is required, please check the pressure using a separate pressure gauge and adjust accordingly.

8. When open air is released from the outlet, the flow rate may cause resonance. Avoid releasing open air on the outlet for prolonged periods of time, as this poses a risk of internal damage or other issues.