MiSUMi
Loading...

Thermac Temperature Controller [E5CB]

Brand :
OMRON

Caution

    Product Description

    Ideal for heater control, best control performance at surprisingly low cost! Easy to read with one of the largest character displays in the world.
    [Features]
    · Improved visibility with character height of approx. 16 mm.
    · Fewer parameters for simple setup.

    Dimensional Drawing of OMRON Temperature Controllers

    THERMAC Temperature Controller [E5CB] Outline drawing
    • Crimp Temperature Controllers size: M3.5
    • Terminal cover (sold separately) (Model E53-COV19)
    • USB-serial conversion cable (sold separately) (Model: E58-CIFQ2)

    Specification Table of OMRON Temperature Controllers

    Temperature Controllers Ratings/Performance

    Rating

    Power supply voltageAC100~240V 50/60Hz, AC24V 50/60Hz, DC24V
    Allowable voltage fluctuation range85 to 110% of rated voltage
    Power ConsumptionApprox. 3.5VA (AC100-240V)
    Approx. 3.5VA (AC 24V)
    Approx. 2.5W (DC24V)
    Temperature Controllers Sensor TypeThermocouple: K, J, T, R, S (JIS C 1602-1995, IEC60584-1)
    Platinum resistance thermometer: Pt100 (JIS C 1604-1997, IEC60751)
    Temperature Controllers OutputRelay OutputAC250V 3A (resistive load) Electrical life 100,000 times Minimum applicable load 5V 10mA
    Voltage output (for driving SSR)Output voltage DC12V+25%/-15% Maximum load current 21mA
    Alarm OutputRelay OutputAC250V 1A (resistive load)
    Temperature Controllers Method2 degrees of freedom PID or ON/OFF
    Setting methodDigital setting by front keys
    Instruction method7-segment digital display and single-light-emitting display
    character height PV: 16.2 mm
    Other featuresTemperature Controllers input correction, run/stop, protection function, etc.
    Ambient temperature-10 to +55°C (but no condensation or freezing) / 3-year warranty: -10 to +50°C
    Ambient humidityRelative humidity: 25-85%
    Storage Temperature Controllers-25 to +65°C (but no condensation or freezing)

    Temperature Controllers Performance

    Indication accuracyThermocouple: *1 (±0.5% of indicated value or ±1°C, whichever is greater) ±1 digit or less
    Platinum resistance thermometer: (±0.5% of indicated value or ±1°C, whichever is greater) ±1 digit or less
    Temperature effect *2Thermocouple input (R, S): (±1% PV or ±10°C, whichever is greater) ±1 digit or less
    Thermocouple input (K, J, T): (±1% PV or ±4°C, whichever is greater) ±1 digit or less
    Platinum resistance thermometer input: (±1% PV or ±2°C, whichever is greater) ±1 digit or less
    Voltage effect *2
    Effects of electromagnetic interference (according to EN61326-1)
    Adjustment Sensitivity0.1 to 999.9°C or °F (in 0.1°C or °F increments)
    Proportional band (P)0.1 to 999.9°C or °F (in 0.1°C or °F increments)
    Integration time (I)0 to 3999s (in 1s increments)
    Differential time (D)0 to 3999s (in 1s increments)
    Temperature Controllers Period0.5, 1 to 99 s (in 1 s increments)
    Alarm Setting Range-1999 to 9999 (decimal point position depends on input type)
    Input Sampling Period250ms
    Effect of signal source resistanceThermocouple: 0.1℃/Ω or less (100Ω or less), Platinum resistance thermometer: 0.6℃/Ω or less (10Ω or less) *3
    Insulation resistance20MΩ or more (at DC500V megger)
    Withstand voltage2,300V AC, 50 or 60Hz, 1min (opposite polarity live terminals)
    vibrationmalfunction10~55Hz 20m/s2 3 axis direction 10min
    Durability10~55Hz 20m/s2 3 axial directions 2h
    impactmalfunction200m/s23 axial directions, 3 times each
    Durability300m/s23 axial directions, 3 times each
    massMain unit: Approx. 100g Mounting tool: Approx. 10g
    Protective structureFront: IP66, Rear case: IP20, Terminal: IP00
    Memory ProtectionNon-volatile memory (number of writes: 100,000)
    standardCertification StandardsUL61010-1, CSA C22.2 No.1010-1
    Temperature Controllers Compliance standardsEN61326, EN61010-1, IEC61010-1, VDE0106,
    Part100 (finger protection) when terminal cover is attached
    EMC DirectiveEMI EN61326-1 *4Radiated
    interference field strength EN55011 Group1 classANoise
    terminal voltage EN55011 Group1 classAEMS
    EN61326-1 *4Electrostatic
    discharge immunity EN61000-4-2Electromagnetic
    field immunity EN61000-4-3Burst noise immunity
    EN61000-4-4Conducted
    interference immunity EN61000-4-6Surge
    immunity EN61000-4-5Voltage
    dip/interruption immunity EN61000-4-11

    *1. K and T below -100°C are within ±2°C±1 digit. R and S below 200°C are within ±3°C±1 digit.
    *2. Conditions: Ambient Temperature Controllers: -10°C to 23°C to 55°C Voltage range: -15% to ±10% of rated voltage
    *3. R and S sensors are 0.2°C/Ω or less (100Ω or less).
    *4. Industrial electromagnetic environment (EN/IEC61326-1 Table 2)



    specification of Temperature Controllers

    Temperature Controllers Model numbersizePower supply voltageSensor TypeAlarm OutputTemperature Controllers Output
    Temperature Controllers Model E5CB-R1TCTemperature Controllers Model E5CB
    48 x 48 mm    		AC100-240VThermocouples1Relay Output
    Temperature Controllers Model E5CB-R1PPlatinum resistance thermometer
    Temperature Controllers Model E5CB-Q1TCThermocouplesVoltage output (for driving SSR)
    Temperature Controllers Model E5CB-Q1PPlatinum resistance thermometer
    Temperature Controllers Model E5CB-R1TCDAC/DC24VThermocouplesRelay Output
    Temperature Controllers Model E5CB-R1PDPlatinum resistance thermometer
    Temperature Controllers Model E5CB-Q1TCDThermocouplesVoltage output (for driving SSR)
    Temperature Controllers Model E5CB-Q1PDPlatinum resistance thermometer

    Selection Support Information of OMRON Temperature Controllers

    Temperature Controllers Order Example



    Thermaq Temperature Controller [E5CB] Order Example
    Thermaq Temperature Controller [E5CB] Order Example