[In Stock] Guided cylinder TCL/TCM series

Brand :

AIRTAC

Caution

There are part numbers where the P at the end of the part number has been removed due to changes in the manufacturer's part numbers.
The "P" at the end of the part number previously indicated the PT thread specification, but since this product now comes standard with the PT thread specification, there is no change in specification due to the part number change.

Product Description

[Features]
· JIS standard.
· Two types of bearing sections to suit the use: Ball bushing: Compatible with lifters, pushers, and manufacturing processes that require low friction. Sliding bearing: Lateral load capacity is more than twice that of conventional cylinders (stopper cylinders).
· Compatible with lateral load.
· Multiple types of mounting are possible. (Top surface, side surface, bottom surface, T-slot side).
· Convenient sensor switch groove.

Drawing

TCM6/TCM10

TCL/TCM12–63

Product Specification

Inner diameter (mm)		6	12	20	32	50
Operation method		Double Acting
Operating fluid		Air (please use air filtered with a 40 μm or finer filter)
Operating pressure range		0.15-0.7 Mpa (23 to 100 psi)	0.1 to 1.0 MPa (14 to 145 psi)
Proof pressure		1.2 MPa (175 psi)	1.5 MPa (215 psi)
Ambient temperature and operating fluid temperature		-20 to +70℃
Piston Speed		50-500 mm/s	30 to 500 mm/s
Stroke length tolerance		≤ 100 (0 to +1.0) > 100 (0 to +1.5)
Cushion		Rubber cushion
Non-rotational Accuracy [1]	Ball bushing	-	+/- 0.08°	+/- 0.07°	+/- 0.06°	+/- 0.05°
Non-rotational Accuracy [1]	Slip bearing	+/- 0.10°	+/- 0.10°	+/- 0.09°	+/- 0.08°	+/- 0.06°
Pipe connection port diameter [2]		M3 x 0.5	M5 x 0.8	1/8"	1/8"	1/4"
Applicable Sensor		DMSH(S) · CMSH	DMSG(S) · CMSG

[1] The non-rotating accuracy refers to the rotation angle of the plate when the piston rod is in the return position.
[2] PT type port threads are also available for selection.

Structure

[In Stock] Guide Cylinder TCL/TCM Series Structural Drawing 1

Number	Product Name
1	Main body
2	Plate
3	guide shaft
4	C type retaining ring
5	Rod cover
6	O-ring
7	Hex socket head cap screw
8	O-ring
9	O-ring
10	bushing

Number	Product Name
11	Rubber cushion
12	O-ring
13	Magnet
14	Magnet gasket
15	Piston
16	Piston rod
17	Rubber cushion
18	O-ring
19	Rubber cushion mounting block

[In Stock] Guided Cylinder TCL/TCM Series Structural Drawing 2

Number	Product Name
1	Plate
2	guide shaft
3	Main body
4	C type retaining ring
5	Rod cover
6	Rubber cushion
7	O-ring
8	Hex socket head cap screw
9	O-ring
10	Ball Bushing / Slide Bearing
11	C type retaining ring

Number	Product Name
12	O-ring
13	O-ring
14	Head cover
15	Piston rod
16	Piston
17	Magnet base
18	Magnet gasket
19	Magnet
20	Hex Socket Head Plug
21	Hex Socket Head Plug
22	bushing

Type information

TCL: Ball Bushing

[In Stock] Guide Cylinder TCL/TCM Series TCM: Sliding Bearing

TCM: Slide Bearing

Specifications Table

TCM6/TCM10

Inner Diameter/Symbol	A	AB	AC	AD	B	BA	C	CA	CB	D	G	K
6	29.5	6	23.5	5	30	29	14.5	9	6	5	20.5	M2.5 x 0.45
10	32	6	26	5	34	33	18	10	7.5	6	23	M3 x 0.5

Inner Diameter/Symbol	L	LA	LB	LC	LD	M	MA	MB	N	P	PD	PF
6	M3 x 0.5	5	20.5	6	9	6	3	9.5	3.5	M3 x 0.5	9.5	5.5
10	M4 x 0.7	5	23	8	11	8	4	8.5	4.5	M3 x 0.5	11.5	5

TCL/TCM12–63

Inner Diameter/Symbol	A					DA
Inner Diameter/Symbol	TCL	TCM	TCL/TCM			TCL				TCM
Stroke	≤ 30	≤ 50	31 to 100	101 to 200	> 200	≤ 30	31 to 100	101 to 200	> 200	≤ 50	51 to 100	101 to 200	> 200
12	42		55	85	-	0	13	43	-	0	13	43	-
16	46		65	95	-	0	19	49	-	0	19	49	-
20	53		80	104	122	0	27	51	69	0	27	51	69
25	53.5		82	104.5	122	0	28.5	51	68.5	0	28.5	51	68.5

Inner Diameter/Symbol	MC				KC
Inner Diameter/Symbol	MC				KC
Stroke	≤ 30	31 to 100	101 to 200	> 200	≤ 30	31 to 100	101 to 200	> 200
12	20	40	110	-	15	25	60	-
16	24	44	110	-	17	27	60	-
20	24	44	120	200	29	39	77	117
25	24	44	120	200	29	39	77	117

Inner Diameter/Symbol	A					DA
Inner Diameter/Symbol	TCL	TCM	TCL/TCM			TCL				TCM
Stroke	≤ 50	≤ 50	51 to 100	101 to 200	> 200	≤ 50	51 to 100	101 to 200	> 200	≤ 50	51 to 100	101 to 200	> 200
32	65	78	102	118	140	5.5	42.5	58.5	80.5	18.5	42.5	58.5	80.5
40	66	78	102	118	140	0	36	52	74	12	36	52	74
50	76	89	118	134	161	4	46	62	89	17	46	62	89
63	77	89	118	134	161	0	41	57	84	12	41	57	84

Inner Diameter/Symbol	MC				KC
Inner Diameter/Symbol	MC				KC
Stroke	≤ 40	41 to 100	101 to 200	> 200	≤ 40	41 to 100	101 to 200	> 200
32	24	48	124	200	33	45	83	121
40	24	48	124	200	34	46	84	122
50	24	48	124	200	36	48	86	124
63	28	52	128	200	38	50	88	124

Inner Diameter/Symbol	AB	AC	AD	B	BA	C	CA	D (TCL)	D (TCM)	G
12	13	29	8	58	56	26	22	6	8	41
16	13	33	8	64	62	30	25	8	10	46
20	16	37	10	83	81	36	30	10	12	54
25	16	37.5	10	93	91	42	38	12	16	64
32	22	37.5	12	112	110	48	44	16	20	78
40	22	44	12	120	118	54	44	16	20	86
50	28	44	16	148	146	64	60	20	20	110
63	28	49	16	162	158	78	70	20	20	124