Thermac S Electronic Temperature Controller [E5CS]

Drawing

Terminal arrangement

Product Specification

Power supply voltage		100 to 240 V AC 50/60 Hz 24 V AC 50/60 Hz / 24 V DC
Allowable Voltage Fluctuation Range		85 to 110% of power supply voltage
Power consumption		5 VA (100 to 240 V AC) 3 VA (24 V AC) / 2 W (24 V DC)
Input		Thermocouple type: K, J, L Platinum resistance thermometer type: Pt100, JPt100 Thermistor type: Model E52-THE** Multi-input type for thermocouples and platinum resistance thermometers : K, J, L, T, U, N, R, Pt100, JPt100
Control output	relay output	250 V AC 3 A (resistive load) 1c
	Voltage output (for SSR drive)	12 V DC 21 mA (with short circuit protection circuit)
Control method		ON/OFF, 2 flexibility PID (with automatic PID parameter setting function) shared
Alarm output		250 V AC 1 A (resistive load) 1a
Setting Method		Digital setting with front keys
Display Type		7-segment digital display (character height 13.5 mm) and deviation indication
Other functions		· Setting change prohibition (key protect) · Input correction · Display unit switching (°C/°F) · Direct/reverse operation switching · Temperature range, sensor switching (K/J/L, Pt100/JPt100),   For thermocouple/platinum resistance thermometer multi-input types,   switching between thermocouple and platinum resistance thermometer · Control Cycle switching · 8-mode alarm output · Sensor abnormality detection (excluding thermistor type)
Operating ambient temperature		-10 to +55°C (no freezing or condensation) / For 3-year warranty: -10 to +50°C
Operating ambient humidity		Relative humidity 25 to 85%
Storage temperature		-25 to +65°C (no freezing or condensation)

note. Do not use the output of an inverter as the power supply.

Performance

Indication Accuracy (ambient temperature 23°C)		thermocouple: *1 (+/-1% of indicated value or +/-2°C, whichever is larger) +/- 1 digit or less platinum resistance thermometer: *2 (+/-0.5% of indicated value or +/-1°C, whichever is larger) +/- 1 digit or less Thermistor: *3 (1% FS) +/- 1 digit or less
Effect of temperature		Thermocouple (R): (+/-2% PV or +/-10°C, whichever is greater) +/- 1 digit or less Other thermocouples: (+/-2% PV or +/-4°C, whichever is greater) +/- 1 digit or less Platinum resistance thermometer: (+/-1% PV or +/-2°C, whichever is greater) +/- 1 digit or less Thermistor: (+/-2%FS) +/-1 digit or less
Effect of voltage
Effect of electromagnetic interference (according to EN61326-1)
Control sensitivity (When ON/OFF control)		0.2%FS (For thermocouple/platinum resistance thermometer multi-input type: 0.1%FS)
Proportional Band		1 to 999°C (automatically set by self-tuning or auto-tuning)
Integration Time		1–1999 s (Automatically set by self-tuning or auto-tuning)
Derivative Time		1–1999 s (Automatically set by self-tuning or auto-tuning)
Alarm Output Setting Range		Absolute value alarm: Same as control setting range Others: 0 to input setting range full scale [Unit: °C or°F] Alarm hysteresis: 0.2°C or°F (fixing)
Control Cycle		2/20 s
Sampling period		500 ms
Insulation resistance		20 MΩ or more (500 V DC insulation resistance tester)
Withstand voltage		2,000 V AC 50/60 Hz for 1 min (between terminals of different live parts)
Vibration resistance	Malfunction	10 to 55 Hz, 20 m/s2, 10 min in each direction of X, Y, and Z
	Endurance	10 to 55 Hz, 0.75 mm in each direction of X, Y, and Z for 2 hr
Impact resistant	Malfunction	100 m/s2 6 directions, 3 times each
	Endurance	300 m/s2 6 directions, 3 times each
Lifespan	Electrical	Over 100,000 times (relay output type)
Weight		approx. 110 g (main body only)
Protective Structure		Front: IP50, enclosure category 2 (according to IEC60529), rear case: IP20, terminal: IP00
Memory Protection		Non-volatile memory (write cycles: 1,000,000 times)
EMC		Radiated emission field strength EN55011 Group 1 Class A Terminal noise voltage EN55011 Group 1 Class A ESD immunity EN61000-4-2 : 4 kV contact electric discharge (Level 2)                                   8 kV air electric discharge (Level 3) Electric field strength immunity EN61000-4-3 : 10 V/m (80–1,000 MHz, 1.4–2.0 GHz amplitude modulation) (Level 3) 10 V/m (900 MHz pulse modulation) Conducted Disturbance Immunity EN61000-4-6 : 3 V (0.15–80 MHz) (Level 2) Fast Transient EN61000-4-4 Burst Noise Immunity: 2 kV Power Line (Level 3)                                      1 kV Input/Output Signal Line (Level 3) Surge Immunity EN61000-4-5 : Power line Normal mode 1 kV Common mode 2 kV Output line (relay output)                             Normal mode 1 kV Common mode 2 kV Voltage dip/interruption immunity EN61000-4-11 : 0.5 cycle, 100% (rated voltage)
Certification Standards		UL61010-1 (Listing supported) CSA C22.2 No.1010-1
Applicable standards		EN61326-1, EN61010-1, IEC61010-1

*1. In the case of thermocouples, the following exceptions apply.
      ·For U and L, within +/-2°C +/-1 digit.
      ·R of 200°C or less: +/-3°C +/-1 digit or less.
*2. In the case of platinum resistance temperature detectors, the following exceptions apply.
      ·For model E5CS-U, input setting value 1: 1%FS +/-1 digit or less.
*3. In the case of thermistors, the following exceptions apply.
      ·When using the°C unit setting, temperature indication ranges that exceed the set temperature range +/-10%FS are not covered by the accuracy guarantee.
      ·When using the°F unit setting, temperature indication ranges of 609 to 630°F for input setting numbers 4 and 9, as well as ranges that exceed -5%FS to +10%FS of the set temperature range, are not covered by the accuracy guarantee.