Small Solenoid Lock / Safety Door Switch [D4SL-N]
Caution
Product Description
General-purpose enclosed switch with high shut-off capacity and high durability
[Features]
· ZE, ZV, and ZV2 types have built-in Z type general-purpose basic switch.
· Highly durable and has a large shutoff capacity.
· There are three types of mounting methods: side, bottom and side diagonal, as well as abundant actuator types.
· Connecting is easy since the terminal of the built-in switch is on the front when the cover is removed.
· Models with ground terminals support CE Marking.
· UL/CSA/CCC certified (contact the manufacturer for the certification format).
Drawing
Model D4SL-N****-*N (connector type)
*If you insert a pin or similar protruding shape into the ⌀4.5 hole for fixing, you can mount it more securely.
Model D4SL-N****-* (Terminal Block Type)
*If you insert a pin or similar protruding shape into the ⌀4.5 hole for fixing, you can mount it more securely.
Product Specification
Performance
| Interlock type | Type 2 (EN ISO 14119) | |
|---|---|---|
| Encoding level | Low level coded (EN ISO 14119) | |
| Protective structure | IP67 *1 TYPE 4X Indoor use only (UL, CSA) | |
| Durability*2 | Mechanical | More than 1 million times |
| Electrical | More than 150,000 times (at 125 V AC 1 A resistive load) *3 | |
| Allowable operation speed | 0.05 to 1 m/s | |
| Allowable operation frequency | 4, 5 contact type: 30 times/min 6 contact type: 5 times/min | |
| Direct opening force*4 | Minimum 60 N (EN60947-5-1) | |
| Direct opening stroke*4 | Minimum 15 mm (EN60947-5-1) | |
| Lock strength (Fzh) *5 | Minimum {1300} N | |
| Contact resistance | 200 mΩ or less | |
| Minimum applicable load*6 | 5 V DC 1 mA resistive load (N-level reference value) | |
| Rated insulation voltage (Ui) | 150 V (EN60947-5-1) | |
| Rated frequency | 50/60 Hz | |
| Appliance Class | Class II (double insulation) | |
| Pollution degree (operating environment) | Pollution degree 3 (EN60947-5-1) | |
| Impulse Withstand voltage (Uimp) (EN60947-5-1) | Between terminals of the same polarity | 1.5 kV |
| Between different pole terminals | 1.5 kV | |
| Between each terminal and non-current-carrying metal part | 2.5 kV | |
| Insulation resistance | 100 MΩ or more (500 V DC insulation resistance tester) | |
| Vibration | Malfunction | 10 to 55 Hz half amplitude 0.35 mm |
| Impact | Malfunction | 80 m/s2 or more |
| Endurance | 1000 m/s2 or more | |
| Conditional short circuit current | 100 A (EN60947-5-1) | |
| Rated contact current (Ith) | 2.5 A (11-42, 21-52, 21-22) 1 A (others) | |
| Operating ambient temperature | -10 to 55℃ (no freezing) | |
| Operating Ambient Humidity | 95% RH or less | |
| Weight | Resin head Approx. 290 g (connector type) Approx. 330 g (terminal block type) Metal head Approx. 370 g (connector type) Approx. 410 g (terminal block type) | |
*1. The values given above are initial values.
2. The switch contacts can be used for both general and micro loads; however, once a contact has switched a load, it cannot be used with a load of smaller capacity.
The contact surface may become rough, which could compromise contact reliability.
*1. This protective structure is based on test methods according to the standard (EN60947-5-1). Please confirm the sealing performance in advance under the actual operating environment and usage conditions.
The switch box body is protected against the ingress of dust and water; however, please use it in a location where chips, oil, water, or chemicals will not come into contact with the operation key insertion opening of the head section.
Otherwise, it may cause early wear, damage, or malfunction.
*2. The durability conditions are based on an ambient temperature of 5 to 35°C and an ambient humidity of 40 to 70% RH. For other detailed conditions, please contact the manufacturer.
*3. Do not apply 125 V AC 1 A to more than three circuits.
*4. Be sure to secure it to ensure safe use.
*5. Based on the evaluation method of ISO 14119.
*6. This value may vary depending on switching frequency, environmental conditions, and reliability level. Please check with the actual load in advance.
Structure
*If you insert a pin or similar protruding shape into the ⌀4.5 hole for fixing, you can mount it more securely.
Specifications Table
Model D4SL-N****-*N (connector type)
Model D4SL-N****-* (Terminal Block Type)
| Operating Characteristics | Model D4SL-N***-***N |
|---|---|
| Operation Key Insertion Force Operation Key Withdrawal Force | Max 15N Max 30N |
| Movement Until Operation | Max 15mm |
| Movement Until Mechanical Lock | Min 3mm |
| Operating Characteristics | Model D4SL-N****-* |
|---|---|
| Operation Key Insertion Force Operation Key Withdrawal Force | Max 15N Max 30N |
| Movement Until Operation | Max 15mm |
| Movement Until Mechanical Lock | Min 3mm |