RD-47N Pressure-Reducing Valve for Door-to-Door Water Supply (for Cold/Hot Water), Benkei

RD-47N Pressure-Reducing Valve for Door-to-Door Water Supply (for Cold/Hot Water), Benkei

Pressure reducing valve for hot and cold water supply used in apartment buildings, high-rise buildings, etc.

[Features]
· Water supply pressure reducing valve per room unit results in: 1) Reduces flow noise. 2) Eliminates water supply pressure variation difference with elevation difference. 3) No water splashes due to application of appropriate pressure. 4) During maintenance, impact of water outage does not affect wide area. 5. Stable mixing temperature resulting in improved habitability.
· Uses chlorine water-resistant EPDM.
· Sanitary design avoids pooling of liquids.
· Works reliably from low differential pressures to high differential pressure.
· Easy, simple new test gag method.
· Safe and secure construction is made possible due to intact pressure-reducing valves.
· You can conduct a hydraulic test even after construction while the pressure reducing valve is installed.
▪ Cassette type valve enables easy maintenance.
· With a structure without caulking or welding, all components are recyclable and can be segregated and disposed.

PDF

Japanese Only

Part Number

Configured Part Number is shown.

 
Part Number
RD47N-FHPL3-25A
RD47N-FHPL6-25A
RD47N-FLPL1-25A
Part NumberVolume DiscountDays to ShipAdjusting Pressure Range in the Secondary Side
(MPa)
Setting Pressure in the Secondary Side
(MPa)
45 Day(s) or more 0.12~0.350.25
10 Day(s) or more 0.12~0.350.20
10 Day(s) or more 0.05~0.130.08

Loading...

  1. 1

Basic Information

Regulating Valve / Safety Valve Type Pressure Reducing Valve Applicable Fluid Water Pressure Relief Valve Shape Linear Motion Type Diaphragm
Maximum Applicable Pressure Classification(MPa) 0.11~1 Fluid temperature(℃) 5~90 Body Material CAC406
Connection Type Equal Dia. Connection End Connection, Inlet Screw Connection Types JIS, R Thread End Connection, Nominal Diameter of Inlet Piping Screw 1B(25A)
End Connection, Outlet Screw Connection Types JIS, R Thread End Connection, Nominal Diameter of Outlet Piping Screw 1B(25A) Primary Side Applicable Pressure(MPa) 1.0 or Less
Connection Type (Inlet x Outlet) R Thread (Mail Union Fitting)

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
TEL:124- 468-8841 / FAX:124-468-8811
9:00am - 5:30pm (Monday -Saturday)