Configure

Part number has not been determine

(10 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

FS-2006

Flare-Model Joint Double-Opening Flare Joint FS

Name: Flare-Model Joint Double-Opening Flare Joint FS
Brand: ASOH
Price: From 311.09 INR

Check FAQ of this product (1 items)

Brand :

Select part number to Order Now/ Add to Cart

A flare joint for connecting copper pipes together.

Price	Minimum Order Qty.	Days to Ship	Applicable Tube Size Type	Nominal 1 (mm)	Nominal 1 (inch)	Applicable Pipe O.D. 1 (mm)
₹ 311.09	1 Piece(s)	5 Day(s) or more	Copper Pipe mm size	6	-	6
₹ 311.09	1 Piece(s)	5 Day(s) or more	Copper Pipe mm size	8	-	8
₹ 388.78	1 Piece(s)	5 Day(s) or more	Copper Pipe mm size	10	-	10
₹ 564.24	1 Piece(s)	8 Day(s) or more	Copper Pipe mm size	12	-	12
₹ 1,237.95	1 Piece(s)	8 Day(s) or more	Copper Pipe mm size	15	-	15
₹ 311.09	1 Piece(s)	5 Day(s) or more	Copper Pipe inch size	-	1/4	6.35
₹ 388.78	1 Piece(s)	5 Day(s) or more	Copper Pipe inch size	-	3/8	9.52
₹ 576.29	1 Piece(s)	5 Day(s) or more	Copper Pipe inch size	-	1/2	12.70
₹ 1,237.95	1 Piece(s)	8 Day(s) or more	Copper Pipe inch size	-	5/8	15.88
₹ 1,596.91	1 Piece(s)	8 Day(s) or more	Copper Pipe inch size	-	3/4	19.05

Type	Fitting	Material	C3604BD	Applicable Pipe Type	Copper Pipe (Annealed Copper Pipe)
Applicable Fluid	Water / Air / Oil	Connection Type	Pipe⇔Pipe, same diameters, plug-in type	Connection Shape	Straight Pipe⇔Screw(Union/Socket/Reducer.etc)
Fitting type	Flare Fittings	Material of Applicable Pipe	Copper	Max. Operating Pressure(MPa)	3.45
Surface Treatment	No	Operating Temperature Range(°C)	-50::150	Divisions of Max. Operating Pressure(MPa)	than 2.0Mpa

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Question: What is the difference between the ring type and flare type?: Answer: Ring joints: Directly inserted into cut copper pipes and connected by tightening nuts. However, the pipe cut surface must be free of burrs.
Flare joints: After inserting the cut copper pipe into the nut, it is fastened to the main body with a joint expanded by a flaring tool, etc., at 45° into a flare (bell) shape.