MiSUMi
Loading...

Actuator used for micro switch plate VAL

Brand :
OMRON

Caution

    Product Description

    Pin push button type and exclusively for the models with OF1/96N or more.

    [Features]
    · Actuators are supplementary components used when operating the switch using cams or dogs or when transmitting mechanical movements that are not in alignment with the push button of switch.
    · The VAL series are suitable for cases where a switch is operated by a rotary cam or sliding devices with relatively low operation frequency.

    Dimensional Drawing of OMRON Peripheral Components

    * The Peripheral Components Model numbers are for the Actuators only.

    The value given for operating characteristics are reference values. For operating characteristics of models not listed above, consult your OMRON sales representative.

    Leaf Spring Model of Peripheral Components

    VAL

    Leaf Spring Model
    Operating characteristicsIn the case of V-15-1A5
    Operating Force   OF Max.
    Releasing Force   RF Min.    		2.26 N {230 gf}
    0.49 N {50 gf}
    Overtravel   OT Min.
    Movement Differential   MD Max.    		0.8 mm
    0.4 mm
    Free Position   FP Max.
    Operating Position   OP    		17 mm
    17.9 mm ± 0.5 mm

    Note. Pin plunger (Designed for models of OF 1.96 N {200 gf} or greater).

    Simulated Leaf Spring of Peripheral Components

    VAL 12

    Simulated Leaf Spring
    Operating characteristicsIn the case of V-15-1A5
    Operating Force   OF Max.
    Releasing Force   RF Min.    		2.26 N {230 gf}
    0.49 N {50 gf}
    Overtravel   OT Min.
    Movement Differential   MD Max.    		0.8 mm
    0.4 mm
    Free Position   FP Max.
    Operating Position   OP    		22.9 mm
    20.5 mm ± 0.8 mm

    Note. Pin plunger (Designed for models of OF 1.96 N {200 gf} or greater).

    Roller Leaf Spring of Peripheral Components

    VAL 2
    VAL 02

    Roller Leaf Spring
    Operating characteristicsIn the case of V-15-1A5
    Operating Force   OF Max.
    Releasing Force   RF Min.    		2.26 N {230 gf}
    0.49 N {50 gf}
    Overtravel   OT Min.
    Movement Differential   MD Max.    		0.8 mm
    0.4 mm
    Free Position   FP Max.
    Operating Position   OP    		22.6 mm
    20.5 mm ± 0.5 mm

    Note. Pin plunger (Designed for models of OF 1.96 N {200 gf} or greater).

    Note 1. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions of Peripheral Components.
    Note 2. The operating characteristics are for operation in the A direction.