for Sputtering Resistance, Tube Fitting Brass Elbow, Coverless

for Sputtering Resistance, Tube Fitting Brass Elbow, Coverless

The main body and release ring are made of brass for superior flame retardancy and sputtering resistance.

Part Number

Configured Part Number is shown.

Specifications Of Tube Fitting Brass - Elbow - Without Cover

Spatter-resistant Tube Fitting Brass - Elbow (without cover): related image

Appearance of Tube Fitting Brass - Elbow - without cover

Spatter-resistant Tube Fitting Brass - Elbow (without cover): related image

Dimensional drawing of Tube Fitting Brass - Elbow - without cover
(metric thread)

Spatter-resistant Tube Fitting Brass - Elbow (without cover): related image

Dimensional drawing of Tube Fitting Brass - Elbow - without cover
(for taper pipe thread)

Usable fluids: air, water (see condition *1), heat transfer oil (see condition *2)
Maximum operating pressure: 1.0 MPa
Operating vacuum pressure: -100 kPa
Operating temperature range: HNBR specification: 0 to 100°C, FKM specification: 0 to 120°C (no freezing)

  • *1 When using water or heat transfer oil, make sure the surge pressure stays below the maximum operating pressure.
  • *2 Be sure to use an insert ring when using this product for water or heat transfer oil.

Size Chart

FormatTube Outer Diameter
φD
RABLφPTube End
C
EHex
H
Orifice Diameter
(φmm)
Mass
(g)
KL4-M5-1□4M5 × 0.8319.822.110.514.517.6101.817
KL4-01-1□R1/8822.824.12.520
KL4-02-1□R1/41125.8251429
KL6-M5-1□6M5 × 0.832225.312.516.620.2121.824
KL6-01-1□R1/882527.3427
KL6-02-1□R1/4112828.21435
KL6-03-1□R3/81229.829.71747
KL8-01-1□8R1/882831.314.517.722.314634
KL8-02-1□R1/4113132.240
KL8-03-1□R3/81232.833.71753
KL10-01-1□10R1/8832.537.818.52026.117662
KL10-02-1□R1/41135.538.7864
KL10-03-1□R3/81236.539.473
KL10-04-1□R1/21539.540.62299
KL12-02-1□12R1/41137.542.221.522.629.7218100
KL12-03-1□R3/81238.542.99106
KL12-04-1□R1/21541.544.122121

Units: mm

  • *1 Taper thread type L dimensions are reference dimensions after tightening with screws.
  • *2 For the □ at the end of the order format, input -F if you want the FKM sealing rubber material.

Applicable Tube Size

Millimeter size (mm): φ4 (diameter 4 mm), φ6 (diameter 6 mm)φ8 (diameter 8 mm), φ10 (diameter 10 mm), φ12 (diameter 12 mm)

Compatible Thread Sizes

Metric ThreadM5 × 0.8
Taper Pipe ThreadR1/8, R1/4, R3/8, R1/2

Precautions

Warning
This product is not intended for use outside the product uses specified for the series. Please inquire concerning use of this product outside of the specified uses.

Caution
1. Tighten the bulkhead nut of the Bulkhead Union (PM), Bulkhead Union P (PMP) and Bulkhead Union Elbow (PML) range within the specified tightening torque.

Bulkhead nut torque values

Product NameSize Of FittingTightening Torque
Bulkhead Union (PM)Bulkhead Union P (PMP), Bulkhead Union Elbow (PML)
Tube Fitting412.0 to 14.0 N·m0.4 to 0.6 N·m
618.0 to 21.0 N·m0.9 to 1.1 N·m
818.0 to 21.0 N·m1.1 to 1.3 N·m
1019.0 to 21.0 N·m2.3 to 2.7 N·m
1219.0 to 21.0 N·m2.7 to 3.3 N·m
1642.0 to 54.0 N·m-

2. When tightening the bulkhead nut, there is a risk of deforming the tightened body. In addition, if oil adheres to the surface, the secured bulkhead part may loosen.

3. Pneumatic pipe fittings are intended to be used with the tube attached. Therefore, if air is applied with no tube attached, for example for flushing, the elastic sleeve may come off the product.

See the manufacturer's catalog for other precautions and important notes.

Part Number
KL4-01-1
KL4-01-1-F
KL4-02-1
KL4-02-1-F
KL4-M5-1
KL4-M5-1-F
KL6-01-1
KL6-01-1-F
KL6-02-1
KL6-02-1-F
KL6-03-1
KL6-03-1-F
KL6-M5-1
KL6-M5-1-F
KL8-01-1
KL8-01-1-F
KL8-02-1
KL8-02-1-F
KL8-03-1
KL8-03-1-F
KL10-01-1
KL10-01-1-F
KL10-02-1
KL10-02-1-F
KL10-03-1
KL10-03-1-F
KL10-04-1
KL10-04-1-F
KL12-02-1
KL12-02-1-F
KL12-03-1
KL12-03-1-F
KL12-04-1
KL12-04-1-F
Part NumberVolume DiscountDays to ShipRoHSSeal Material Operating Temperature
(°C)
Applicable Tube O.D.1
(φ)
Types of connection screw 1 Nominal of Thread 1
5 Day(s) or more 6[H-NBR] HNBR0~1004R1/8
12 Day(s) or more 6[Fluororubber] FKM0~1204R1/8
12 Day(s) or more 6[H-NBR] HNBR0~1004R1/4
12 Day(s) or more 6[Fluororubber] FKM0~1204R1/4
12 Day(s) or more 6[H-NBR] HNBR0~1004MM5×0.8
12 Day(s) or more 6[Fluororubber] FKM0~1204MM5×0.8
5 Day(s) or more 6[H-NBR] HNBR0~1006R1/8
5 Day(s) or more 6[Fluororubber] FKM0~1206R1/8
10 Day(s) or more 6[H-NBR] HNBR0~1006R1/4
10 Day(s) or more 6[Fluororubber] FKM0~1206R1/4
12 Day(s) or more 6[H-NBR] HNBR0~1006R3/8
12 Day(s) or more 6[Fluororubber] FKM0~1206R3/8
12 Day(s) or more 6[H-NBR] HNBR0~1006MM5×0.8
12 Day(s) or more 6[Fluororubber] FKM0~1206MM5×0.8
5 Day(s) or more 6[H-NBR] HNBR0~1008R1/8
5 Day(s) or more 6[Fluororubber] FKM0~1208R1/8
5 Day(s) or more 6[H-NBR] HNBR0~1008R1/4
5 Day(s) or more 6[Fluororubber] FKM0~1208R1/4
12 Day(s) or more 6[H-NBR] HNBR0~1008R3/8
12 Day(s) or more 6[Fluororubber] FKM0~1208R3/8
5 Day(s) or more 6[H-NBR] HNBR0~10010R1/8
12 Day(s) or more 6[Fluororubber] FKM0~12010R1/8
5 Day(s) or more 6[H-NBR] HNBR0~10010R1/4
5 Day(s) or more 6[Fluororubber] FKM0~12010R1/4
5 Day(s) or more 6[H-NBR] HNBR0~10010R3/8
5 Day(s) or more 6[Fluororubber] FKM0~12010R3/8
12 Day(s) or more 6[H-NBR] HNBR0~10010R1/2
12 Day(s) or more 6[Fluororubber] FKM0~12010R1/2
5 Day(s) or more 6[H-NBR] HNBR0~10012R1/4
5 Day(s) or more 6[Fluororubber] FKM0~12012R1/4
5 Day(s) or more 6[H-NBR] HNBR0~10012R3/8
5 Day(s) or more 6[Fluororubber] FKM0~12012R3/8
10 Day(s) or more 6[H-NBR] HNBR0~10012R1/2
12 Day(s) or more 6[Fluororubber] FKM0~12012R1/2

Loading...

  1. 1

Basic Information

Types One-Touch Couplings Fitting Type Screw Mount Direction Applicable Fluid Water / Air
Body Material Brass Application Static electricity dissipation and anti-static properties / Sputtering Resistance / Heat Resistant Screw Mounting, Direction Elbow
Elbows Male Elbows

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
TEL:124- 468-8841 / FAX:124-468-8811
9:00am - 5:30pm (Monday -Saturday)