Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 6:30 24/11/2024 to 4:30 (IST) 25/11/2024. We apologize for the inconvenience.
Please note that the MISUMI Pune office and warehouse will be closed on November 20th due to the state election.
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(1 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

F-FS-UCFM210D1/L791

type Shaft Bore Dia. d Cover Type Lubrication method Heat Resistant Characteristics Lubrication Basic Dynamic Load Rating Cr CAD Days to Ship

Specification/Dimensions

type
- F-FS-UCFM
- F-UCFM
Clear
Shaft Bore Dia. d(Ø)
20

25

30

35

40

45

50
Clear
Cover Type
- N/A
- Stainless steel plate cover with rubber seal
Clear
Lubrication method
- Oil-Free Type
- Oil Supply Type
Clear
Heat Resistant Characteristics
- Standard
Clear
Lubrication
- LP03
- L791
Clear
Basic Dynamic Load Rating Cr(N)
9900

10800

15000

19700

22400

25200

27000
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

5 Day(s) or Less

8 Day(s) or Less

9 Day(s) or Less
Clear

Specify Alterations

Stainless Steel Diamond-Shaped Flange (F-FS-UCFM210D1/L791)

Brand :

NTN

Order Qty :
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

Product Description

[Features]Stainless steel diamond flange bearing unit. Selectable from lubrication and lubrication-free types.

Drawing

F-UCFM2 type, cylindrical bore, set screw type

With a stainless steel plate cover with a rubber seal

With a stainless steel plate closing cover

Product features details

Structure

Refueling type bearing unit

Lubrication-free bearing unit

Bearing shaft fixing method

General conditions of use
Set screw system

Features and benefits

Lubrication-free type

The bearing unit is filled with an appropriate amount of ideal lithium soap-based grease that is ideal for sealed bearings and can withstand long-term use. Since it is equipped with a unique and excellent sealing device, there is almost no leakage of grease or intrusion of dust and moisture from the outside under general usage conditions. In addition, the sealed grease circulates inside as the bearing rotates, and is designed so that it can fully fulfill its lubrication purpose.

Lubrication type

Compared to other companies' systems, this design allows fueling even when the bearing is aligned to 2°(1° for narrow outer ring bearings) for the left or right. A grease fitting hole has been made in the bearing housing, which would normally reduce the strength of the bearing significantly, but after experiments, the housing was set to the location with the least impact. The oil supply groove is also designed with sufficient consideration to prevent deterioration of housing strength and grease hardening. The lubrication-free bearing unit is sufficient for indoor use under general usage conditions.

Excellent sealing device

The ball bearing sealing device for standard bearing units is a combination of a heat-resistant and oil-resistant synthetic rubber seal and a slinger with a unique design.

The bearing unit with cover has a dust-proof cover attached to the outside of the standard type bearing unit, and the bearing unit is designed with special consideration for dust-proof effect so that it can withstand the environmental conditions of various industrial machines such as heavy dust and watery milling, steel making, casting machine, plating, chemical factory or construction machinery used outdoors and transportation machinery by the sealing mechanism of both the bearing and the housing.

Secure mounting

To fix the shaft and bearing, if you tighten the unique ball-filled set screw provided on the inner ring, the set screw will not loosen easily even if it receives vibration or impact due to its excellent thread-locker effect.

Alignment

The outer diameter surface of the ball bearing for the unit used for the bearing unit and the inner diameter surface of the housing to which it is fitted are finished to be spherical so that they can be aligned by proper fitting. Therefore, it is possible to adjust the deviation of the shaft center caused by the shaft work defect, mounting error, etc.

Large rated load

The bearing used for the bearing unit has the same internal structure as the bearing series 62 and 63, and can receive not only radial load but also axial load or a combined load thereof. The rated load of this bearing is considerably larger than that of the self-aligning ball bearing used in the equivalent standard type plummer block.

Light and strong housing

Housings used for bearing units come in a variety of shapes and materials. Both are reasonably designed to be lightweight and maintain maximum strength.

Easy installation

The bearing unit is a combination of a bearing and a housing. In addition, since the bearing is pre-filled with an appropriate amount of lithium soap-based grease, it can be easily attached to the shaft as it is. It can be used immediately after a simple operation inspection after installation.

Housing fixation

When installing the pillow block unit or flange mount unit, a dowel seat is provided on the mounting surface of the housing in order to increase the degree of fixation, so it can be used as needed.

Bearing compatibility

The bearing unit is compatible between the bearing and the housing, and if the bearing becomes unusable due to heat generation, abnormal noise, etc., the housing can be reused simply by replacing the bearing.

: 30; 45; 60

Part Number
F-FS-UCFM210D1/L791

Part Number	Price	Minimum Order Qty.	Volume Discount	Days to Ship	RoHS	Shaft Bore Dia. d (Ø)	Basic Load Rating: Dynamic Load (N)	Basic Load Rating: Static Load (N)	Cover Type	Lubrication method	Heat Resistant Characteristics	Lubrication	Basic Dynamic Load Rating Cr (N)
	₹ 23,704.95	1 Piece(s)		8 Day(s) or more	10	50	-	23200	Stainless steel plate cover with rubber seal	Oil Supply Type	Standard	L791	27000

Product TOP

Basic Information

Unit, Type	Bearing unit	Bearing Unit, Type	Diamond Flange Shape	Unit Body Material	Stainless Steel
Bearing Inner Dia. Shape	Cylindrical Bore Set Screw	Rolling Element Material	Stainless Steel	Surface Treatment	No
Seal	Standard nitrile rubber seal	Temperature Properties	Standard	Set Screws	Set Screw (no ball)

Please check the type/dimensions/specifications of the part F-FS-UCFM210D1/L791 in the Stainless Steel Diamond-Shaped Flange series.

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Product variants

Part Number
F-FS-UCFM204D1/L791
F-FS-UCFM205D1/L791
F-FS-UCFM207D1/L791
F-UCFM204/LP03
F-UCFM204D1/L791
F-UCFM205/LP03

Standard Unit Price	Minimum order quantity	Days to Ship	RoHS	Shaft Bore Dia. d (Ø)	Basic Load Rating: Dynamic Load (N)	Basic Load Rating: Static Load (N)	Cover Type	Lubrication method	Heat Resistant Characteristics	Lubrication	Basic Dynamic Load Rating Cr (N)
₹ 9,136.36	1 Piece(s)	8 Day(s) or more	10	20	-	6650	Stainless steel plate cover with rubber seal	Oil Supply Type	Standard	L791	9900
₹ 8,887.24	1 Piece(s)	8 Day(s) or more	10	25	-	7850	Stainless steel plate cover with rubber seal	Oil Supply Type	Standard	L791	10800
₹ 15,889.58	1 Piece(s)	8 Day(s) or more	10	35	-	15300	Stainless steel plate cover with rubber seal	Oil Supply Type	Standard	L791	19700
₹ 8,127.04	1 Piece(s)	5 Day(s) or more	-	20	9900	6650	N/A	Oil-Free Type	-	LP03	9900
₹ 7,597.40	1 Piece(s)	8 Day(s) or more	10	20	-	6650	N/A	Oil Supply Type	Standard	L791	9900
₹ 8,952.85	1 Piece(s)	5 Day(s) or more	10	25	10800	7850	N/A	Oil-Free Type	-	LP03	10800

Search by Category / Brand

Search by Category

How can we improve?