Brass Tightening Fitting - Straight - for Sputtering Resistance
Caution
Product Description
Special brass is used for metal body to greatly improve corrosion resistance to water.
[Features]
· Special brass is used for metal body.
· Corrosion resistance to water has been greatly increased.
· Ideal for use in the automobile industry and for mold temperature control.
· Never worry about forgetting or losing the sleeve again with this no-sleeve design.
· A wide variety is available to support a wide range of applications.
· 5 shapes: Types C, CF, MF, L and E. Adjustable tube: 10 types are available from φ4 to φ16mm.
Specifications Of All Brass Compression Fitting - Straight
Appearance of All Brass Compression Fitting - Straight
Dimensional drawing of All Brass Compression Fitting - Straight
Usable fluids: air, water, other*
Maximum operating pressure: depends on the maximum operating pressure of the tube
Operating vacuum pressure: -100 kPa
Operating temperature range: depends on the specification range of the tube (no freezing)
- *For fluids other than air and water, compliance with the specifications may vary depending on usage conditions, so please check before using.
- *When using water or other liquids, make sure the surge pressure stays below the maximum operating pressure.
- *The operating temperature range depends on the operating temperature of the tube that is used, but when used at high temperature, there is a risk of damage if an excessive load is applied to the main body.
Compatible Sizes
| Millimeter Size (mm) | ø4 × ø2.5, ø6 × ø4, ø8 × ø5, ø8 × ø6, ø10 × ø6.5, ø10 × ø7.5, ø12 × ø8, ø12 × ø9, ø16 × ø11, ø16 × ø13 |
|---|
Tube size (outer diameter × internal diameter)
Thread size
Taper pipe male thread: R1/8, R1/4, R3/8, R1/2
Taper pipe female thread: Rc1/8, Rc1/4, Rc3/8, Rc1/2
| Format | Tube Outer Diameter × Internal Diameter øD | R | A | B | L | E | C | Opposite Side H1 | Opposite Side H2 | Effective Cross-Sectional Area (mm2) | Mass (g) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| NKC0425-01 | 4 × 2.5 | R1/8 | 8 | 21.5 | 17.5 | 10.5 | 5.5 | 8 | 10 | 1 | 8.1 |
| NKC0425-02 | R1/4 | 11 | 25.5 | 19.5 | 14 | 14 | |||||
| NKC0640-01 | 6 × 4 | R1/8 | 8 | 22 | 18 | 11 | 6 | 10 | 10 | 5.5 | 9.7 |
| NKC0640-02 | R1/4 | 11 | 26 | 20 | 14 | 16 | |||||
| NKC0640-03 | R3/8 | 12 | 28 | 21.7 | 17 | 25 | |||||
| NKC0850-01 | 8 × 5 | R1/8 | 8 | 24 | 20 | 12 | 7 | 12 | 12 | 10 | 14 |
| NKC0850-02 | R1/4 | 11 | 27 | 21 | 14 | 18 | |||||
| NKC0850-03 | R3/8 | 12 | 29 | 22.7 | 17 | 27 | |||||
| NKC0860-01 | 8 × 6 | R1/8 | 8 | 24 | 20 | 12 | 7 | 12 | 12 | 15 | 14 |
| NKC0860-02 | R1/4 | 11 | 27 | 21 | 14 | 18 | |||||
| NKC0860-03 | R3/8 | 12 | 29 | 22.7 | 17 | 27 | |||||
| NKC1065-02 | 10 × 6.5 | R1/4 | 11 | 29.8 | 23.8 | 14.8 | 9 | 16 | 16 | 15 | 29 |
| NKC1065-03 | R3/8 | 12 | 31.8 | 25.5 | 17 | 36 | |||||
| NKC1065-04 | R1/2 | 15 | 35.8 | 27.6 | 21 | 57 | |||||
| NKC1075-02 | 10 × 7.5 | R1/4 | 11 | 29.8 | 23.8 | 14.8 | 9 | 16 | 16 | 21 | 29 |
| NKC1075-03 | R3/8 | 12 | 31.8 | 25.5 | 17 | 36 | |||||
| NKC1075-04 | R1/2 | 15 | 35.8 | 27.6 | 21 | 56 | |||||
| NKC1280-02 | 12 × 8 | R1/4 | 11 | 30.4 | 24.4 | 15.4 | 9 | 17 | 17 | 26 | 30 |
| NKC1280-03 | R3/8 | 12 | 32.4 | 26.1 | 37 | ||||||
| NKC1280-04 | R1/2 | 15 | 36.4 | 28.2 | 21 | 56 | |||||
| NKC1290-02 | 12 × 9 | R1/4 | 11 | 30.4 | 24.4 | 15.4 | 9 | 17 | 17 | 35 | 30 |
| NKC1290-03 | R3/8 | 12 | 32.4 | 26.1 | 36 | ||||||
| NKC1290-04 | R1/2 | 15 | 36.4 | 28.2 | 21 | 56 | |||||
| NKC1611-03 | 16 × 11 | R3/8 | 12 | 35.2 | 28.9 | 16.2 | 9.5 | 23 | 23 | 50 | 68 |
| NKC1611-04 | R1/2 | 15 | 38.2 | 30 | 77 | ||||||
| NKC1613-03 | 16 × 13 | R3/8 | 12 | 35.2 | 28.9 | 16.2 | 9.5 | 23 | 23 | 70 | 67 |
| NKC1613-04 | R1/2 | 15 | 38.2 | 30 | 76 |
Units: mm
- *L dimensions are reference dimensions after tightening with screws.