• Due to the typhoon(Hagibis) in Japan, delivery of some products may be delayed. We apologize for any inconvenience and thank you for your understanding

Stand for optical bench

Stand for optical bench

· A stand which when placed under an optical bench can hold the bench horizontally using adjustment screws.
· The A11-4N/5N is placed on both sides of the bench. The A11-6N is used by placing in the middle when the bench is long.
· When installing the A10 optical bench, the A11-3 is always required.
· Optical benches A16 and 18 can be fixed directly from the top surface using M6 bolts/screws.
· For loads applied onto the optical bench carrier, as a general rule, avoid unbalanced or concentrated loads and ensure that it is equal to or greater than 20 times the weight of the carrier itself.


Japanese Only

Part Number

Configured Part Number is shown.

Part Number
Part NumberVolume DiscountDays to ShipRoHSSize
Number of adjusting screws
11 Day(s) or more 10120×951
11 Day(s) or more 10120×952
11 Day(s) or more 10240×602


  1. 1

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
TEL:124- 468-8841 / FAX:124-468-8811
9:00am - 5:30pm (Monday -Saturday)