Finishing Ball Cutter, End Mill Model
Brand :
MISUMI
Caution
Product Description
[Features]
·Tip exchange type ball cutter end mill type holder for finish
·Shank material can be selected from steel and carbide according to application
·Outer diameter: ⌀8 to ⌀32
·Number of Flutes: 2 flutes
·Compatible tip: NFBM-8 to 32
Specifications
| Model Number | Major Diameter D | Shank Diameter d | Overall Length L | Shank | d1 | L1 | L2 | α | Applicable Tips (>>P.765) | Accessory Screw Part Number (>>P.765) | Accessory Wrench Part Number (.>P.765) |
| MMFBM (steel shank) | 8 | 12 | 132 | Steel | 6.5 | 75 | 18.5 | 1°50 | NFBM-8 | MMNJ-6240 | MMTX-207 |
| 10 | 12 | 132 | 8 | 75 | 21 | 1°30 | NFBM-10 | MMNJ-3429 | MMTX-208 | ||
| 12 | 16 | 145 | 10 | 85 | 22 | 1°30 | NFBM-12 | MMNJ-3430 | MMTX-210 | ||
| 160 | 10 | 25 | 13 | 11°46 | |||||||
| 16 | 16 | 123 | 14 | 63 | — | — | NFBM-16 | MMNJ-3431 | MMTX-215 | ||
| 20 | 20 | 104 | 17 | 38 | — | — | NFBM-20 | MMNJ-3432 | MMTX-220 | ||
| 141 | 17 | 75 | — | — | |||||||
| 25 | 191 | 17 | 115 | 34 | 1°50 | ||||||
| 25 | 25 | 166 | 21 | 90 | — | — | NFBM-25 | MMNJ-3433 | MMTX-230 | ||
| 32 | 32 | 133 | 26 | 53 | — | — | NFBM-30 NFBM-32 | MMNJ-3434 | MMTX-240 | ||
| 240 | 26 | 160 | — | — | |||||||
| C-MMFBM (carbide shank) | 8 | 12 | 110 | Carbide | 6.5 | 53 | 19 | 4°10 | NFBM-8 | MMNJ-6240 | MMTX-207 |
| 10 | 12 | 92 | 8 | 35 | 22 | 7° | NFBM-10 | MMNJ-3429 | MMTX-208 | ||
| 110 | 8 | 53 | 22 | 3°30 | |||||||
| 132 | 8 | 75 | 22 | 2° | |||||||
| 12 | 12 | 110 | 10 | 53 | — | — | NFBM-12 | MMNJ-3430 | MMTX-210 | ||
| 16 | 145 | 10 | 85 | 22.5 | 1°20 | ||||||
| 16 | 16 | 123 | 14 | 63 | — | — | NFBM-16 | MMNJ-3431 | MMTX-215 | ||
| 20 | 20 | 141 | 17 | 75 | — | — | NFBM-20 | MMNJ-3432 | MMTX-220 |
| Model Number | Component Name |
| MMNJ-6240 | Screws |
| MMNJ-3429 | |
| MMNJ-3430 | |
| MMNJ-3431 | |
| MMNJ-3432 | |
| MMNJ-3433 | |
| MMNJ-3434 | |
| MMTX-207 | Wrench |
| MMTX-208 | |
| MMTX-210 | |
| MMTX-215 | |
| MMTX-220 | |
| MMTX-230 | |
| MMTX-240 |
Actual Cutting Diameter >>Click here.
More Information
● Recommended Cutting Conditions
● "D" in the table represents the outer diameter.
● Adjust the cutting speed and amount of feed appropriately according to the shape of the workpiece.
● The cutting speed are reference values for face milling when the work surface and end mill are installed perpendicularly (no Z axis feed).