Carbide Long Neck Square End Mill for Aluminum Machining, 2-Flute / Long Neck Model

Brand :

MISUMI

Caution

Product Description

DLC coated long neck square with both sharpness and durability

Carbide Long Neck Square End Mill for Aluminum Machining, 2-Flute / Long Neck Model:Related Image

Specifications

Carbide Long Neck Square End Mill for Aluminum Machining, 2-Flute / Long Neck Model:Related Image

Model Number
DLC-ALHEM2LB (Stocked Product)

Outer Diameter D	Length Under Neck ℓ1	Flute Length ℓ	Under Neck Diameter d1	Overall Length L	Shank Diameter d	Actual Effective Length Depends on Work Inclination Angle				Figure
Outer Diameter D	Length Under Neck ℓ1	Flute Length ℓ	Under Neck Diameter d1	Overall Length L	Shank Diameter d	30'	1°	2°	3°	Figure
0.5	4	1	0.46	50	4	4.16	4.33	4.72	5.19	1
0.5	8	1	0.46	50	4	8.32	8.66	9.46	10.52	1
1	6	2	0.95	50	4	6.24	6.49	7.1	7.89	1
	8					8.32	8.66	9.46	10.52
	12					12.48	12.99	14.2	15.78
1.5	8	3	1.45	50	4	8.32	8.66	9.46	10.52	1
	10					10.4	10.83	11.83	13.15
	12					12.48	12.99	14.2	15.78
	16					16.65	17.33	18.93	21.04
2	6	4	1.95	50	4	6.24	6.49	7.1	7.89	1
	8					8.32	8.66	9.46	10.52
	10					10.4	10.83	11.83	13.15
	12					12.48	12.99	14.2	15.78
	16					16.65	17.33	18.93	21.04
	20			70		20.81	21.66	23.67	26.3
	25					26.02	27.08	29.59	32.87
	30					31.22	32.49	35.51	39.45
2.5	8	5	2.4	50	4	8.32	8.66	9.46	10.52	1
	12					12.48	12.99	14.2	15.78
	16					16.65	17.33	18.93	21.04
3	12	6	2.9	70	6	12.48	12.99	14.2	15.78	1
	16					16.65	17.33	18.93	21.04
	20					20.81	21.66	23.67	26.3
	25					26.02	27.08	29.59	32.87
	30					31.22	32.49	35.51	39.45
4	16	8	3.8	70	6	16.65	17.33	18.93	21.04	1
	20					20.81	21.66	23.67	26.3
	30					31.22	32.49	Without Interference	Without Interference
	40			110		41.63	43.32	Without Interference	Without Interference
5	16	10	4.8	70	6	16.65	17.33	18.93	21.04	1
	20					20.81	21.66	23.67	26.3
	30					31.22	32.49	Without Interference	Without Interference
6	20	12	5.8	70	6	Without Interference	Without Interference	Without Interference	Without Interference	2
	30			70		Without Interference	Without Interference	Without Interference	Without Interference
	40			110		Without Interference	Without Interference	Without Interference	Without Interference

For Cutting Conditions, Refer to >>Click here.

Model Number
LN-DLC-ALHEM2S (Manufactured Product)

Outer Diameter D	Length Under Neck ℓ1 1 mm Increment Designation	Flute Length ℓ	Under Neck Diameter d1	Overall Length L	Shank Diameter d	Figure
1.5	8 ~ 20	3	1.45	40	4	3
2	9 ~ 21	4	1.95	40	4	3
2.5	10 ~ 22	5	2.4	40	4	3
3	11 ~ 26	6	2.9	50	6	3
4	13 ~ 28	8	3.8	50	6	3
5	15 ~ 35	10	4.8	55	6	3

[ ! ]When ordering manufactured products, be sure to confirm the ordering examples as the model numbers differ as below when ordering a stocked product.
(1) "LN-" is prepended to the start of the model number. (2) "S" is appended to the end of the model number

For Cutting Conditions, Refer to >>Click here.

More Information

Carbide Long Neck Square End Mill for Aluminum Machining, 2-Flute / Long Neck Model:Related Image