TS coated carbide roughing end mill, 45°spiral, fine pitch / long shank, regular model
Caution
Product Description
[Features]
·High-speed rotation processing is possible by adopting 45° helix angle
·Roughing end mill capable of coarse and middle to coarse machining with fine pitch nick
·Long shank type ideal for deep cavity milling
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
Specifications
| Model Number | Shank Diameter d | Flute Length ℓ | Overall Length L | Number of Flutes | Figure | ||
| Outer Diameter D | Shank Diameter d | ||||||
| TSC-LS-HRFPR | 6 | — | 6 | 15 | 100 | 3 | 1 |
| 8 | 6 | 6 | 20 | 100 | 4 | 2 | |
| 8 | — | 8 | 20 | 100 | 4 | 1 | |
| 10 | 8 | 8 | 25 | 100 | 4 | 2 | |
| 10 | — | 10 | 25 | 100 | 4 | 1 | |
| 12 | 10 | 10 | 30 | 120 | 4 | 2 | |
| 12 | — | 12 | 30 | 120 | 4 | 1 | |
| 14 | — | 12 | 35 | 120 | 4 | 2 | |
| 16 | — | 16 | 40 | 120 | 4 | 1 | |
| 18 | — | 16 | 45 | 125 | 4 | 2 | |
| 20 | — | 20 | 45 | 150 | 4 | 1 |
[ ! ]For shank diameter (d) specifications listed in blue, specify both a outer diameter (D) and shank diameter (d).
For Cutting Conditions, Refer to >>Click here.
More Information
● It has a new TS film coating with much greater oxidation resistance and hardness than conventional films, yielding a longer operational life and is ideal for high speed machining / dry machining.
● Adopts a 45° twisted structure that allows for high speed rotation.
● Adopts a fine pitch nick that delivers a finish with good surface roughness after machining.
● The long shank models are ideal for machining deep grooves.