(!)NOTE : Windows 7 users won’t be able to use some latest features of eCatalog/WOS since Microsoft is ending support for Windows 7 on 14 Jan, 2020. Please upgrade your system for uninterrupted services.
- Please note that the MISUMI Pune office and warehouse will be closed on November 20th due to the state election.
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
Product DetailSpecification/Dimensions
-
Length Under Neck (ℓ1)(mm)
-
type
- SN-TSC-EM4S
- SN-TSC-PEM4S
- SNR-TSC-EM4S
- SNR-TSC-PEM4S
- TSC-EM4S
- TSC-PEM4S
-
Outer Diameter (D)(φ)
-
Flute Length (ℓ)(mm)
-
Shank Diameter (d)(mm)
-
Overall Length (L)(mm)
-
Geometry
- Sharp Corner
- With Lead
-
Additional Classification
- Cutting Edge R Processing
- Standard Neck Relief
- Stocked Product
Days to Ship
-
- All
- 6 Day(s) or Less
- 7 Day(s) or Less
- 8 Day(s) or Less
Specify Alterations
TSC series carbide square end mill, 4-flute / 2D Flute Length (short) model (TSC-PEM4S2.5)
Click this image to zoom it.
Move the mouse over or click the image to zoom
- TS
- General Steel
- 4 Flutes
- S (Short)
Copy Part Number URL to Clipboard
The part number URL has been copied into your clipboard.
-
- Order Qty :
-
-
- Price :
- ---
-
- Total Price :
- ---
-
- Days to ship :
- ---
Select part number to Order Now/ Add to Cart
Similar Products
Product DetailProduct Description
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
| Part Number |
|---|
| TSC-PEM4S2.5 |
| Part Number | Price | Minimum Order Qty. | Volume Discount | Days to Ship | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Geometry | Additional Classification | Figure | ● Inventory Product □ Manufacturer Product |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
₹ 1,231.25 | 1 Piece(s) | 6 Day(s) or more | 2.5 | 5 | 4 | 40 | - | Sharp Corner | Stocked Product | 1 | ● |
Loading...
Specifications
| Model Number | Shank Diameter d |
Flute Length ℓ |
Overall Length L |
Figure | ||
| Outer Diameter D |
Shank Diameter d |
|||||
| TSC-EM4S (Standard) TSC-PEM4S (Sharp Edge) |
1 | — | 4 | 2 | 40 | 1 |
| 1.5 | — | 4 | 3 | 40 | 1 | |
| 2 | — | 4 | 4 | 40 | 1 | |
| 2 | 6 | 6 | 4 | 45 | 1 | |
| 2.5 | — | 4 | 5 | 40 | 1 | |
| 3 | — | 6 | 6 | 45 | 1 | |
| 3.5 | — | 6 | 7 | 45 | 1 | |
| 4 | — | 6 | 8 | 45 | 1 | |
| 4.5 | — | 6 | 9 | 45 | 1 | |
| 5 | — | 6 | 10 | 45 | 1 | |
| 5.5 | — | 6 | 11 | 45 | 2 | |
| 6 | — | 6 | 12 | 45 | 1 | |
| 6.5 | — | 8 | 13 | 50 | 1 | |
| 7 | — | 8 | 14 | 55 | 1 | |
| 7.5 | — | 8 | 15 | 55 | 1 | |
| 8 | — | 8 | 16 | 55 | 2 | |
| 8.5 | — | 10 | 17 | 60 | 1 | |
| 9 | — | 10 | 18 | 65 | 1 | |
| 9.5 | — | 10 | 19 | 65 | 1 | |
| 10 | — | 10 | 20 | 65 | 2 | |
| 12 | — | 12 | 24 | 75 | 2 | |
| 14 | — | 12 | 28 | 75 | 3 | |
| 15 | — | 16 | 30 | 80 | 1 | |
| 16 | — | 16 | 32 | 105 | 2 | |
| 18 | — | 16 | 36 | 105 | 3 | |
| 20 | — | 20 | 40 | 110 | 1 |
[ ! ]For shank diameter (d) specifications listed in blue, specify both a outer diameter (D) and shank diameter (d).
For Cutting Conditions, Refer to >>Click here.
More Information
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and ideal for high speed machining / dry machining.
Basic Information
| Work Material | General Steel / Heat-Treated Steel / Stainless Steel / Cast Iron / Aluminum Alloy / Copper Alloy | Number of Flutes(sheet) | 4 | Model | Square |
|---|---|---|---|---|---|
| Coating | For High Hardness (Silicone-Based) | Processing Applications | Flat Surface / Side Surface / Inclined Cutting | Torsion Angle (θ) | Standard Helix (30 to 40°) |
| Tolerance of OD(mm) | 0 ~ -0.02 |
Please check the type/dimensions/specifications of the part TSC-PEM4S2.5 in the TSC series carbide square end mill, 4-flute / 2D Flute Length (short) model series.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Product variants
| Part Number |
|---|
| TSC-EM4S12 |
| TSC-EM4S14 |
| TSC-EM4S15 |
| TSC-PEM4S20 |
| TSC-PEM4S3 |
| TSC-PEM4S3.5 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Geometry | Additional Classification | Figure | ● Inventory Product □ Manufacturer Product |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
₹ 3,774.38 | 1 Piece(s) | 6 Day(s) or more | 12 | 24 | 12 | 75 | - | With Lead | Stocked Product | 2 | ● | ||
₹ 7,852.64 | 1 Piece(s) | 6 Day(s) or more | 14 | 28 | 12 | 75 | - | With Lead | Stocked Product | 3 | ● | ||
₹ 16,441.18 | 1 Piece(s) | 6 Day(s) or more | 15 | 30 | 16 | 80 | - | With Lead | Stocked Product | 1 | ● | ||
₹ 16,536.00 | 1 Piece(s) | 6 Day(s) or more | 20 | 40 | 20 | 110 | - | Sharp Corner | Stocked Product | 1 | ● | ||
₹ 1,377.40 | 1 Piece(s) | 6 Day(s) or more | 3 | 6 | 6 | 45 | - | Sharp Corner | Stocked Product | 1 | ● | ||
₹ 2,286.85 | 1 Piece(s) | 6 Day(s) or more | 3.5 | 7 | 6 | 45 | - | Sharp Corner | Stocked Product | 1 | ● |
Payment Method
- Credit Card
-
- Debit Cart
-
- Net Banking
-
- UPI
-
- Cheque on delivery
-
- Online payment
-
Social Media
MISUMI India Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy
Thank you for your cooperation.
Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.
Privacy Policy