NAEM3ECSB UL Standard 300 V Mounted Signal

Specifications

Model Number	AWG Size	Number of Pairs *4 1P = 2 Cores	Total Length *3 or Specified Length
NAEM3ECSB	24	1P	1 ~ 100 (Specify 1 m Increment) / 500 / 1000
		2P
		3P
		5P
		6P
		8P
		10P
	22	1P
		2P
		3P
		5P
		6P
		8P
		10P

Be sure to read the following precautions when you place an order.
* Length in "m" is included in our model numbers. Always specify quantity as number of units, not as meters.
*1 Stock products are indicated with T or A in the price column at right.
*2 All unit prices above are per meter.
Unit Price Calculation Method [Formula: Last digits of model number (m) x unit price per meter above]
*3 Please note that when ordering 1000 m and 500 m, the order will be delivered as 100 m windings (we cannot accept orders for single cables).
*4 Check the indications for number of cores, pair number, core / pair number, and pair number / core when ordering.

More Information

Specifications

Model Number	AWG Size	Number of Pairs *1 1P = 2 Cores	Estimated Section Area (mm2) * 2	Twisted Structure (See Figure)	Number of Wire Cores	Finished Outer Diameter (mm) * 5	Approximate Mass kg/km	Electrical Properties				Conductor			Insulation		Wire Core Outer Diameter Approx. (mm)	Sheath		Specification
								Allowable Current A (30°C)* 3	Conductor Resistance Ω / km (20°C)	Insulation Properties MΩkm (20°C)	Withstand Voltage V / Min	Structure Strands / mm	Outer Diameter Approx. (mm)	Plating *4	Thickness (mm)	Material *4		Thickness (mm)	Material *4
NAEM3ECSB	24	1P	0.2	Twisted Pair	2	4.8	35	4.6	88.3 or less	100 or more	2000 AC	11/0.16	0.6	Tin	0.3	PE	1.2	0.9	PE	ULAWM21339
		2P			4	6.4	55	3.6										1.0
		3P			6	6.6	63	3.0										1.0
		5P			10	7.7	86	2.5										1.0
		6P			12	8.4	101	2.3										1.1
		8P			16	9.0	119	2.1										1.1
		10P			20	10.5	148	1.9										1.2
	22	1P	0.3		2	5.2	41	5.8	57.2 or less			17/0.16	0.76		0.32		1.4	0.9
		2P			4	7.0	66	4.5										1.0
		3P			6	7.3	79	3.8										1.0
		5P			10	8.7	114	3.1										1.1
		6P			12	9.6	135	2.9										1.2
		8P			16	10.2	158	2.6										1.2
		10P			20	11.9	195	2.4										1.3

*1 Please note that when the indicated Core / Pair is 1P (1PS), the number of wire cores will be "x 2-core".
*2 The size conversion is for reference only. Refer to the comparison table on >>Click here for details.
*3 The value of allowable current is to be used only as a reference value and is not guaranteed.
*4 How to View Materials
[Plating] Tin... Tin Plated Annealed Copper Wire
[Materials] PVC... Polyvinyl Chloride; PE... Polyethylene-based Material;
P... Polyester-based Material; Fluorine... Various Fluorine Resins; *... Other

Current Reduction Factor

Ambient Temperature (°C)	30	40	50	60	70
Current Reduction Factor	1.00	0.89	0.77	0.63	0.44

Allowable current value indicates the calculated value of 1 cable laid aboveground in ambient temperature of 30°C, and is not a guaranteed value.
If the ambient temperature is 30 °C or above, the above current reduction factor is multiplied by the allowable current.
(Example) Allowable current value 4.6 x 0.89 = 4.09 (A) when the ambient temperature for 1P AWG24 is 40 °C