• Due to the typhoon in Japan, large-scale blackout have occurred in Narita city where Misumi Shipping center is located, and the recovery is being delayed. (Newspaper article https://the-japan-news.com/news/article/0005997110 source: The Japan News) Because of the above reason, delivery of some products may be delayed. We apologize for any inconvenience and thank you for your understanding.

Dedicated PLC D-Sub Connector with Resin Hood

Dedicated PLC D-Sub Connector with Resin Hood

Omron D-sub Hood Recommended By Mitsubishi Q Series

  • PLC
  • EMI Countermeasure

● It is a D-sub connector hood that is widely used to connect various PLCs made by Mitsubishi.
● As the surface of the hood is plated with nickel, it is excellent in EMI (electromagnetic interference) countermeasures.

· This hood cannot be used for the following connectors.
EMI Pressure Welding D-sub
High-Current D-sub

PDF

Specifications

Dedicated PLC D-Sub Connector with Resin Hood:Related Image

ModelNumber of Cores
Parentheses show high-density type
Screw
Type
Weight
g
XM2S-09119 (15)M2.615
XM2S-151115 (26)19
XM2S-251125 (44)22
XM2S-371137 (62)26
XM2S-09139 (15)#4-4015
XM2S-151315 (26)19
XM2S-251325 (44)22
XM2S-371337 (62)26
Sales: Misumi / Manufacturer: Omron Corporation

More Information

Dedicated PLC D-Sub Connector with Resin Hood:Related Image

Material / Finish
ItemMaterialsFinish
HoodABS ResinNickel-plated
Fixing Screws for BondingBrassNickel-plated
BootsVinyl ChlorideGray

Reference
PLC Models Using Omron D-sub Connector
Made by Mitsubishi Electric
● Q Series
· QX81
· QX81P
* PLC corresponding harnesses are also available.
Part Number
XM2S-0911
XM2S-0913
XM2S-1511
XM2S-1513
XM2S-2511
XM2S-2513
XM2S-3711
XM2S-3713
Part NumberVolume DiscountDays to ShipConnector series initials Number Of Cores Screw type
6 Day(s) or more D· E· F9 ~ 15M2.6
6 Day(s) or more D· E· F9 ~ 15#4-40
6 Day(s) or more D· E· F15 ~ 26M2.6
6 Day(s) or more D· E· F15 ~ 26#4-40
6 Day(s) or more D· E· F25 ~ 44M2.6
6 Day(s) or more D· E· F25 ~ 44#4-40
6 Day(s) or more D· E· F37 ~ 62M2.6
6 Day(s) or more D· E· F37 ~ 62#4-40

Loading...

  1. 1

Compatible Wire Size

Connector Type Compatible Wire Size
AWG Size Conductor Cross-Sectional Area (mm2)
Solder Connection Type Finer than 20 Less than 0.53
Pressure Weld Connection Type 1.27 mm Pitch 28 Flat Cable
High-density Solder Connection Type 22 ~ 28 0.08 ~ 0.32
Terminal Block Built in Type 14 ~ 26 2.0 ~ 1.5
High Current Type For 10A 16 ~ 12 0.3 ~ 1.25
For 20A 12 ~ 18 0.75 ~ 3.5
・ When mounting a hood, the wires in the table at left may not be usable, depending on the cable extraction port diameter. Use with due attention to the cable finished outer diameter, etc.

Panel Size

Solder Connection / Pressure Weld Connection Type
● Dimension Table
Number of Cores A±0.15 B±0.2 C±0.2
High Current Type High-density type Others
- 15 9 24.99 20.6 12.0
3 26 15 33.32 28.8 12.0
5 44 25 47.04 42.6 12.0
8 62 37 63.50 59.0 12.0
- 78 50 61.11 56.6 15.2
Mounting holes for panel front and rear mounting are common.

Pressure Weld Connection Type

a. Dimensions when mounting the connector from panel front
● Dimension Table
Number of Cores A1 B1
9 24.99 22.00
15 33.32 30.30
25 47.04 44.00
37 63.05 60.50
b. Dimensions when mounting the connector from panel rear
● Dimension Table
Number of Cores A2 B2
9 24.99 20.20
15 33.32 28.60
25 47.04 42.50
37 63.05 59.20

Contact Arrangement Diagram

Shell Size Group E A B C D
Standard Type
High-density type

Basic Information

Connector Shape Square shape D· E· F Dsub Protection function (environmentally resistant) None

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
TEL:124- 468-8841 / FAX:124-468-8811
9:00am - 5:30pm (Monday -Saturday)