(!)NOTE : Windows 7 users won’t be able to use some latest features of eCatalog/WOS since Microsoft is ending support for Windows 7 on 14 Jan, 2020. Please upgrade your system for uninterrupted services.
Select part number to Order Now/ Add to Cart
This is an economy item, The price is cheaper than the MISUMI standard product.
[Features]
The outer layer of the shrink tube is made of soft polyolefin.
Shrinks quickly at temperatures as low as 90°C.
Shrink tubing designed to protect wiring harnesses. electronic components and other uses
Shrinkage ratio 2:1 to less than 3:1
Operating temperature range -55-125°C
Before heat shrink tube (mm) | After heat shrink tube (mm) | |||||||||||||||
Part number | Inner Diameter D | Wall Thickness H | Maximum Inner Diameter d | Wall Thickness h | ||||||||||||
MTUBE-DW-1 | 1.5±0.3 | 0.20±0.05 | 0.60 | 0.33±0.06 | ||||||||||||
MTUBE-DW-2 | 2.5±0.3 | 0.20±0.05 | 1.00 | 0.44±0.06 | ||||||||||||
MTUBE-DW-3 | 3.5±0.3 | 0.25±0.05 | 1.50 | 0.44±0.06 | ||||||||||||
MTUBE-DW-4 | 4.5±0.3 | 0.25±0.05 | 2.00 | 0.44±0.06 | ||||||||||||
MTUBE-DW-5 | 5.5±0.3 | 0.28±0.05 | 2.50 | 0.56±0.06 | ||||||||||||
MTUBE-DW-6 | 6.5±0.3 | 0.28±0.05 | 3.00 | 0.56±0.06 | ||||||||||||
MTUBE-DW-7 | 7.6±0.3 | 0.30±0.07 | 3.50 | 0.56±0.07 | ||||||||||||
MTUBE-DW-8 | 8.6±0.3 | 0.30±0.07 | 4.00 | 0.56±0.07 | ||||||||||||
MTUBE-DW-9 | 9.6±0.3 | 0.30±0.07 | 4.50 | 0.56±0.07 | ||||||||||||
MTUBE-DW-10 | 10.7±0.4 | 0.30±0.07 | 5.00 | 0.56±0.07 | ||||||||||||
MTUBE-DW-11 | 11.7±0.4 | 0.30±0.07 | 5.50 | 0.56±0.07 | ||||||||||||
MTUBE-DW-12 | 12.7±0.4 | 0.30±0.07 | 6.00 | 0.56±0.07 | ||||||||||||
MTUBE-DW-15 | 15.7±0.5 | 0.35±0.08 | 7.50 | 0.69±0.08 | ||||||||||||
MTUBE-DW-20 | 21.0±0.5 | 0.40±0.10 | 10.00 | 0.77±0.10 |
heat shrink tube Material | heat shrink tube Polyolefin | ||||||||
Shrinkage Ratio | 2:1 | ||||||||
Operating Temperature Range | -55-125℃ | ||||||||
Initial Shrinkage Temperature | 70℃ | ||||||||
Minimum Complete Shrinkage Temperature | 90℃ (30 seconds) |
heat shrink tube Item | Indicator Requirements | heat shrink tube Test Method | Typical Value | ||||||||||||||||
Longitudinal Shrinkage Rate (200±5 ℃ for 3 minutes) | ±10% | ASTM D 2671 | ±7% | ||||||||||||||||
Tensile Strength | ≥9.0MPa | ASTM D 638 | 10 Mpa | ||||||||||||||||
Breakage Elongation | ≥250% | ASTM D 638 | 500% | ||||||||||||||||
Breakage Elongation After Aging (Thermal aging for 168 hours at 158℃) | ≥100% | ASTM D 638 | 300% | ||||||||||||||||
Thermal Shock (200±5 ℃ for 4 hours) | The outer layer is crack free, trickling free and dripping free | ASTM D 2671 | pass | ||||||||||||||||
Low Temperature Flexibility (4 hours at -55 ℃) | Crack Free | ASTM D 2671 | pass | ||||||||||||||||
Dielectric Strength and Breakdown | 2500V, 60sec, no breakdown | ASTM D 2671 | pass | ||||||||||||||||
Volume Resistivity | ≥1012Ω·cm min. | ASTM D 876 | 1014Ω·cm | ||||||||||||||||
Copper Corrosion (121±2℃ for 16 hours) | No Corrosion | ASTM D 2671 | pass | ||||||||||||||||
Copper Stability (168 hours at 158 ℃) | Elongation≥100% | ASTM D 2671 | pass |
Packing heat shrink tube Specification | Before Shrinkage (mm) | After Shrinkage (mm) | ||||||||||||||
Part number | Inner Diameter D | Wall Thickness H | Maximum Inner Diameter d | Wall Thickness h | ||||||||||||
MTUBE-DW-1 | 100m/roll | 1.5±0.3 | 0.20±0.05 | 0.60 | 0.33±0.06 | |||||||||||
MTUBE-DW-2 | 2.5±0.3 | 0.20±0.05 | 1.00 | 0.44±0.06 | ||||||||||||
MTUBE-DW-3 | 3.5±0.3 | 0.25±0.05 | 1.50 | 0.44±0.06 | ||||||||||||
MTUBE-DW-4 | 4.5±0.3 | 0.25±0.05 | 2.00 | 0.44±0.06 | ||||||||||||
MTUBE-DW-5 | 5.5±0.3 | 0.28±0.05 | 2.50 | 0.56±0.06 | ||||||||||||
MTUBE-DW-6 | 6.5±0.3 | 0.28±0.05 | 3.00 | 0.56±0.06 | ||||||||||||
MTUBE-DW-7 | 7.6±0.3 | 0.30±0.07 | 3.50 | 0.56±0.07 | ||||||||||||
MTUBE-DW-8 | 8.6±0.3 | 0.30±0.07 | 4.00 | 0.56±0.07 | ||||||||||||
MTUBE-DW-9 | 9.6±0.3 | 0.30±0.07 | 4.50 | 0.56±0.07 | ||||||||||||
MTUBE-DW-10 | 50m/roll | 10.7±0.4 | 0.30±0.07 | 5.00 | 0.56±0.07 | |||||||||||
MTUBE-DW-11 | 11.7±0.4 | 0.30±0.07 | 5.50 | 0.56±0.07 | ||||||||||||
MTUBE-DW-12 | 12.7±0.4 | 0.30±0.07 | 6.00 | 0.56±0.07 | ||||||||||||
MTUBE-DW-15 | 15.7±0.5 | 0.35±0.08 | 7.50 | 0.69±0.08 | ||||||||||||
MTUBE-DW-20 | 21.0±0.5 | 0.40±0.10 | 10.00 | 0.77±0.10 |
Shrinkage Rate | 2:1 to Less Than 3:1 |
---|
Please check the type/dimensions/specifications of the part MTUBE-DW-3 in the Heat Shrink Tubes With Low Temp 90℃, Shrinkage2:1 series.
Part Number |
---|
MTUBE-DW-12 |
MTUBE-DW-15 |
MTUBE-DW-2 |
MTUBE-DW-4 |
MTUBE-DW-5 |
MTUBE-DW-6 |
Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Internal diameter (before contraction) (mm) | Wall Thickness (after shrinking) (mm) | Internal diameter (mm) | Packing Specification |
---|---|---|---|---|---|---|---|---|
₹ 2,624.42 | 1 Piece(s) | Available | 14 Day(s) | 12.7 | 0.56 | 6 | 50 m/roll | |
₹ 3,439.44 | 1 Piece(s) | Available | 14 Day(s) | 15.7 | 0.69 | 7.5 | 50 m/roll | |
₹ 1,522.96 | 1 Piece(s) | Available |
Same day
Stock | 2.5 | 0.44 | 1 | 100 m/roll | |
₹ 2,038.35 | 1 Piece(s) | Available | 14 Day(s) | 4.5 | 0.44 | 2 | 100 m/roll | |
₹ 2,101.83 | 1 Piece(s) | Available | 14 Day(s) | 5.5 | 0.56 | 2.5 | 100 m/roll | |
₹ 2,254.82 | 1 Piece(s) | Available | 14 Day(s) | 6.5 | 0.56 | 3 | 100 m/roll |
How can we improve?
How can we improve?
Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy
Thank you for your cooperation.
Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.
Privacy Policy