Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(1 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

DMS3102A-18-19-S-Y

Allowable Voltage Applicable pin/contact Number Of Pins Allowable Current Shell size Key position change Key position (angle) CAD Days to Ship

Specification/Dimensions

Allowable Voltage(V)
200

250

500

700

900

1250

1750
Clear
Applicable pin/contact
- Male (plug)
- Female (socket)
Clear
Number Of Pins
1

2

3

4

5

6

7

8

9

10

11

14

16

17

19

20

22

24

26

30

31

35

37

48

52

54

73
Clear
Allowable Current(A)
13

23

46

80

150
Clear
Shell size
10SL

12S

14S

16

16S

18

20

22

24

28

32

32A

36
Clear
Key position change
- N/A
- W
- X
- Y
- Z
Clear
Key position (angle)(Degree)
35

45

70

80

90

110

120

125

145

170

180

215

235

240

250

265

270

280

290

325
Clear
CAD
- 2D
Clear

Days to Ship

All

Same day

5 Day(s) or Less

6 Day(s) or Less

10 Day(s) or Less

14 Day(s) or Less
Clear

Specify Alterations

MS3102-Series Panel Mount Receptacle (DMS3102A-18-19-S-Y)

Name: MS3102-Series Panel Mount Receptacle
Brand: MISUMI
Price: 2050.31 INR
Availability: PreOrder

MS3102-Series Panel Mount Receptacle (DMS3102A-18-19-S-Y)

Click this image to zoom it.

Move the mouse over or click the image to zoom

MIL
Solder
Silver-Plated

Brand :

MISUMI

Order Qty :
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

● MIL-DTL-5015 compliant (MIL-C-5015) connector.
● The mating components of the mounting receptacle are the straight plug and the angle plug.

· The MMS series does not support key position changes.
· For mounting the junction shell, only the NMS series can be installed.
· Other companies' MS connectors can be fitted, but dimensions and characteristics may vary depending on the manufacturer. Check components carefully before use.
· Please note that parts can be mated with the waterproof model MS connectors / cable clamps, but this will invalidate their waterproofing.

Product Description

Available from Japan Aviation Electronics Industry (JAE) and Daiichi Denshi Kogyo (DDK). Robust panel mounting connector.

[Features]
● This product is available from Misumi, Japan Aviation Electronics Industry (JAE), and Daiichi Denshi Kogyo (DDK).
● MIL-DTL-5015 (MIL-C-5015) compliant connector

Specifications

MS3102-Series Panel Mount Receptacle:Related Image

Factory Code	Model Number	Shell	Arrangement	Contact Shape	Number of Cores	Model Number		Factory Code	Model Number	Shell	Arrangement	Contact Shape	Number of Cores	Model Number
Factory Code	Model Number	Shell	Arrangement	Contact Shape	Number of Cores	Male P		Factory Code	Model Number	Shell	Arrangement	Contact Shape	Number of Cores	Female S
D	MS3102A Panel Mount Receptacle * The mating components are: · Straight Plugs · Angled Plugs MS3106B MS3108B	10SL	3	P Male (Pin) S Female (Socket)	3	D/MS3102A10SL-3P		D	MS3102A Panel Mount Receptacle * The mating components are: · Straight Plugs · Angled Plugs MS3106B MS3108B	10SL	3	P Male (Pin) S Female (Socket)	3
D		10SL	4		2	D/MS3102A10SL-4P		D		10SL	4		2
M		12S	3		2	MMS3102A-12S-3-P		M		12S	3		2	MMS3102A-12S-3-S
N		12S	3		2	N/MS3102A12S-3P		N		12S	3		2	N/MS3102A12S-3S
D		14S	1		3	D/MS3102A14S-1P		D		14S	1		3	D/MS3102A14S-1S
M			2		4	MMS3102A-14S-2-P		M			2		4	MMS3102A-14S-2-S
N			2		4	N/MS3102A14S-2P		N			2		4	N/MS3102A14S-2S
D			5		5	D/MS3102A14S-5P		D			5		5	D/MS3102A14S-5S
M			6		6	MMS3102A-14S-6-P		M			6		6	MMS3102A-14S-6-S
N			6		6	N/MS3102A14S-6P		N			6		6	N/MS3102A14S-6S
M			7		3	MMS3102A-14S-7-P		M			7		3	MMS3102A-14S-7-S
N			7		3	N/MS3102A14S-7P		N			7		3	N/MS3102A14S-7S
D			9		2	D/MS3102A14S-9P		D			9		2	D/MS3102A14S-9S
M		16S	1		7	MMS3102A-16S-1-P		M		16S	1		7	MMS3102A-16S-1-S
N			1		7	N/MS3102A16S-1P		N			1		7	N/MS3102A16S-1S
D			5		3	D/MS3102A16S-5P		D			5		3	D/MS3102A16S-5S
D			8		5	D/MS3102A16S-8P		D			8		5	D/MS3102A16S-8S
M		16	10		3	MMS3102A-16-10-P		M		16	10		3	MMS3102A-16-10-S
N		16	10		3	N/MS3102A16-10P		N		16	10		3	N/MS3102A16-10S
M		18	1		10	MMS3102A-18-1-P		M		18	1		10	MMS3102A-18-1-S
N			1		10	N/MS3102A18-1P		N			1		10	N/MS3102A18-1S
D			4		4	D/MS3102A18-4P		D			4		4	D/MS3102A18-4S
D			5		3	D/MS3102A18-5P		D			5		3	D/MS3102A18-5S
D			8		8	D/MS3102A18-8P		D			8		8	D/MS3102A18-8S
M			10		4	MMS3102A-18-10-P		M			10		4	MMS3102A-18-10-S
D			10		4	D/MS3102A18-10P		D			10		4	D/MS3102A18-10S
M			11		5	MMS3102A-18-11-P		M			11		5	MMS3102A-18-11-S
N			11		5	N/MS3102A18-11P		N			11		5	N/MS3102A18-11S
D			12		6	D/MS3102A18-12P		D			12		6	D/MS3102A18-12S
D			19		10	D/MS3102A18-19P		D			19		10	D/MS3102A18-19S
D			20		5	D/MS3102A18-20P		D			20		5	D/MS3102A18-20S
D			21		3	D/MS3102A18-21P		D			21		3	D/MS3102A18-21S
D			22		3	D/MS3102A18-22P		D			22		3	D/MS3102A18-22S
D		20	2		1	D/MS3102A20-2P		D		20	2		1	D/MS3102A20-2S
M			4		4	MMS3102A-20-4-P		M			4		4	MMS3102A-20-4-S
N			4		4	N/MS3102A20-4P		N			4		4	N/MS3102A20-4S
D			7		8	D/MS3102A20-7P		D			7		8	D/MS3102A20-7S
M			15		7	MMS3102A-20-15-P		M			15		7	MMS3102A-20-15-S
N			15		7	N/MS3102A20-15P		N			15		7	N/MS3102A20-15S
M			16		9	MMS3102A-20-16-P		M			16		9	MMS3102A-20-16-S
N			16		9	N/MS3102A20-16P		N			16		9	N/MS3102A20-16S
D			17		6	D/MS3102A20-17P		D			17		6	D/MS3102A20-17S
D			18		9	D/MS3102A20-18P		D			18		9	D/MS3102A20-18S
D			22		6	D/MS3102A20-22P		D			22		6	D/MS3102A20-22S
D			23		2	D/MS3102A20-23P		D			23		2	D/MS3102A20-23S
M			27		14	MMS3102A-20-27-P		M			27		14	MMS3102A-20-27-S
N			27		14	N/MS3102A20-27P		N			27		14	N/MS3102A20-27S
M			29		17	MMS3102A-20-29-P		M			29		17	MMS3102A-20-29-S
N			29		17	N/MS3102A20-29P		N			29		17	N/MS3102A20-29S
M		22	2		3	MMS3102A-22-2-P		M		22	2		3	MMS3102A-22-2-S
N			2		3	N/MS3102A22-2P		N			2		3	N/MS3102A22-2S
D			10		4	D/MS3102A22-10P		D			10		4	D/MS3102A22-10S
M			14		19	MMS3102A-22-14-P		M			14		19	MMS3102A-22-14-S
N			14		19	N/MS3102A22-14P		N			14		19	N/MS3102A22-14S
D			19		14	D/MS3102A22-19P		D			19		14	D/MS3102A22-19S
M			22		4	MMS3102A-22-22-P		M			22		4	MMS3102A-22-22-S
N			22		4	N/MS3102A22-22P		N			22		4	N/MS3102A22-22S
M			23		8	MMS3102A-22-23-P		M			23		8	MMS3102A-22-23-S
N			23		8	N/MS3102A22-23P		N			23		8	N/MS3102A22-23S
D			28		7	D/MS3102A22-28P		D			28		7	D/MS3102A22-28S
D		24	2		7	D/MS3102A24-2P		D		24	2		7	D/MS3102A24-2S
D			5		16	D/MS3102A24-5P		D			5		16	D/MS3102A24-5S
M			7		16	MMS3102A-24-7-P		M			7		16	MMS3102A-24-7-S
N			7		16	N/MS3102A24-7P		N			7		16	N/MS3102A24-7S
M	10		7	MMS3102A-24-10-P		M	10	7	MMS3102A-24-10-S
N	10		7	N/MS3102A24-10P		N	10	7	N/MS3102A24-10S
M	11		9	MMS3102A-24-11-P		M	11	9	MMS3102A-24-11-S
N	11		9	N/MS3102A24-11P		N	11	9	N/MS3102A24-11S
M	20		11	MMS3102A-24-20-P		M	20	11	MMS3102A-24-20-S
N	20		11	N/MS3102A24-20P		N	20	11	N/MS3102A24-20S
D	22		4	D/MS3102A24-22P		D	22	4	D/MS3102A24-22S
M	28		24	MMS3102A-24-28-P		M	28	24	MMS3102A-24-28-S
N	28		24	N/MS3102A24-28P		N	28	24	N/MS3102A24-28S

Factory Code	Model Number	Shell	Arrangement	Contact Shape	Number of Cores	Model Number	Factory Code	Model Number	Shell	Arrangement	Contact Shape	Number of Cores	Model Number
Factory Code	Model Number	Shell	Arrangement	Contact Shape	Number of Cores	Male P	Factory Code	Model Number	Shell	Arrangement	Contact Shape	Number of Cores	Female S
M	MS3102A Panel Mount Receptacle * The mating components are: · Straight Plugs · Angled Plugs MS3106B MS3108B	28	6	P Male (Pin) S Female (Socket)	3	MMS3102A-28-6-P	M	MS3102A Panel Mount Receptacle * The mating components are: · Straight Plugs · Angled Plugs MS3106B MS3108B	28	6	P Male (Pin) S Female (Socket)	3	MMS3102A-28-6-S
N			6		3	N/MS3102A28-6P	N			6		3	N/MS3102A28-6S
D			10		7	D/MS3102A28-10P	D			10		7	D/MS3102A28-10S
M			11		22	MMS3102A-28-11-P	M			11		22	MMS3102A-28-11-S
N			11		22	N/MS3102A28-11P	N			11		22	N/MS3102A28-11S
M			12		26	MMS3102A-28-12-P	M			12		26	MMS3102A-28-12-S
N			12		26	N/MS3102A28-12P	N			12		26	N/MS3102A28-12S
D			15		35	D/MS3102A28-15P	D			15		35	D/MS3102A28-15S
D			16		20	D/MS3102A28-16P	D			16		20	D/MS3102A28-16S
M			20		14	MMS3102A-28-20-P	M			20		14	MMS3102A-28-20-S
N			20		14	N/MS3102A28-20P	N			20		14	N/MS3102A28-20S
M			21		37	MMS3102A-28-21-P	M			21		37	MMS3102A-28-21-S
N			21		37	N/MS3102A28-21P	N			21		37	N/MS3102A28-21S
D		32A	10		54	D/MS3102A32A-10P	D		32A	10		54	D/MS3102A32A-10S
D		32	1		5	D/MS3102A32-1P	D		32	1		5	D/MS3102A32-1S
D			2		5	D/MS3102A32-2P	D			2		5	D/MS3102A32-2S
D			5		2	D/MS3102A32-5P	D			5		2	D/MS3102A32-5S
N			7		35	N/MS3102A32-7P	N			7		35	N/MS3102A32-7S
D			8		30	D/MS3102A32-8P	D			8		30	D/MS3102A32-8S
D			9		14	D/MS3102A32-9P	D			9		14	D/MS3102A32-9S
D			17		4	D/MS3102A32-17P	D			17		4	D/MS3102A32-17S
D			414		52	D/MS3102A32-414P	D			414		52	D/MS3102A32-414S
D		36	3		6	D/MS3102A36-3P	D		36	3		6	D/MS3102A36-3S
D			4		3	D/MS3102A36-4P	D			4		3	D/MS3102A36-4S
M			5		4	MMS3102A-36-5-P	M			5		4	MMS3102A-36-5-S
N			5		4	N / MS3102A36-5P	N			5		4	N/MS3102A36-5S
D			9		31	D/MS3102A36-9P	D			9		31	D/MS3102A36-9S
M			10		48	MMS3102A-36-10-P	M			10		48	MMS3102A-36-10-S
N			10		48	N/MS3102A36-10P	N			10		48	N/MS3102A36-10S
D			73		73	D/MS3102A36-73P	D			73		73	D/MS3102A36-73S

More Information

Shell Size	A Screw	Size (mm)
Shell Size	A Screw	B or more	K or less	L or less	M +0.79 -0	ØN +0 -4.78	R ± 0.13	S ± 0.79	ØT +0.25 -0.13
10SL	5 / 8-24UNEF-2A	9.53	2.1	21.9	14.28	15.9	18.26	25.4	3.05
12S	3 / 4-20UNEF-2A	9.52	2.4	24.3	14.27	19.86	20.62	27.79	3.05
14S	7 / 8-20UNEF-2A	9.52	2.4	24.3	14.27	23.01	23.01	30.18	3.05
16S	1-20UNEF-2A	9.52	2.4	24.3	14.27	26.21	24.61	32.54	3.05
16	1-20UNEF-2A	15.88	2.4	29.1	19.05	26.21	24.61	32.54	3.05
18	1-1 / 8-18UNEF-2A	15.88	3.0	28.6	19.05	29.36	26.97	34.92	3.05
20	1-1 / 4-18UNEF-2A	15.88	3.0	29.4	19.05	32.56	29.36	38.10	3.05
22	1-3 / 8-18UNEF-2A	15.88	3.0	29.4	19.05	35.71	31.75	41.28	3.05
24	1-1 / 2-18UNEF-2A	15.88	3.0	33.4	20.62	38.91	34.92	44.45	3.73
28	1-3/4-18UNS-2A	15.88	3.0	33.4	20.62	45.26	39.67	50.80	3.73
32,32A	2-18UNS-2A	15.88	4.3	33.4	22.22	51.26	44.45	57.15	4.39
36	2-1/4-16UN-2A	15.88	4.3	33.4	22.22	57.96	49.23	63.50	4.39

Rear Mounting Panel Thickness Limit

Shell Size of Panel Mount Used	Panel Thickness
12S, 14S, 16S, 24, 28	4.5mm or less
10SL, 16, 18, 20, 22	3.0mm or less
32,36	6.0mm or less

: 30; 45; 60

Part Number
DMS3102A-18-19-S-Y

Part Number	Price	Minimum Order Qty.	Volume Discount	Days to Ship	RoHS	Applicable pin/contact	Number Of Pins	Allowable Current (A)	Allowable Voltage (V)	Shell size	Key position change	Key position (angle) (Degree)	Notice	Notice	Note: Current
	₹ 2,050.31	1 Piece(s)		14 Day(s) or more	10	Female (socket)	10	13	500 ～ 700	18	Y	240	700V	500V	-

MIL Standard Compliant MS Connector

Common Specifications

Applicable Wire Size and Contact Size

Appropriate wire coating stripping length is the dimension of the contact solder hole length (L size) plus about 1 ~ 3 mm. Please note that the L dimension and D dimension of the male connector (pin) and the female connector (socket) are the same. When selecting the cable, please check if the cable fits into the inner diameter of the cable clamp.

Contact				Compatible Electric Wire Size
Contact Size	Solder Hole Diameter φD (mm)	Pin Contact Contacting Part Diameter φA (mm)	L (mm)	AWG	Conductor Section Area mm²
#16	1.85	1.6	6.4	16 ~ 20	1.25 or less
#12	2.95	2.4	9.5	12 ~ 14	3.5 or less
#8	5.31	3.6	12.7	8 ~ 10	8 or less
#4	8.45	5.7	15.9	4 ~ 6	22 or less
#0	11.91	9.1	15.9	0 ~ 2	50 or less

Electrical Properties

Contact Resistance	Contact Size	Test Current DC	Voltage Drop	Couple the male and the female side of the connector the same way as in operating conditions, send test current, measure using the voltage drop method and fulfill the value on the left.
	#16	20 A	21 mV or lower
	#12	35 A	20 mV or lower
	#8	60 A	12 mV or lower
	#4	110 A	10 mV or lower
	#0	200 A	10 mV or lower

Mechanical Properties

	Test Category Symbol			VAC (r.m.s.)
Thermal Shock	Low Temperature			High Temperature			Carry out 5 consecutive cycles, with the low temperature and high temperature on the left as 1 cycle. The time exposed to low and high temperature must be 30 minutes or more.
	-55 +0℃ -5℃			+125 +3℃ -0℃
	(1) There should be no cracks or damage in the connector. (2) After completion, the voltage resistance test should be satisfied.
Humidity Resistance	The following voltage resistance should be satisfied.						Expose the coupled connectors and panel mount to temperature 71±2°C and relative humidity 95±3% for 14 days, and then, without drying, perform the voltage resistance test in the left table for 5 minutes.
	INST			300
	A			750
	D			1,350
	E			1,875
	B			2,775
	C			4,500
Corrosion	(1) There should be no exposed metal or corrosion damaging the coupling or detachment of the connector. (2) Measurement of Contact Resistance						Expose for 48 hours to salt spray with concentration 5% and temperature 35°C; after that, wash under running water and dry for 12 hours in an air-circulating chamber at temperature of 38±3°C; finally, perform contact resistance and voltage resistance tests.
	Contact Size		Test Current		Voltage Drop (or Less)
	#16		20 A		35 mV
	#12		35		30
	#8		60		25
	#4		110		20
	#0		200		20
	(3) The voltage resistance in the following table should be satisfied.
	Test Category Symbol	VAC (r.m.s.)		Category Symbol		VAC (r.m.s.)
	INST	400		E		2,500
	A	1,000		B		3,500
	D	1,800		C		6,000

Environmental Properties

Single Contact Insertion and Removal Force	Contact Size	Average	Maximum	Minimum	Insertion and removal force is measured using a randomly extracted male and female. The average force should be at or below the average values shown on the left, and 96% of all values should be at or below the maximum values and at or above the minimum values.
	#16	0.95 kg	1.36 kg	0.11 kg
	#12	1.59	2.27	0.23
	#8	3.18	4.54	0.34
	#4	4.76	6.8	0.45
	#0	6.35	9.07	0.91
Contact Retention Force	Contact Size	Axial Load (kg)	Contact Size	Axial Load (kg)	It should withstand axial load in both directions as shown on the left.
	#16	4.5	#4	9.1
	#12	6.8	#0	11.3
	#8	9.1
Vibration	(1) There should be no current cut-off of 10 μsec or more during the test. (2) After completion, the voltage resistance test should be satisfied. (3) There should be no disconnection of the coupling, cracks, damage or looseness in any part.				Connect the wired connector and the panel mount by the usual method, and perform a vibration test using MIL-STD-1344. During the test, pass 100 mA current through the connector, inspect interruption of the current by a suitable method, and perform a voltage resistance test and visual inspection.
Impact	(1) After completion, the requirements for contact resistance should be satisfied. (2) There should be no cracks, damage or looseness in any part.				Apply acceleration of 50 G at a 90° angle to each axis direction to the wired and coupled connector and panel mount.
Service Life	(1) The requirements for contact resistance should be satisfied. (2) There should be no electrical or mechanical abnormalities.				Remove the coupling nut of the connector and insert and remove it 600 times at a speed not exceeding 500 times per 1 hour.

Contact Arrangement Table (by number of cores) View from the male (pin) connector coupling surface.

Arrangement No.

The left side is the shell size of the entire connector. The right side is the arrangement number of the contact. Together these compose the Arrangement Number.
Arrangement No.

Core Number Composition

The right side is the size of 1 contact. The left side is the number of contacts.
Core Number Composition

When ordering parts, please determine the voltage, current, number of cores, size, etc. from the table below, depending on the working environment.

Arrangement No.		Contact Shape	Contact Composition			Rated Current (A) (Note 1)	Insulation Resistance MΩ (or higher)	Rated Voltage (Note 2) (Note 3)		Test Category Symbol (Note 4)
Shell Size	Arrangement Number	Contact Shape	Total Number of Cores	Core Number Composition	Contact Size	Rated Current (A) (Note 1)	Insulation Resistance MΩ (or higher)	VDC or less Text shows Contact No.	VAC (r.m.s.) or less Text shows Contact No. Parentheses show voltage resistance / VAC (rms)	Test Category Symbol (Note 4)
10SL	3	P Male (Pin) S Female (Socket)	3	3	#16	13	5,000	700	500 (2000)	A
10SL	4		2	2
12S	3		2	2
14S	1		3	3
	2		4	4				250	200 (1000)	INST
	5		5	5
	6		6	6
	7		3	3				700	500 (2000)	A
	9		2	2
16S	1		7	7
	5		3	3
	8		5	5
16	10		3	3	#12	23
18	1		10	10	#16	13		BCFG-700, Others-250	BCFG-500 (2000), Others-200 (1000)	A (BCFG) INST (Others)
	4		4	4	#16	13		1,250	900 (2800)	D
	5		3	2	#12	23
	5		3	1	#16	13
	8		8	1	#12	23		700	500 (2000)	A
	8		8	7	#16	13
	10		4	4	#12	23
	11		5	5	#12	23
	12		6	6	#16	13
	19		10	10
	20		5	5
	21		3	3	#12	23
	22		3	3	#16	13		1,250	900 (2800)	D
20	2		1	1	#0	150		ABHG-1250, CDEF-700	ABHG-900 (2800), CDEF-500 (2000)	D (ABHG) A (CDEF)
	4		4	4	#12	23		700	500 (2000)	A
	7		8	8	#16	13
	15		7	7	#12	23
	16		9	2	#12	23
	16		9	7	#16	13
	17		6	5	#12	23
	17		6	1	#16	13
	18		9	3	#12	23
	18		9	6	#16	13
	22		6	3	#8	46
	22		6	3	#16	13
	23		2	2	#8	46
	27		14	14	#16	13
	29		17	17	#16	13
22	2		3	3	#8	46		1,250	900 (2800)	D
	10		4	4	#16	13		1,750	1250 (3500)	E
	14		19	19				700	500 (2000)	A
	19		14	14
	22		4	4	#8	46
	23		8	8	#12	23		H-1250, Others-700	H-900 (2800), Others-500 (2000)	D (H) A (Others)
	28		7	7				700	500 (2000)	A
24	2		7	7				1,250	900 (2800)	D
	5		16	16	#16	13		700	500 (2000)	A
	7		16	2	#12	23
	7		16	14	#16	13
	10		7	7	#8	46
	11		9	3	#8	46
	11		9	6	#12	23
	20		11	2	#12	23		1,250	900 (2800)	D
	20		11	9	#16	13
	22		4	4	#8	46
	28		24	24	#16	13		250	200 (1000)	INST
28	6	P Male (Pin) S Female (Socket)	3	3	#4	80	5,000	1,250	900 (2800)	D
	10		7	2	#4	80		G-1250, Others-700	G-900 (2800), 2 #8 46 Others-500 (2000)	D (G) A (Others)
				2	#8	46
				3	#12	13
	11		22	4	#12	13		700	500 (2000)	A
	11		22	18	#16	13
	12		26	26
	15		35	35
	16		20	20
	20		14	10	#12	23
	20		14	4	#16	13
	21		37	37	#16	13
32	1		5	2	#0	150		A-1750, Others-1250	A-1250 (3500), Others-900 (2800)	(A) D (Others)
	1		5	3	#12	23		A-1750, Others-1250	A-1250 (3500), Others-900 (2800)	(A) D (Others)
	2		5	3	#4	80		1,750	1250 (3500)	E
	2		5	2	#16	13		1,750	1250 (3500)	E
	5		2	2	#0	150		1,250	900 (2800)	D
	7		35	7	#12	23		ABhj-250, Others-700	ABhj-200 (1000), Others-500 (2000)	INST (ABhj) A (Others)
	7		35	28	#16	13		ABhj-250, Others-700	ABhj-200 (1000), Others-500 (2000)	INST (ABhj) A (Others)
	8		30	6	#12	23		700	500 (2000)	A
	8		30	24	#16	13		700	500 (2000)	A
	9		14	2	#4	80		1,250	900 (2800)	D
	9		14	12	#16	13		1,250	900 (2800)	D
32 A	10		54	54	#16	13		700	500 (2000)	A
32	17		4	4	#4	80		1,250	900 (2800)	D
32	414		52	52	#16	13		700	500 (2000)	A
36	3		6	3	#0	150		1,250	900 (2800)	D
	3		6	3	#12	23		1,250	900 (2800)	D
	4		3	3	#0	150		A-1250, BC-700	A-900 (2800), BC-500 (2000)	D (A) A (BC)
	5		4	4	#0	150		700	500 (2000)	A
	9		31	1	#4	80
				2	#8	46
				14	#12	23
				14	#16	13
	10		48	48
	73		73	73
48	5		100	1	#8	46
				9	#12	23
				90	#16	13

Note 1: Rated current is the value for single contacts when incorporated in the connector. Please note that the rated current does not change according to the voltage.
Note 2: Rather than the size of the contact or shell, rated voltage changes by arrangement of contacts.
Note 3: In some items, rated voltage diverges by each contact even when within the same connector.
Note 4: Properties will vary depending on the test category.

About Change in Mis-insertion Prevention Key Position (Angle)

Straight Connector

Outline Drawing

Shell Size	Coupling Screw A Screw	Size (mm)
Shell Size	Coupling Screw A Screw	Cable Entry φB ±0.3	Effective Screw Length J ±0.3	Total Length L or less	Outer Diameter Q ±0.8	Conduit Screw V Screw	Screw Length W or more
10SL	5/8-24UNEF-2B	9.6	13.49	34.9	22.22	5/8-24UNEF-2A	9.53
12S	3/4-20UNEF-2B	9.6	13.5	42.8	25.4	5/8-24UNEF-2A	9.5
14S	7/8-20UNEF-2B	12.5	13.5	42.8	28.6	3/4-20UNEF-2A	9.5
16S	1-20UNEF-2B	15.6	13.5	42.8	31.8	7/8-20UNEF-2A	9.5
16	1-20UNEF-2B	15.6	18.3	52.4	31.8	7/8-20UNEF-2A	9.5
18	1-1/8-18UNEF-2B	20.2	18.3	52.4	34.1	1-20UNEF-2A	9.5
20	1-1/4-18UNEF-2B	23.0	18.3	55.6	37.3	1-3/16-18UNEF-2A	9.5
22	1-3/8-18UNEF-2B	23.2	18.3	55.6	40.5	1-3/16-18UNEF-2A	9.5
24	1-1/2-18UNEF-2B	29.5	18.3	58.7	43.7	1-7/16-18UNEF-2A	9.5
28	1-3/4-18UNS-2B	29.8	18.3	58.7	50.0	1-7/16-18UNEF-2A	9.5
32	2-18UNS-2B	37.5	18.3	61.9	56.4	1-3/4-18UNS-2A	11.1
36	2-1/4-16UN-2B	43.8	18.3	61.9	62.7	2-18UNS-2A	12.7
48	3-16UN-2B	69.1	18.3	65.1	81.8	3-16UN-2A	15.9

Angled Connector

Outline Drawing

Shell Size	Coupling Screw A Screw	Size (mm)
Shell Size	Coupling Screw A Screw	Cable Entry B ±0.3	Effective Screw Length J ±0.3	Total Length L or less	M ±0.8	Outer Diameter Q ±0.8	U ±0.8	Conduit Screw V Screw	Screw Length W or more
12S	3/4-20UNEF-2B	9.6	13.5	50.8	41.7	25.4	25.4	5/8-24UNEF-2A	9.5
14S	7/8-20UNEF-2B	12.5	13.5	54.0	43.3	28.6	27.0	3/4-20UNEF-2A	9.5
16S	1-20UNEF-2B	15.6	13.5	60.3	48.0	31.8	28.6	7/8-20UNEF-2A	9.5
16	1-20UNEF-2B	15.6	18.3	65.1	52.8	31.8	28.6	7/8-20UNEF-2A	9.5
18	1-1/8-18UNEF-2B	18.6	18.3	68.3	54.4	34.1	32.1	1-20UNEF-2A	9.5
20	1-1/4-18UNEF-2B	23.0	18.3	77.0	60.7	37.3	33.7	1-3/16-18UNEF-2A	9.5
22	1-3/8-18UNEF-2B	23.2	18.3	77.0	60.7	40.5	33.3	1-3/16-18UNEF-2A	9.5
24	1-1/2-18UNEF-2B	28.0	18.3	86.5	67.1	43.7	34.9	1-7/16-18UNEF-2A	9.5
28	1-3/4-18UNS-2B	28.2	18.3	86.5	67.1	50.0	38.5	1-7/16-18UNEF-2A	9.5
32, 32A	2-18UNS-2B	35.9	18.3	95.2	71.8	56.4	46.4	1-3/4-18UNS-2A	11.1
36	2-1/4-16UN-2B	42.2	18.3	100.0	73.4	62.7	51.2	2-18UNS-2A	12.7
48	3-16UN-2B	65.9	18.3	125.4	86.5	81.8	59.1	3-16UN-2A	15.9

Relay Connector

Outline Drawing

Shell Size	Coupling Screw A Screw	Size (mm)
Shell Size	Coupling Screw A Screw	Effective Screw Length B or More	Total Length L or less	Length to Flange M +0.4 -0	Outer Diameter N or Less	Conduit Screw V Screw	Screw Length W or more
12S	3/4-20UNEF-2A	9.5	42.88	14.3	26.97	5/8-24UNEF-2A	25.4
14S	7/8-20UNEF-2A	9.5	42.88	14.3	29.36	3/4-20UNEF-2A	27.0
16S	1-20UNEF-2A	9.5	42.88	14.3	31.75	7/8-20UNEF-2A	28.6
16	1-20UNEF-2A	15.9	52.37	19.0	31.75	7/8-20UNEF-2A	28.6
18	1-1/8-18UNEF-2A	15.9	52.37	19.0	34.14	1-20UNEF-2A	32.1
20	1-1/4-18UNEF-2A	15.9	55.58	19.0	37.31	1-3/16-18UNEF-2A	33.7
22	1-3/8-18UNEF-2A	15.9	55.58	19.0	40.49	1-3/16-18UNEF-2A	33.3
24	1-1/2-18UNEF-2A	15.9	58.72	19.0	43.66	1-7/16-18UNEF-2A	34.9
28	1-3/4-18UNS-2A	15.9	58.72	19.0	50.01	1-7/16-18UNEF-2A	38.5
32, 32A	2-18UNS-2A	15.9	61.93	19.0	56.36	1-3/4UNS-2A	46.4
36	2-1/4-16UN-2A	15.9	61.93	19.0	62.71	2-18UNS-2A	51.2
48	3-16UN-2A	15.9	65.07	15.9	81.76	3-16UN-2A	59.1

Panel Mount

Outline Drawing

Shell Size	A Screw	Size (mm)
Shell Size	A Screw	B or more	K or less	L or less	M +0.79 -0	φN +0 -4.78	R ±0.13	S ±0.79	φT +0.25 -0.13
10SL	5/8-24UNEF-2A	9.53	2.1	21.9	14.28	15.9	18.26	25.4	3.05
12S	3/4-20UNEF-2A	9.52	2.4	24.3	14.27	19.86	20.62	27.79	3.05
14S	7/8-20UNEF-2A	9.52	2.4	24.3	14.27	23.01	23.01	30.18	3.05
16S	1-20UNEF-2A	9.52	2.4	24.3	14.27	24.61	24.61	32.54	3.05
16	1-20UNEF-2A	15.88	2.4	29.1	19.05	24.61	24.61	32.54	3.05
18	1-1/8-18UNEF-2A	15.88	3.0	28.6	19.05	26.97	26.97	34.92	3.05
20	1-1/4-18UNEF-2A	15.88	3.0	29.4	19.05	29.36	29.36	38.10	3.05
22	1-3/8-18UNEF-2A	15.88	3.0	29.4	19.05	31.75	31.75	41.28	3.05
24	1-1/2-18UNEF-2A	15.88	3.0	33.4	20.62	34.92	34.92	44.45	3.73
28	1-3/4-18UNS-2A	15.88	3.0	33.4	20.62	39.67	39.67	50.80	3.73
32, 32A	2-18UNS-2A	15.88	4.3	33.4	22.22	44.45	44.45	57.15	4.39
36	2-1/4-16UN-2A	15.88	4.3	33.4	22.22	49.23	49.23	63.50	4.39
48	3-16UN-2A	15.88	4.3	34.2	22.22	66.68	66.68	82.55	4.39

Current Capacity of Entire Connector

Rated current value per 1 contact varies depending on the size of the contact, but the current capacity that can flow safely through the connector varies depending on the total number of cores. The calculation method for 14-core or less and 15-core or more is different, so they are described separately.

(1) For 14-core or less

The rated current value per 1 contact at the time of connector incorporation is multiplied by the number of cores and then multiplied by the reduction factor in the figure below. The result is the allowable current of the entire connector.

■ Current Reduction Factor Table by Number of Cores

Total Number of Cores	1	2	3	4	5	6	7	8	9	10	11	12	13	14
Reduction Factor (%)	1	0.943	0.886	0.829	0.771	0.714	0.657	0.6	0.543	0.486	0.429	0.371	0.314	0.257

Example 1: For connectors with all contacts of the same size
Rated Current Value per 1 Contact x Number of Cores x Reduction Factor = Allowable Current of Entire Connector
13 A x 2 cores x 0.943 = 24.518 A
(When Arrangement Number is 12S-3)
Therefore, 24.518 A can be used for the entire connector.

Example 2: For connectors with contacts of different sizes
(Contact A Rated Current x Contact A Number of Cores + Contact B Rated Current x Contact B Number of Cores) x Reduction Factor (for the total number of cores) = Allowable Current of Entire Connector
(23 A x 2 cores + 13 A x 7 cores) x 0.543 = 74.391 A
(When Arrangement Number is 20-16)
Therefore, 74.391 A can be used for the entire connector.

(2) 15-core or more

The rated current value per 1 contact is multiplied by the number of cores and 20% of that value is the allowable current of the entire connector.

Example 1: For connectors with all contacts of the same size
Rated Current Value x Number of Cores x 20% = Allowable Current of Entire Connector
13 A x 17 cores x 0.2 = 44.2 A
(When Arrangement Number is 20-29)
Therefore, 44.2 A can be used for the entire connector.

Example 2: For connectors with contacts of different sizes
(Contact A Rated Current x Contact A Number of Cores + Contact B Rated Current x Contact B Number of Cores) x 20% = Allowable Current of Entire Connector
(23 A x 4 cores + 13 A x 18 cores) x 0.2 = 65.2 A
(When Arrangement Number is 28-11)
Therefore, 65.2 A can be used for the entire connector.

Soldering Method

Basic Information

Connector Shape	Circular Type	Connector series initials	M・N・O	M·N·O	MS
Application	Cable-to-panel mount	Wire connection method	Solder	Connection direction	Straight
Protection function (environmentally resistant)	None	Other standards (MIL)	○	Connector type	Panel Mount Type
Removal method	Others

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Search by Category / Brand

Search by Category

How can we improve?