Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(108 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

E-KFQNDAB3-P[3.5-6/0.01]-L[0-6/1]-B[2-10/0.1]

Specification/Dimensions

Insertion Guide Tip Shape
- Round
- Diamond
- Square Head
Clear
Surface Treatment
- Not Provided
- Hard Chrome Plating
  - Hard Chrome Plating
- Buffed
- Hard Chrome Plating + Buffed
Clear
Heat Treatment
- Not Provided
- Directly Quenching
Clear
Steel Type
- SKS3
  - Alloy tool steel
Clear
Type of Stainless Steel
- SUS304
  - SUS304 Equivalent
- SUS440C
  - Equivalent SUS440C
Clear
Locating Side Outer Dia. P (Ø)(mm)
[3.5-30/0.01mm Unit(s)]
Clear
Mounting Side Outer Dia. D(mm)
3

4

5

6

8

10

12

16

20
Clear
Mounting Section Length L(mm)
2

3

5

8

10
Clear
Locating Section Length B(mm)
5

6

8

10

15
Clear
Thread Length ML(mm)
4.5

6

7.5

9

12

15

18

24

30
Clear
Dimension Configurable Type
- P configurable
- P, L, B configurable
- P, L, B, ML configurable
Clear
Application
- Standard Shape
Clear
Shouldered
- Not Provided
Clear
Mounting Side Tolerance
0/-0.005

+0.005/0

g6

m6

p6

g7

h7
Clear
Mounting Part Length L(mm)
[0-20/1mm Unit(s)]
Clear
Positioning Part Length B(mm)
[2-20/0.1mm Unit(s)]
Clear
type
- E-CFPQNA
- E-CFPQND
- E-CFPQNLA
- E-CFPQNLD
- E-CJPQNA
- E-CJPQND
- E-FPQNA
- E-FPQND
- E-FPQNLA
- E-FPQNLD
- E-GFPQNA
- E-GFPQND
- E-GFPQNLA
- E-GFPQNLD
- E-GJPQNA
- E-HFPQNA
- E-HJPQNA
- E-JPQNA
- E-JPQND
- E-KFQNDAA
- E-KFQNDAB
- E-KFQNDAG
- E-KFQNDAH
- E-KFQNDAM
- E-KFQNDAP
- E-KFQNDAS
- E-KFQNDBA
- E-KFQNDBB
- E-KFQNDBG
- E-KFQNDBH
- E-KFQNDBM
- E-KFQNDBP
- E-KFQNDBS
- E-KFQNDGA
- E-KFQNDGB
- E-KFQNDGG
- E-KFQNDGH
- E-KFQNDGM
- E-KFQNDGP
- E-KFQNDGS
- E-KFQNDHA
- E-KFQNDHB
- E-KFQNDHG
- E-KFQNDHH
- E-KFQNDHM
- E-KFQNDHP
- E-KFQNDHS
- E-KFQNDMA
- E-KFQNDMB
- E-KFQNDMG
- E-KFQNDMH
- E-KFQNDMM
- E-KFQNDMP
- E-KFQNDMS
- E-KFQNDPA
- E-KFQNDPB
- E-KFQNDPG
- E-KFQNDPH
- E-KFQNDPM
- E-KFQNDPP
- E-KFQNDPS
- E-MCFPQNA
- E-MCFPQND
- E-MCFPQNLA
- E-MCFPQNLD
- E-MCJPQNA
- E-MCJPQND
- E-MFPQNA
- E-MFPQND
- E-MFPQNLA
- E-MFPQNLD
- E-MGFPQNA
- E-MGFPQND
- E-MGFPQNLA
- E-MGFPQNLD
- E-MGJPQNA
- E-MGJPQND
- E-MJPQNA
- E-MJPQND
- E-SFPQNA
- E-SFPQND
- E-SFPQNLA
- E-SFPQNLD
- E-SJPQNA
- E-SJPQND
- E-SKFQNDAA
- E-SKFQNDAB
- E-SKFQNDAG
- E-SKFQNDAH
- E-SKFQNDAM
- E-SKFQNDAP
- E-SKFQNDAS
- E-SKFQNDBA
- E-SKFQNDBB
- E-SKFQNDBG
- E-SKFQNDBH
- E-SKFQNDBM
- E-SKFQNDBP
- E-SKFQNDBS
- E-SKFQNDGA
- E-SKFQNDGB
- E-SKFQNDGG
- E-SKFQNDGH
- E-SKFQNDGM
- E-SKFQNDGP
- E-SKFQNDGS
- E-SKFQNDHA
- E-SKFQNDHB
- E-SKFQNDHG
- E-SKFQNDHH
- E-SKFQNDHM
- E-SKFQNDHP
- E-SKFQNDHS
- E-SKFQNDMA
- E-SKFQNDMB
- E-SKFQNDMG
- E-SKFQNDMH
- E-SKFQNDMM
- E-SKFQNDMP
- E-SKFQNDMS
- E-SKFQNDPA
- E-SKFQNDPB
- E-SKFQNDPG
- E-SKFQNDPH
- E-SKFQNDPM
- E-SKFQNDPP
- E-SKFQNDPS
Clear
Locating Side O.D. Tolerance
p6

m6

h7

g6

0/-0.01

0.005/0

0/-0.005

0/-0.02
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

6 Day(s) or Less
Clear

Specify Alterations

Locating Pins Large Head, Spherical, Threaded

Name: Locating Pins Large Head, Spherical, Threaded
Brand: MISUMI
Availability: PreOrder

Brand :

MISUMI

MiSUMi Economy

MISUMI

Part Number :

E-KFQNDAB3-P[3.5-6/0.01]-L[0-6/1]-B[2-10/0.1]

E-KFQNDAB4-P[4.5-7/0.01]-L[0-8/1]-B[2-10/0.1]

E-KFQNDAB5-P[5.5-8/0.01]-L[0-10/1]-B[2-10/0.1]

E-KFQNDAB6-P[6.5-10/0.01]-L[0-10/1]-B[2-12/0.1]

E-KFQNDAB8-P[9-13/0.01]-L[0-10/1]-B[2-15/0.1]

E-KFQNDAB10-P[11-15/0.01]-L[0-15/1]-B[3-20/0.1]

E-KFQNDAB12-P[13-18/0.01]-L[0-15/1]-B[3-20/0.1]

E-KFQNDAB16-P[17-25/0.01]-L[0-20/1]-B[5-20/0.1]

E-KFQNDAB20-P[22-30/0.01]-L[0-20/1]-B[5-20/0.1]

E-KFQNDBB3-P[3.5-6/0.01]-L[0-6/1]-B[2-10/0.1]

E-KFQNDBB4-P[4.5-7/0.01]-L[0-8/1]-B[2-10/0.1]

E-KFQNDBB5-P[5.5-8/0.01]-L[0-10/1]-B[2-10/0.1]

E-KFQNDBB6-P[6.5-10/0.01]-L[0-10/1]-B[2-12/0.1]

E-KFQNDBB8-P[9-13/0.01]-L[0-10/1]-B[2-15/0.1]

E-KFQNDBB10-P[11-15/0.01]-L[0-15/1]-B[3-20/0.1]

E-KFQNDBB12-P[13-18/0.01]-L[0-15/1]-B[3-20/0.1]

E-KFQNDBB16-P[17-25/0.01]-L[0-20/1]-B[5-20/0.1]

E-KFQNDBB20-P[22-30/0.01]-L[0-20/1]-B[5-20/0.1]

E-KFQNDGB3-P[3.5-6/0.01]-L[0-6/1]-B[2-10/0.1]

E-KFQNDGB4-P[4.5-7/0.01]-L[0-8/1]-B[2-10/0.1]

E-KFQNDAB3-P[3.5-6/0.01]-L[0-6/1]-B[2-10/0.1]

Order Qty :
Price :

---
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

Product Overview

The locating pin is used for the spatial positioning in the directions of X and Y axes, mainly using the workpiece hole as the positioning benchmark or used in conjunction with bushings, in which the large head spherical threaded type is easy to install, enables smooth insertion, and used widely.

Dimensional Drawing

Specifications Overview

■Material Specification Table

Material No.	Material	Surface Treatment	Hardness	Type				Shape Code
Material No.	Material	Surface Treatment	Hardness	P Dimension Fixed	P Dimension Configurable	P/L/B Dimension Configurable	P/L/B/ML Dimension Configurable	P Dimension Fixed	Other than P Dimension Fixed
①	Alloy tool steel or bearing steel	-	Quenching hardness 60～63HRC	E-JPQN	E-JPQN	E-FPQN	E-FPQNL	BB(Round)	A(Round) D(Diamond)
②	Alloy tool steel or bearing steel	Hard Chrome Plated	Quenching hardness 50～55HRC	-	E-GJPQN	E-GFPQN	E-GFPQNL
③	Austenitic stainless steel	-	-	E-SJPQN	E-SJPQN	E-SFPQN	E-SFPQNL
④	Austenitic stainless steel	Hard Chrome Plated	-	-	E-HJPQN	E-HFPQN	-
⑤	Martensitic stainless steel	-	Quenching hardness 50～55HRC	E-CJPQN	E-CJPQN	E-CFPQN	E-CFPQNL
⑥	Alloy tool steel or bearing steel	Buffed	Quenching hardness 60～63HRC	-	E-MJPQN	E-MFPQN	E-MFPQNL
⑦	Alloy tool steel or bearing steel	Hard Chrome Plated + Buffed	Quenching hardness 60～63HRC	-	E-MGJPQN	E-MGFPQN	E-MGFPQNL
⑧	Martensitic stainless steel	Buffed	Quenching hardness 50～55HRC	-	E-MCJPQN	E-MCFPQN	E-MCFPQNL

Hard chrome plating: Plating hardness 750HV～

If there are requirements on rust prevention, give priority to the hard-chrome plated or austenitic stainless steel products.

Please understand that E-GJPQN, E-HJPQN and E-HFPQN series products are temporarily not available in the diamond shape.

Please visit MISUMI website for details of the models available for sale.

Specification Table

Part Number				P													L	L 1mm increments	B	B 0.1mm increments	M (Coarse Thread)	ML	ML 1mm increments	(W)
Type	Shape	D	D Dimension Tolerance g7	Fixed												Configurable 0.01mm increments	L	L 1mm increments	B	B 0.1mm increments	M (Coarse Thread)	ML	ML 1mm increments	(W)
P Dimension Fixed E-JPQN E-SJPQN E-CJPQN	BB (Round)	3	-0.003 -0.012	4	5	6										−	2	−	5	−	M3	4.5	−	−
		4	+0.024 +0.012		5	6	7										2		6		M4	6
		5				6	7	8									3		6		M5	7.5
		6					7	8	9	10							3		8		M6	9
		8	+0.030 +0.015						9	10	11	12	13				5		8		M8	12
		10	+0.030 +0.015								11	12	13	15			5		10		M10	15
		12	+0.036 +0.018											15	16		8		10		M12	18
P Dimension Configurable E-JPQN E-GJPQN E-SJPQN E-HJPQN E-CJPQN (Buffed) E-MJPQN E-MGJPQN E-MCJPQN	A (Round) D (Diamond)	3	-0.003 -0.012	−												3.50~6.00	2	−	5	−	M3	4.5	−	1.5
		4	+0.024 +0.012													4.50~7.00	2		6		M4	6		1.8
		5														5.50~8.00	3		6		M5	7.5		2.2
		6														6.50~10.00	3		8		M6	9		3.0
		8	+0.030 +0.015													9.00~13.00	5		8		M8	12		3.5
		10	+0.030 +0.015													11.00~15.00	5		10		M10	15		4.0
		12	+0.036 +0.018													13.00~18.00	8				M12	18		5.0
		16	+0.036 +0.018													17.00~25.00	8				M16	24		7.0
		20	+0.043 +0.022													22.00~30.00	10		15		M20	30		9.0
P/L/B Dimension Configurable E-FPQN E-GFPQN E-SFPQN E-HFPQN E-CFPQN (Buffed) E-MFPQN E-MGFPQN E-MCFPQN Applicable when D≥5	A (Round) D (Diamond)	3	-0.003 -0.012	−												3.50～ 8.00	−	0～ 6	−	2.0~10.0	M3	4.5	−	1.5
		4	+0.024 +0.012													4.50～ 8.00		0～ 8		2.0~10.0	M4	6		1.8
		5														5.50～ 8.00		0~10		2.0～15.0(10.0)	M5	7.5		2.2
		6														6.50~10.00		0~10		2.0~15.0	M6	9		3
		8	+0.030 +0.015													8.50~15.00		0~10		2.0～30.0(15.0)	M8	12		3.5
		10	+0.030 +0.015													11.00~17.00		0~15		3.0～30.0(25.0)	M10	15		4
		12	+0.036 +0.018													13.00～20.00(18.00)		0~15		3.0～30.0(25.0)	M12	18		5
		16	+0.036 +0.018													17.00~27.00		0~20		5.0~30.0	M16	24		7
		20	+0.043 +0.022													22.00~30.00		0~20		5.0~30.0	M20	30		9
P/L/B/ML Dimension Configurable E-FPQNL E-GFPQNL E-SFPQNL E-CFPQNL (Buffed) E-MFPQNL E-MGFPQNL E-MCFPQNL Applicable when D≥5	A (Round) D (Diamond)	3	-0.003 -0.012	-												3.50～ 8.00	−	0～ 6	−	2.0~10.0	M3	−	3～ 9	1.5
		4	+0.024 +0.012													4.50～ 8.00		0～ 8		2.0~10.0	M4		4~12	1.8
		5														5.50～ 8.00		0~10		2.0～15.0(10.0)	M5		5~15	2.2
		6														6.50~10.00		0~10		2.0~15.0	M6		6~18	3
		8	+0.030 +0.015													8.50~15.00		0~10		2.0～30.0(15.0)	M8		8~24	3.5
		10	+0.030 +0.015													11.00~17.00		0~15		3.0～30.0(25.0)	M10		10~30	4
		12	+0.036 +0.018													13.00～20.00(18.00)		0~15		3.0～30.0(25.0)	M12		12~30	5
		16	+0.036 +0.018													17.00~27.00		0~20		5.0~30.0	M16		16~40	7
		20	+0.043 +0.022													22.00~30.00		0~20		5.0~30.0	M20		20~40	9

P, L or B dimension in ( ) applies to Diamond Shape.

The incomplete threaded section exists when L=0.
* The tightening torque (reference value) is the strength class (8.8) in the technical data, and the tightening state lasts for more than 24 hours. Not applicable when using locking agents or spring washers.

P/L/B/ML configurable: The length of threaded section (ML) can be specified within the range of M×1～M×3 (max.).

Please understand that E-GJPQN, E-HJPQN and E-HFPQN series products are temporarily not available in the diamond shape.

Product Features

Feature 1: Standard type with spherical lead-in part. Thread mounting type, rod diameter tolerance: g7.
Feature 2: The head is available in round and diamond types. The fixed type is cheap, and the freely specified type is rich in specifications.
Feature 3: Optional material: iron (alloy tool steel or bearing steel); austenitic stainless steel, martensitic stainless steel, suitable for positioning of various workpieces.
Feature 4: Hard chrome plated and austenitic stainless steel series can effectively prevent rusting of products.

Precautions

①Dimensional tolerance and fit parameter table For details, click

here
②Reference table for common dimensions without indicated tolerance (medium accuracy m) For details, click

here
③Reference value for thread mounting torque The tightening torque (reference value) is the strength class (8.8) in the technical data

here, and the tightening state lasts for more than 24 hours. Not applicable when using locking agents or spring washers.

Example of Use

Example introduction: Round and diamond types combined for positioning
①The combination of round and diamond types in the fixture enables more accurate positioning in A direction and reduction of the mating hole pitch error in B direction.
②Of the 2 locating pins, the cylindrical shape is taken as reference for 1 locating pin, and the cut-flat position on the round shape (diamond type) in the direction of the center distance of the two holes is taken as reference for the other, which enables mounting/dismounting operations and ensures positioning accuracy.
③Taking advantage of the different heights of the 2 locating pins, insert the tall pin for pre-positioning and then the short pin for precise positioning.

Application Industries

Lithium battery	Semiconductor	Medical

Smart Phones	Electronic & Electrical	Robotics

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 45; 60

Part Number
E-KFQNDAB3-P[3.5-6/0.01]-L[0-6/1]-B[2-10/0.1]
E-KFQNDAB4-P[4.5-7/0.01]-L[0-8/1]-B[2-10/0.1]
E-KFQNDAB5-P[5.5-8/0.01]-L[0-10/1]-B[2-10/0.1]
E-KFQNDAB6-P[6.5-10/0.01]-L[0-10/1]-B[2-12/0.1]
E-KFQNDAB8-P[9-13/0.01]-L[0-10/1]-B[2-15/0.1]
E-KFQNDAB10-P[11-15/0.01]-L[0-15/1]-B[3-20/0.1]
E-KFQNDAB12-P[13-18/0.01]-L[0-15/1]-B[3-20/0.1]
E-KFQNDAB16-P[17-25/0.01]-L[0-20/1]-B[5-20/0.1]
E-KFQNDAB20-P[22-30/0.01]-L[0-20/1]-B[5-20/0.1]
E-KFQNDBB3-P[3.5-6/0.01]-L[0-6/1]-B[2-10/0.1]
E-KFQNDBB4-P[4.5-7/0.01]-L[0-8/1]-B[2-10/0.1]
E-KFQNDBB5-P[5.5-8/0.01]-L[0-10/1]-B[2-10/0.1]
E-KFQNDBB6-P[6.5-10/0.01]-L[0-10/1]-B[2-12/0.1]
E-KFQNDBB8-P[9-13/0.01]-L[0-10/1]-B[2-15/0.1]
E-KFQNDBB10-P[11-15/0.01]-L[0-15/1]-B[3-20/0.1]
E-KFQNDBB12-P[13-18/0.01]-L[0-15/1]-B[3-20/0.1]
E-KFQNDBB16-P[17-25/0.01]-L[0-20/1]-B[5-20/0.1]
E-KFQNDBB20-P[22-30/0.01]-L[0-20/1]-B[5-20/0.1]
E-KFQNDGB3-P[3.5-6/0.01]-L[0-6/1]-B[2-10/0.1]
E-KFQNDGB4-P[4.5-7/0.01]-L[0-8/1]-B[2-10/0.1]
E-KFQNDGB5-P[5.5-8/0.01]-L[0-10/1]-B[2-10/0.1]
E-KFQNDGB6-P[6.5-10/0.01]-L[0-10/1]-B[2-12/0.1]
E-KFQNDGB8-P[9-13/0.01]-L[0-10/1]-B[2-15/0.1]
E-KFQNDGB10-P[11-15/0.01]-L[0-15/1]-B[3-20/0.1]
E-KFQNDGB12-P[13-18/0.01]-L[0-15/1]-B[3-20/0.1]
E-KFQNDGB16-P[17-25/0.01]-L[0-20/1]-B[5-20/0.1]
E-KFQNDGB20-P[22-30/0.01]-L[0-20/1]-B[5-20/0.1]
E-KFQNDHB3-P[3.5-6/0.01]-L[0-6/1]-B[2-10/0.1]
E-KFQNDHB4-P[4.5-7/0.01]-L[0-8/1]-B[2-10/0.1]
E-KFQNDHB5-P[5.5-8/0.01]-L[0-10/1]-B[2-10/0.1]
E-KFQNDHB6-P[6.5-10/0.01]-L[0-10/1]-B[2-12/0.1]
E-KFQNDHB8-P[9-13/0.01]-L[0-10/1]-B[2-15/0.1]
E-KFQNDHB10-P[11-15/0.01]-L[0-15/1]-B[3-20/0.1]
E-KFQNDHB12-P[13-18/0.01]-L[0-15/1]-B[3-20/0.1]
E-KFQNDHB16-P[17-25/0.01]-L[0-20/1]-B[5-20/0.1]
E-KFQNDHB20-P[22-30/0.01]-L[0-20/1]-B[5-20/0.1]
E-KFQNDMB3-P[3.5-6/0.01]-L[0-6/1]-B[2-10/0.1]
E-KFQNDMB4-P[4.5-7/0.01]-L[0-8/1]-B[2-10/0.1]
E-KFQNDMB5-P[5.5-8/0.01]-L[0-10/1]-B[2-10/0.1]
E-KFQNDMB6-P[6.5-10/0.01]-L[0-10/1]-B[2-12/0.1]
E-KFQNDMB8-P[9-13/0.01]-L[0-10/1]-B[2-15/0.1]
E-KFQNDMB10-P[11-15/0.01]-L[0-15/1]-B[3-20/0.1]
E-KFQNDMB12-P[13-18/0.01]-L[0-15/1]-B[3-20/0.1]
E-KFQNDMB16-P[17-25/0.01]-L[0-20/1]-B[5-20/0.1]
E-KFQNDMB20-P[22-30/0.01]-L[0-20/1]-B[5-20/0.1]
E-KFQNDPB3-P[3.5-6/0.01]-L[0-6/1]-B[2-10/0.1]
E-KFQNDPB4-P[4.5-7/0.01]-L[0-8/1]-B[2-10/0.1]
E-KFQNDPB5-P[5.5-8/0.01]-L[0-10/1]-B[2-10/0.1]
E-KFQNDPB6-P[6.5-10/0.01]-L[0-10/1]-B[2-12/0.1]
E-KFQNDPB8-P[9-13/0.01]-L[0-10/1]-B[2-15/0.1]
E-KFQNDPB10-P[11-15/0.01]-L[0-15/1]-B[3-20/0.1]
E-KFQNDPB12-P[13-18/0.01]-L[0-15/1]-B[3-20/0.1]
E-KFQNDPB16-P[17-25/0.01]-L[0-20/1]-B[5-20/0.1]
E-KFQNDPB20-P[22-30/0.01]-L[0-20/1]-B[5-20/0.1]
E-SKFQNDAB3-P[3.5-6/0.01]-L[0-6/1]-B[2-10/0.1]
E-SKFQNDAB4-P[4.5-7/0.01]-L[0-8/1]-B[2-10/0.1]
E-SKFQNDAB5-P[5.5-8/0.01]-L[0-10/1]-B[2-10/0.1]
E-SKFQNDAB6-P[6.5-10/0.01]-L[0-10/1]-B[2-12/0.1]
E-SKFQNDAB8-P[9-13/0.01]-L[0-10/1]-B[2-15/0.1]
E-SKFQNDAB10-P[11-15/0.01]-L[0-15/1]-B[3-20/0.1]

Price	Minimum Order Qty.	Days to Ship	RoHS	Insertion Guide Tip Shape	Surface Treatment	Heat Treatment	Steel Type	Type of Stainless Steel	Locating Side Outer Dia. P (Ø) (mm)	Locating Side O.D. Tolerance	Mounting Side Outer Dia. D (mm)	Mounting Section Length L (mm)	Locating Section Length B (mm)	Thread Length ML (mm)	Dimension Configurable Type	Application	Shouldered	Mounting Side Tolerance	Mounting Part Length L (mm)	Positioning Part Length B (mm)
-	1 Piece(s)	6 Day(s)	10	Square Head	Not Provided	Directly Quenching	[SKS3] Alloy tool steel	-	3.5 ～ 6	0/-0.005	3	-	-	-	P, L, B configurable	-	-	+0.005/0	0 ～ 6	2 ～ 10
-	1 Piece(s)	6 Day(s)	10	Square Head	Not Provided	Directly Quenching	[SKS3] Alloy tool steel	-	4.5 ～ 7	0/-0.005	4	-	-	-	P, L, B configurable	-	-	+0.005/0	0 ～ 8	2 ～ 10
-	1 Piece(s)	6 Day(s)	10	Square Head	Not Provided	Directly Quenching	[SKS3] Alloy tool steel	-	5.5 ～ 8	0/-0.005	5	-	-	-	P, L, B configurable	-	-	+0.005/0	0 ～ 10	2 ～ 10
-	1 Piece(s)	6 Day(s)	10	Square Head	Not Provided	Directly Quenching	[SKS3] Alloy tool steel	-	6.5 ～ 10	0/-0.005	6	-	-	-	P, L, B configurable	-	-	+0.005/0	0 ～ 10	2 ～ 12
-	1 Piece(s)	6 Day(s)	10	Square Head	Not Provided	Directly Quenching	[SKS3] Alloy tool steel	-	9 ～ 13	0/-0.005	8	-	-	-	P, L, B configurable	-	-	+0.005/0	0 ～ 10	2 ～ 15
-	1 Piece(s)	6 Day(s)	10	Square Head	Not Provided	Directly Quenching	[SKS3] Alloy tool steel	-	11 ～ 15	0/-0.005	10	-	-	-	P, L, B configurable	-	-	+0.005/0	0 ～ 15	3 ～ 20
-	1 Piece(s)	6 Day(s)	10	Square Head	Not Provided	Directly Quenching	[SKS3] Alloy tool steel	-	13 ～ 18	0/-0.005	12	-	-	-	P, L, B configurable	-	-	+0.005/0	0 ～ 15	3 ～ 20
-	1 Piece(s)	6 Day(s)	10	Square Head	Not Provided	Directly Quenching	[SKS3] Alloy tool steel	-	17 ～ 25	0/-0.005	16	-	-	-	P, L, B configurable	-	-	+0.005/0	0 ～ 20	5 ～ 20
-	1 Piece(s)	6 Day(s)	10	Square Head	Not Provided	Directly Quenching	[SKS3] Alloy tool steel	-	22 ～ 30	0/-0.005	20	-	-	-	P, L, B configurable	-	-	+0.005/0	0 ～ 20	5 ～ 20
-	1 Piece(s)	6 Day(s)	10	Square Head	Not Provided	Directly Quenching	[SKS3] Alloy tool steel	-	3.5 ～ 6	0/-0.005	3	-	-	-	P, L, B configurable	-	-	0/-0.005	0 ～ 6	2 ～ 10
-	1 Piece(s)	6 Day(s)	10	Square Head	Not Provided	Directly Quenching	[SKS3] Alloy tool steel	-	4.5 ～ 7	0/-0.005	4	-	-	-	P, L, B configurable	-	-	0/-0.005	0 ～ 8	2 ～ 10
-	1 Piece(s)	6 Day(s)	10	Square Head	Not Provided	Directly Quenching	[SKS3] Alloy tool steel	-	5.5 ～ 8	0/-0.005	5	-	-	-	P, L, B configurable	-	-	0/-0.005	0 ～ 10	2 ～ 10
-	1 Piece(s)	6 Day(s)	10	Square Head	Not Provided	Directly Quenching	[SKS3] Alloy tool steel	-	6.5 ～ 10	0/-0.005	6	-	-	-	P, L, B configurable	-	-	0/-0.005	0 ～ 10	2 ～ 12
-	1 Piece(s)	6 Day(s)	10	Square Head	Not Provided	Directly Quenching	[SKS3] Alloy tool steel	-	9 ～ 13	0/-0.005	8	-	-	-	P, L, B configurable	-	-	0/-0.005	0 ～ 10	2 ～ 15
-	1 Piece(s)	6 Day(s)	10	Square Head	Not Provided	Directly Quenching	[SKS3] Alloy tool steel	-	11 ～ 15	0/-0.005	10	-	-	-	P, L, B configurable	-	-	0/-0.005	0 ～ 15	3 ～ 20
-	1 Piece(s)	6 Day(s)	10	Square Head	Not Provided	Directly Quenching	[SKS3] Alloy tool steel	-	13 ～ 18	0/-0.005	12	-	-	-	P, L, B configurable	-	-	0/-0.005	0 ～ 15	3 ～ 20
-	1 Piece(s)	6 Day(s)	10	Square Head	Not Provided	Directly Quenching	[SKS3] Alloy tool steel	-	17 ～ 25	0/-0.005	16	-	-	-	P, L, B configurable	-	-	0/-0.005	0 ～ 20	5 ～ 20
-	1 Piece(s)	6 Day(s)	10	Square Head	Not Provided	Directly Quenching	[SKS3] Alloy tool steel	-	22 ～ 30	0/-0.005	20	-	-	-	P, L, B configurable	-	-	0/-0.005	0 ～ 20	5 ～ 20
-	1 Piece(s)	6 Day(s)	10	Square Head	Not Provided	Directly Quenching	[SKS3] Alloy tool steel	-	3.5 ～ 6	0/-0.005	3	-	-	-	P, L, B configurable	-	-	g6	0 ～ 6	2 ～ 10
-	1 Piece(s)	6 Day(s)	10	Square Head	Not Provided	Directly Quenching	[SKS3] Alloy tool steel	-	4.5 ～ 7	0/-0.005	4	-	-	-	P, L, B configurable	-	-	g6	0 ～ 8	2 ～ 10
-	1 Piece(s)	6 Day(s)	10	Square Head	Not Provided	Directly Quenching	[SKS3] Alloy tool steel	-	5.5 ～ 8	0/-0.005	5	-	-	-	P, L, B configurable	-	-	g6	0 ～ 10	2 ～ 10
-	1 Piece(s)	6 Day(s)	10	Square Head	Not Provided	Directly Quenching	[SKS3] Alloy tool steel	-	6.5 ～ 10	0/-0.005	6	-	-	-	P, L, B configurable	-	-	g6	0 ～ 10	2 ～ 12
-	1 Piece(s)	6 Day(s)	10	Square Head	Not Provided	Directly Quenching	[SKS3] Alloy tool steel	-	9 ～ 13	0/-0.005	8	-	-	-	P, L, B configurable	-	-	g6	0 ～ 10	2 ～ 15
-	1 Piece(s)	6 Day(s)	10	Square Head	Not Provided	Directly Quenching	[SKS3] Alloy tool steel	-	11 ～ 15	0/-0.005	10	-	-	-	P, L, B configurable	-	-	g6	0 ～ 15	3 ～ 20
-	1 Piece(s)	6 Day(s)	10	Square Head	Not Provided	Directly Quenching	[SKS3] Alloy tool steel	-	13 ～ 18	0/-0.005	12	-	-	-	P, L, B configurable	-	-	g6	0 ～ 15	3 ～ 20
-	1 Piece(s)	6 Day(s)	10	Square Head	Not Provided	Directly Quenching	[SKS3] Alloy tool steel	-	17 ～ 25	0/-0.005	16	-	-	-	P, L, B configurable	-	-	g6	0 ～ 20	5 ～ 20
-	1 Piece(s)	6 Day(s)	10	Square Head	Not Provided	Directly Quenching	[SKS3] Alloy tool steel	-	22 ～ 30	0/-0.005	20	-	-	-	P, L, B configurable	-	-	g6	0 ～ 20	5 ～ 20
-	1 Piece(s)	6 Day(s)	10	Square Head	Not Provided	Directly Quenching	[SKS3] Alloy tool steel	-	3.5 ～ 6	0/-0.005	3	-	-	-	P, L, B configurable	-	-	h7	0 ～ 6	2 ～ 10
-	1 Piece(s)	6 Day(s)	10	Square Head	Not Provided	Directly Quenching	[SKS3] Alloy tool steel	-	4.5 ～ 7	0/-0.005	4	-	-	-	P, L, B configurable	-	-	h7	0 ～ 8	2 ～ 10
-	1 Piece(s)	6 Day(s)	10	Square Head	Not Provided	Directly Quenching	[SKS3] Alloy tool steel	-	5.5 ～ 8	0/-0.005	5	-	-	-	P, L, B configurable	-	-	h7	0 ～ 10	2 ～ 10
-	1 Piece(s)	6 Day(s)	10	Square Head	Not Provided	Directly Quenching	[SKS3] Alloy tool steel	-	6.5 ～ 10	0/-0.005	6	-	-	-	P, L, B configurable	-	-	h7	0 ～ 10	2 ～ 12
-	1 Piece(s)	6 Day(s)	10	Square Head	Not Provided	Directly Quenching	[SKS3] Alloy tool steel	-	9 ～ 13	0/-0.005	8	-	-	-	P, L, B configurable	-	-	h7	0 ～ 10	2 ～ 15
-	1 Piece(s)	6 Day(s)	10	Square Head	Not Provided	Directly Quenching	[SKS3] Alloy tool steel	-	11 ～ 15	0/-0.005	10	-	-	-	P, L, B configurable	-	-	h7	0 ～ 15	3 ～ 20
-	1 Piece(s)	6 Day(s)	10	Square Head	Not Provided	Directly Quenching	[SKS3] Alloy tool steel	-	13 ～ 18	0/-0.005	12	-	-	-	P, L, B configurable	-	-	h7	0 ～ 15	3 ～ 20
-	1 Piece(s)	6 Day(s)	10	Square Head	Not Provided	Directly Quenching	[SKS3] Alloy tool steel	-	17 ～ 25	0/-0.005	16	-	-	-	P, L, B configurable	-	-	h7	0 ～ 20	5 ～ 20
-	1 Piece(s)	6 Day(s)	10	Square Head	Not Provided	Directly Quenching	[SKS3] Alloy tool steel	-	22 ～ 30	0/-0.005	20	-	-	-	P, L, B configurable	-	-	h7	0 ～ 20	5 ～ 20
-	1 Piece(s)	6 Day(s)	10	Square Head	Not Provided	Directly Quenching	[SKS3] Alloy tool steel	-	3.5 ～ 6	0/-0.005	3	-	-	-	P, L, B configurable	-	-	m6	0 ～ 6	2 ～ 10
-	1 Piece(s)	6 Day(s)	10	Square Head	Not Provided	Directly Quenching	[SKS3] Alloy tool steel	-	4.5 ～ 7	0/-0.005	4	-	-	-	P, L, B configurable	-	-	m6	0 ～ 8	2 ～ 10
-	1 Piece(s)	6 Day(s)	10	Square Head	Not Provided	Directly Quenching	[SKS3] Alloy tool steel	-	5.5 ～ 8	0/-0.005	5	-	-	-	P, L, B configurable	-	-	m6	0 ～ 10	2 ～ 10
-	1 Piece(s)	6 Day(s)	10	Square Head	Not Provided	Directly Quenching	[SKS3] Alloy tool steel	-	6.5 ～ 10	0/-0.005	6	-	-	-	P, L, B configurable	-	-	m6	0 ～ 10	2 ～ 12
-	1 Piece(s)	6 Day(s)	10	Square Head	Not Provided	Directly Quenching	[SKS3] Alloy tool steel	-	9 ～ 13	0/-0.005	8	-	-	-	P, L, B configurable	-	-	m6	0 ～ 10	2 ～ 15
-	1 Piece(s)	6 Day(s)	10	Square Head	Not Provided	Directly Quenching	[SKS3] Alloy tool steel	-	11 ～ 15	0/-0.005	10	-	-	-	P, L, B configurable	-	-	m6	0 ～ 15	3 ～ 20
-	1 Piece(s)	6 Day(s)	10	Square Head	Not Provided	Directly Quenching	[SKS3] Alloy tool steel	-	13 ～ 18	0/-0.005	12	-	-	-	P, L, B configurable	-	-	m6	0 ～ 15	3 ～ 20
-	1 Piece(s)	6 Day(s)	10	Square Head	Not Provided	Directly Quenching	[SKS3] Alloy tool steel	-	17 ～ 25	0/-0.005	16	-	-	-	P, L, B configurable	-	-	m6	0 ～ 20	5 ～ 20
-	1 Piece(s)	6 Day(s)	10	Square Head	Not Provided	Directly Quenching	[SKS3] Alloy tool steel	-	22 ～ 30	0/-0.005	20	-	-	-	P, L, B configurable	-	-	m6	0 ～ 20	5 ～ 20
-	1 Piece(s)	6 Day(s)	10	Square Head	Not Provided	Directly Quenching	[SKS3] Alloy tool steel	-	3.5 ～ 6	0/-0.005	3	-	-	-	P, L, B configurable	-	-	p6	0 ～ 6	2 ～ 10
-	1 Piece(s)	6 Day(s)	10	Square Head	Not Provided	Directly Quenching	[SKS3] Alloy tool steel	-	4.5 ～ 7	0/-0.005	4	-	-	-	P, L, B configurable	-	-	p6	0 ～ 8	2 ～ 10
-	1 Piece(s)	6 Day(s)	10	Square Head	Not Provided	Directly Quenching	[SKS3] Alloy tool steel	-	5.5 ～ 8	0/-0.005	5	-	-	-	P, L, B configurable	-	-	p6	0 ～ 10	2 ～ 10
-	1 Piece(s)	6 Day(s)	10	Square Head	Not Provided	Directly Quenching	[SKS3] Alloy tool steel	-	6.5 ～ 10	0/-0.005	6	-	-	-	P, L, B configurable	-	-	p6	0 ～ 10	2 ～ 12
-	1 Piece(s)	6 Day(s)	10	Square Head	Not Provided	Directly Quenching	[SKS3] Alloy tool steel	-	9 ～ 13	0/-0.005	8	-	-	-	P, L, B configurable	-	-	p6	0 ～ 10	2 ～ 15
-	1 Piece(s)	6 Day(s)	10	Square Head	Not Provided	Directly Quenching	[SKS3] Alloy tool steel	-	11 ～ 15	0/-0.005	10	-	-	-	P, L, B configurable	-	-	p6	0 ～ 15	3 ～ 20
-	1 Piece(s)	6 Day(s)	10	Square Head	Not Provided	Directly Quenching	[SKS3] Alloy tool steel	-	13 ～ 18	0/-0.005	12	-	-	-	P, L, B configurable	-	-	p6	0 ～ 15	3 ～ 20
-	1 Piece(s)	6 Day(s)	10	Square Head	Not Provided	Directly Quenching	[SKS3] Alloy tool steel	-	17 ～ 25	0/-0.005	16	-	-	-	P, L, B configurable	-	-	p6	0 ～ 20	5 ～ 20
-	1 Piece(s)	6 Day(s)	10	Square Head	Not Provided	Directly Quenching	[SKS3] Alloy tool steel	-	22 ～ 30	0/-0.005	20	-	-	-	P, L, B configurable	-	-	p6	0 ～ 20	5 ～ 20
-	1 Piece(s)	6 Day(s)	10	Square Head	Not Provided	-	-	[SUS304] SUS304 Equivalent	3.5 ～ 6	0/-0.005	3	-	-	-	P, L, B configurable	-	-	+0.005/0	0 ～ 6	2 ～ 10
-	1 Piece(s)	6 Day(s)	10	Square Head	Not Provided	-	-	[SUS304] SUS304 Equivalent	4.5 ～ 7	0/-0.005	4	-	-	-	P, L, B configurable	-	-	+0.005/0	0 ～ 8	2 ～ 10
-	1 Piece(s)	6 Day(s)	10	Square Head	Not Provided	-	-	[SUS304] SUS304 Equivalent	5.5 ～ 8	0/-0.005	5	-	-	-	P, L, B configurable	-	-	+0.005/0	0 ～ 10	2 ～ 10
-	1 Piece(s)	6 Day(s)	10	Square Head	Not Provided	-	-	[SUS304] SUS304 Equivalent	6.5 ～ 10	0/-0.005	6	-	-	-	P, L, B configurable	-	-	+0.005/0	0 ～ 10	2 ～ 12
-	1 Piece(s)	6 Day(s)	10	Square Head	Not Provided	-	-	[SUS304] SUS304 Equivalent	9 ～ 13	0/-0.005	8	-	-	-	P, L, B configurable	-	-	+0.005/0	0 ～ 10	2 ～ 15
-	1 Piece(s)	6 Day(s)	10	Square Head	Not Provided	-	-	[SUS304] SUS304 Equivalent	11 ～ 15	0/-0.005	10	-	-	-	P, L, B configurable	-	-	+0.005/0	0 ～ 15	3 ～ 20

Basic Information

Basic Shape	Large Head	Insertion Guide Tip Type	Spherical	Insertion Guide Specifications	Not Provided
Mounting Side Shape	Threaded

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Bushings for Locating Pins, Shouldered	Bushings for Locating Pins, Straight	Bushings for Locating Pins, Slotted Hole, Shouldered

Representative model: JBH6-8	Representative model: JBA3-8	Representative model: JBPE10-P6.8-W4.82-L15

Search by Category / Brand

Search by Category

How can we improve?