Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(160 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

E-LSBJ8-[15-250/0.5]-M[3,4]-N[3,4]

Material Wrench Flats B (or D) Surface Treatment Length L Type Pilot Dia. P, V Thread Diameter M Thread Diameter N Thread Length G H type Days to Ship

Specification/Dimensions

Material
- Steel
  - General structural steel or carbon steel
- Stainless Steel
  - Austenitic stainless steel
Clear
Wrench Flats B (or D)(mm)
8

10

12

13

14

17

19

24

27

30

32
Clear
Surface Treatment
- Not Provided
- Black Oxide
- Electroless Nickel Plating
Clear
Length L(mm)
[15-1000/0.5mm Unit(s)]
Clear
Type
- Both Ends Tapped Stepped Part Configurable
- Both Ends Tapped　 Stepped Part Selectable
Clear
Pilot Dia. P, V(φ)
- 6
- 8
- 10
- 12
- 16
- 20
- 24
- 28
- 30
Clear
Thread Diameter M(mm)
3

4

5

6

8

10

12

16

20
Clear
Thread Diameter N(mm)
3

4

5

6

8

10

12

16

20
Clear
Thread Length G(mm)
0
[2-20/1mm Unit(s)]
Clear
H(mm)
0
[2-20/1mm Unit(s)]
Clear
type
- E-LSBJ
- E-LSBJF
- E-NLSBJ
- E-NLSBJF
- E-PLSBJ
- E-PLSBJF
- E-SLSBJ
- E-SLSBJF
Clear

Days to Ship

All

9 Day(s) or Less
Clear

Specify Alterations

Hexagonal Posts, Both End Stepped, Both end Tapped, Length Configurable (Part Number)

Name: Hexagonal Posts, Both End Stepped, Both end Tapped, Length Configurable
Brand: MISUMI
Availability: PreOrder

Brand :

MISUMI

MiSUMi Economy

MISUMI

Part Number :

E-LSBJ8-[15-250/0.5]-M[3,4]-N[3,4]

E-LSBJ10-[15-350/0.5]-M[3,4,5]-N[3,4,5]

E-LSBJ12-[20-500/0.5]-M[4,5,6]-N[4,5,6]

E-LSBJ13-[20-500/0.5]-M[4,5,6]-N[4,5,6]

E-LSBJ14-[25-600/0.5]-M[5,6,8]-N[5,6,8]

E-LSBJ17-[25-600/0.5]-M[5,6,8]-N[5,6,8]

E-LSBJ19-[40-600/0.5]-M[5,6,8,10,12]-N[5,6,8,10,12]

E-LSBJ24-[50-700/0.5]-M[5,6,8,10,12,16]-N[5,6,8,10,12,16]

E-LSBJ27-[50-800/0.5]-M[5,6,8,10,12,16]-N[5,6,8,10,12,16]

E-LSBJ27W-[50-800/0.5]-M[5,6,8,10,12,16]-N[5,6,8,10,12,16]

E-LSBJ30-[60-1000/0.5]-M[5,6,8,10,12,16,20]-N[6,8,10,12,16,20]

E-LSBJ30W-[60-1000/0.5]-M[5,6,8,10,12,16,20]-N[6,8,10,12,16,20]

E-LSBJ32-[60-1000/0.5]-M[5,6,8,10,12,16,20]-N[6,8,10,12,16,20]

E-LSBJ32W-[60-1000/0.5]-M[5,6,8,10,12,16,20]-N[6,8,10,12,16,20]

E-LSBJF8-[15-250/0.5]-M[3,4]-N[3,4]-G[2-4/1]-H[2-4/1]

E-LSBJF10-[15-350/0.5]-M[3,4,5]-N[3,4,5]-G[2-5/1]-H[2-5/1]

E-LSBJF12-[20-500/0.5]-M[4,5,6]-N[4,5,6]-G[2-6/1]-H[2-6/1]

E-LSBJF13-[20-500/0.5]-M[4,5,6]-N[4,5,6]-G[2-6/1]-H[2-6/1]

E-LSBJF14-[25-600/0.5]-M[5,6,8]-N[5,6,8]-G[2-8/1]-H[2-8/1]

E-LSBJF17-[25-600/0.5]-M[5,6,8]-N[5,6,8]-G[2-8/1]-H[2-8/1]

E-LSBJ8-[15-250/0.5]-M[3,4]-N[3,4]

Order Qty :
Price :

---
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Data unavailable

Product Overview

Hex post is a common processing component, with the functions of connection, fastening, support, separation and so on, mainly used in various fastening and supporting mechanisms.
At the same time, there are a variety of materials to choose from, allowing it to be widely used in automation, electronics and electrical appliances, medical treatment, communication and other fields.

Dimensional Drawing

MISUMI Hexagonal Posts Imported From Japan, Embedded, Japanese Quality

Specifications Overview

Type		Material	Surface Treatment	B (mm)	L (mm)
Stepped Part Fixed	Stepped Part Configurable
E-NLSBJ	E-NLSBJF	General structural steel or carbon steel	-	8~32	15~1000
E-LSBJ	E-LSBJF		Ferroferric Oxide Protective Film
E-PLSBJ	E-PLSBJF		Electroless Nickel Plating
E-SLSBJ	E-SLSBJF	Austenitic stainless steel	-

If there are requirements for rust prevention, give priority to the products with surface treatment of electroless nickel plating and products made of austenitic stainless steel. Please click

Anti-Rust Method.

Taps may not have been surface treated internally.

Specification Table

Part Number			L 1mm increments	M (Coarse Thread) ·N (Coarse Thread) Selection									G 1mm increments	H 1mm increments	E	F	P	V	W	(C)
Type		B	L 1mm increments	M (Coarse Thread) ·N (Coarse Thread) Selection									G 1mm increments	H 1mm increments	E	F	P	V	W	(C)
Stepped Part Selectable General Structural Steel or Carbon Steel E-NLSBJ E-LSBJ E-PLSBJ Austenitic Stainless Steel E-SLSBJ	Stepped Part Selectable General Structural Steel or Carbon Steel E-NLSBJF E-LSBJF E-PLSBJF Austenitic Stainless Steel E-SLSBJF	8	15～250	3	4								2～ 4	2～ 4	4	4	6	6	1	9.2
		10	15～350	3	4	5							2～ 5	2～ 5	5	5	8	8	1	12
		12	20～500		4	5	6						2～ 6	2～ 6	6	6	10	10	1	14
		13	20～500		4	5	6						2～ 6	2～ 6	6	6	10	10	1.5	15
		14	25～600			5	6	8					2～ 8	2～ 8	8	8	12	12	1	16
		17	25～600			5	6	8					2～ 8	2～ 8	8	8	12	12	2.5	20
		19	40～600			5	6	8	10	12			2~10	2~10	10	10	16	16	1.5	22
		24	50～700			5	6	8	10	12	16		2~12	2~12	12	12	20	20	2	28
		27	50～800			5	6	8	10	12	16		2~16	2~16	16	16	24	24	1.5	31.2
		27W	50～800			5	6	8	10	12	16		2~16	2~16	16	16	20	20	3.5	31.2
		30	60~1000			5	6	8	10	12	16	20	2~16	2~16	16	16	28	28	1	34.6
		30W	60~1000			5	6	8	10	12	16	20	2~16	2~16	16	16	24	24	3	34.6
		32	60~1000			5	6	8	10	12	16	20	2~20	2~20	20	20	30	30	1	36.9
		32W	60~1000			5	6	8	10	12	16	20	2~20	2~20	20	20	24	24	4	36.9

L Dimension tolerances are as follows:
L 8-300 ±0.2
L300.5-600 ±0.3
L600.5-1000 ±0.4

Product Features

Feature 1: The length and thread of the hex post can be specified to accommodate different operating environments.
Feature 2: A variety of materials to choose from: general structural steel, stainless steel, aluminum, brass, resin, etc.
Feature 3: Products are made of materials (austenitic stainless steel) with good anti-rust performance and are widely used in precision equipment and dust-free environment.
Feature 4: With the main functions of connection, fastening, support and separation, it is often used in mechanisms with various frames as a connection and support component.
Feature 5: The hex post has many parts where a wrench can be used. Even in a narrow space, the wrench can be used for fastening. The wrench position can be shifted every 60 interval.
MISUMI Hexagonal Posts Embedded

Usage Method

Intended Use	Support and Fixation	Fastening and Connection	Separation
Usage Method Diagram
Feature	- It can bear large load in vertical direction - ±0.05mm can be selected as the minimum tolerance of length specification, which ensures the stability of the mechanism	- Simple and aesthetic connection	- Connected to the baffle to effectively block the mechanism in operation and prevent interference - Easy to fasten and install in narrow spaces

Precautions

① Fastening method of hex post.
The post is generally fastened by torque method. For bolts, fasten them within the range of fastening torque, otherwise excessive torque will cause thread fracture.
② Anti-rust specification selection and maintenance.
If there are requirements for anti-corrosion performance, select products made of stainless steel (austenitic stainless steel).
When carbon steel material with weak anti-corrosion performance is selected, it is recommended to store it in a constant-temperature and dry environment, and regularly apply anti-corrosion oil for maintenance.

Example of Use

Direct-from-Manufacturer MISUMI Hexagonal Posts Embedded

Equipment name: Pull-in conveyor
Function description:
The pull-in conveyor is a space-saving type non-driving conveyor
Function: With the collaboration of the pull-in mechanism and the roller bar, the conveying function can be achieved without driving equipment, and the detection is performed with a proximity sensor, thus improving the operation efficiency of the equipment, suitable for narrow spaces with no room at the bottom and difficult for hands to reach in.

Function of hex post in the mechanism
① Hex profile is used as a fastening connector in the mechanism to support the weight of all workpieces on the upper part and increase the stability of the mechanism.
②Because the mechanism is often used in narrow space, the fastening method of hex profile is very simple and convenient, thus facilitating the installation and maintenance of equipment.

For details, click and refer to

Pull-in Conveyor

Application Industries

Medical	Semiconductor	Electronic & Electrical

Smart Phones	Food	Automotive

Related Documents

For applicable tightening torque for bolts, click

Torque Table
For bolt strength, click

Bolt Strength Table
For anti-rust performance of metal materials and surface treatment, click

Anti-rust Performance Table

: 30; 60; 90

Part Number
E-LSBJ8-[15-250/0.5]-M[3,4]-N[3,4]
E-LSBJ10-[15-350/0.5]-M[3,4,5]-N[3,4,5]
E-LSBJ12-[20-500/0.5]-M[4,5,6]-N[4,5,6]
E-LSBJ13-[20-500/0.5]-M[4,5,6]-N[4,5,6]
E-LSBJ14-[25-600/0.5]-M[5,6,8]-N[5,6,8]
E-LSBJ17-[25-600/0.5]-M[5,6,8]-N[5,6,8]
E-LSBJ19-[40-600/0.5]-M[5,6,8,10,12]-N[5,6,8,10,12]
E-LSBJ24-[50-700/0.5]-M[5,6,8,10,12,16]-N[5,6,8,10,12,16]
E-LSBJ27-[50-800/0.5]-M[5,6,8,10,12,16]-N[5,6,8,10,12,16]
E-LSBJ27W-[50-800/0.5]-M[5,6,8,10,12,16]-N[5,6,8,10,12,16]
E-LSBJ30-[60-1000/0.5]-M[5,6,8,10,12,16,20]-N[6,8,10,12,16,20]
E-LSBJ30W-[60-1000/0.5]-M[5,6,8,10,12,16,20]-N[6,8,10,12,16,20]
E-LSBJ32-[60-1000/0.5]-M[5,6,8,10,12,16,20]-N[6,8,10,12,16,20]
E-LSBJ32W-[60-1000/0.5]-M[5,6,8,10,12,16,20]-N[6,8,10,12,16,20]
E-LSBJF8-[15-250/0.5]-M[3,4]-N[3,4]-G[2-4/1]-H[2-4/1]
E-LSBJF10-[15-350/0.5]-M[3,4,5]-N[3,4,5]-G[2-5/1]-H[2-5/1]
E-LSBJF12-[20-500/0.5]-M[4,5,6]-N[4,5,6]-G[2-6/1]-H[2-6/1]
E-LSBJF13-[20-500/0.5]-M[4,5,6]-N[4,5,6]-G[2-6/1]-H[2-6/1]
E-LSBJF14-[25-600/0.5]-M[5,6,8]-N[5,6,8]-G[2-8/1]-H[2-8/1]
E-LSBJF17-[25-600/0.5]-M[5,6,8]-N[5,6,8]-G[2-8/1]-H[2-8/1]
E-LSBJF19-[40-600/0.5]-M[5,6,8,10,12]-N[5,6,8,10,12]-G[2-10/1]-H[2-10/1]
E-LSBJF24-[50-700/0.5]-M[5,6,8,10,12,16]-N[5,6,8,10,12,16]-G[2-12/1]-H[2-12/1]
E-LSBJF27-[50-800/0.5]-M[5,6,8,10,12,16]-N[5,6,8,10,12,16]-G0-H0
E-LSBJF27-[50-800/0.5]-M[5,6,8,10,12,16]-N[5,6,8,10,12,16]-G0-H[2-16/1]
E-LSBJF27-[50-800/0.5]-M[5,6,8,10,12,16]-N[5,6,8,10,12,16]-G[2-16/1]-H0
E-LSBJF27-[50-800/0.5]-M[5,6,8,10,12,16]-N[5,6,8,10,12,16]-G[2-16/1]-H[2-16/1]
E-LSBJF27W-[50-800/0.5]-M[5,6,8,10,12,16]-N[5,6,8,10,12,16]-G[2-16/1]-H[2-16/1]
E-LSBJF30-[60-1000/0.5]-M[5,6,8,10,12,16,20]-N[6,8,10,12,16,20]-G0-H0
E-LSBJF30-[60-1000/0.5]-M[5,6,8,10,12,16,20]-N[6,8,10,12,16,20]-G0-H[2-16/1]
E-LSBJF30-[60-1000/0.5]-M[5,6,8,10,12,16,20]-N[6,8,10,12,16,20]-G[2-16/1]-H0
E-LSBJF30-[60-1000/0.5]-M[5,6,8,10,12,16,20]-N[6,8,10,12,16,20]-G[2-16/1]-H[2-16/1]
E-LSBJF30W-[60-1000/0.5]-M[5,6,8,10,12,16,20]-N[6,8,10,12,16,20]-G[2-16/1]-H[2-16/1]
E-LSBJF32-[60-1000/0.5]-M[5,6,8,10,12,16,20]-N[6,8,10,12,16,20]-G[2-20/1]-H[2-20/1]
E-LSBJF32W-[60-1000/0.5]-M[5,6,8,10,12,16,20]-N[6,8,10,12,16,20]-G[2-20/1]-H[2-20/1]
E-NLSBJ8-[15-250/0.5]-M[3,4]-N[3,4]
E-NLSBJ10-[15-350/0.5]-M[3,4,5]-N[3,4,5]
E-NLSBJ12-[20-500/0.5]-M[4,5,6]-N[4,5,6]
E-NLSBJ13-[20-500/0.5]-M[4,5,6]-N[4,5,6]
E-NLSBJ14-[25-600/0.5]-M[5,6,8]-N[5,6,8]
E-NLSBJ17-[25-600/0.5]-M[5,6,8]-N[5,6,8]
E-NLSBJ19-[40-600/0.5]-M[5,6,8,10,12]-N[5,6,8,10,12]
E-NLSBJ24-[50-700/0.5]-M[5,6,8,10,12,16]-N[5,6,8,10,12,16]
E-NLSBJ27-[50-800/0.5]-M[5,6,8,10,12,16]-N[5,6,8,10,12,16]
E-NLSBJ27W-[50-800/0.5]-M[5,6,8,10,12,16]-N[5,6,8,10,12,16]
E-NLSBJ30-[60-1000/0.5]-M[5,6,8,10,12,16,20]-N[6,8,10,12,16,20]
E-NLSBJ30W-[60-1000/0.5]-M[5,6,8,10,12,16,20]-N[6,8,10,12,16,20]
E-NLSBJ32-[60-1000/0.5]-M[5,6,8,10,12,16,20]-N[6,8,10,12,16,20]
E-NLSBJ32W-[60-1000/0.5]-M[5,6,8,10,12,16,20]-N[6,8,10,12,16,20]
E-NLSBJF8-[15-250/0.5]-M[3,4]-N[3,4]-G0-H0
E-NLSBJF8-[15-250/0.5]-M[3,4]-N[3,4]-G0-H[2-4/1]
E-NLSBJF8-[15-250/0.5]-M[3,4]-N[3,4]-G[2-4/1]-H0
E-NLSBJF8-[15-250/0.5]-M[3,4]-N[3,4]-G[2-4/1]-H[2-4/1]
E-NLSBJF10-[15-350/0.5]-M[3,4,5]-N[3,4,5]-G0-H0
E-NLSBJF10-[15-350/0.5]-M[3,4,5]-N[3,4,5]-G0-H[2-5/1]
E-NLSBJF10-[15-350/0.5]-M[3,4,5]-N[3,4,5]-G[2-5/1]-H0
E-NLSBJF10-[15-350/0.5]-M[3,4,5]-N[3,4,5]-G[2-5/1]-H[2-5/1]
E-NLSBJF12-[20-500/0.5]-M[4,5,6]-N[4,5,6]-G0-H0
E-NLSBJF12-[20-500/0.5]-M[4,5,6]-N[4,5,6]-G0-H[2-6/1]
E-NLSBJF12-[20-500/0.5]-M[4,5,6]-N[4,5,6]-G[2-6/1]-H0
E-NLSBJF12-[20-500/0.5]-M[4,5,6]-N[4,5,6]-G[2-6/1]-H[2-6/1]
E-NLSBJF13-[20-500/0.5]-M[4,5,6]-N[4,5,6]-G0-H0
E-NLSBJF13-[20-500/0.5]-M[4,5,6]-N[4,5,6]-G0-H[2-6/1]
E-NLSBJF13-[20-500/0.5]-M[4,5,6]-N[4,5,6]-G[2-6/1]-H0
E-NLSBJF13-[20-500/0.5]-M[4,5,6]-N[4,5,6]-G[2-6/1]-H[2-6/1]
E-NLSBJF14-[25-600/0.5]-M[5,6,8]-N[5,6,8]-G0-H0
E-NLSBJF14-[25-600/0.5]-M[5,6,8]-N[5,6,8]-G0-H[2-8/1]
E-NLSBJF14-[25-600/0.5]-M[5,6,8]-N[5,6,8]-G[2-8/1]-H0
E-NLSBJF14-[25-600/0.5]-M[5,6,8]-N[5,6,8]-G[2-8/1]-H[2-8/1]
E-NLSBJF17-[25-600/0.5]-M[5,6,8]-N[5,6,8]-G0-H0
E-NLSBJF17-[25-600/0.5]-M[5,6,8]-N[5,6,8]-G0-H[2-8/1]
E-NLSBJF17-[25-600/0.5]-M[5,6,8]-N[5,6,8]-G[2-8/1]-H0
E-NLSBJF17-[25-600/0.5]-M[5,6,8]-N[5,6,8]-G[2-8/1]-H[2-8/1]
E-NLSBJF19-[40-600/0.5]-M[5,6,8,10,12]-N[5,6,8,10,12]-G0-H0
E-NLSBJF19-[40-600/0.5]-M[5,6,8,10,12]-N[5,6,8,10,12]-G0-H[2-10/1]
E-NLSBJF19-[40-600/0.5]-M[5,6,8,10,12]-N[5,6,8,10,12]-G[2-10/1]-H0
E-NLSBJF19-[40-600/0.5]-M[5,6,8,10,12]-N[5,6,8,10,12]-G[2-10/1]-H[2-10/1]
E-NLSBJF24-[50-700/0.5]-M[5,6,8,10,12,16]-N[5,6,8,10,12,16]-G0-H0
E-NLSBJF24-[50-700/0.5]-M[5,6,8,10,12,16]-N[5,6,8,10,12,16]-G0-H[2-12/1]
E-NLSBJF24-[50-700/0.5]-M[5,6,8,10,12,16]-N[5,6,8,10,12,16]-G[2-12/1]-H0
E-NLSBJF24-[50-700/0.5]-M[5,6,8,10,12,16]-N[5,6,8,10,12,16]-G[2-12/1]-H[2-12/1]
E-NLSBJF27-[50-800/0.5]-M[5,6,8,10,12,16]-N[5,6,8,10,12,16]-G0-H0
E-NLSBJF27-[50-800/0.5]-M[5,6,8,10,12,16]-N[5,6,8,10,12,16]-G0-H[2-16/1]
E-NLSBJF27-[50-800/0.5]-M[5,6,8,10,12,16]-N[5,6,8,10,12,16]-G[2-16/1]-H0
E-NLSBJF27-[50-800/0.5]-M[5,6,8,10,12,16]-N[5,6,8,10,12,16]-G[2-16/1]-H[2-16/1]
E-NLSBJF27W-[50-800/0.5]-M[5,6,8,10,12,16]-N[5,6,8,10,12,16]-G[2-16/1]-H[2-16/1]
E-NLSBJF30-[60-1000/0.5]-M[5,6,8,10,12,16,20]-N[6,8,10,12,16,20]-G0-H0
E-NLSBJF30-[60-1000/0.5]-M[5,6,8,10,12,16,20]-N[6,8,10,12,16,20]-G0-H[2-16/1]
E-NLSBJF30-[60-1000/0.5]-M[5,6,8,10,12,16,20]-N[6,8,10,12,16,20]-G[2-16/1]-H0
E-NLSBJF30-[60-1000/0.5]-M[5,6,8,10,12,16,20]-N[6,8,10,12,16,20]-G[2-16/1]-H[2-16/1]
E-NLSBJF30W-[60-1000/0.5]-M[5,6,8,10,12,16,20]-N[6,8,10,12,16,20]-G[2-16/1]-H[2-16/1]

Price	Minimum Order Qty.	Days to Ship	RoHS	Material	Wrench Flats B (or D) (mm)	Surface Treatment	Length L (mm)	Type	Pilot Dia. P, V (φ)	Thread Diameter M (mm)	Thread Diameter N (mm)	Thread Length G (mm)	H (mm)
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	8	Black Oxide	15 ～ 250	Both Ends Tapped　 Stepped Part Selectable	6	3 ～ 4	3 ～ 4	-	-
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	10	Black Oxide	15 ～ 350	Both Ends Tapped　 Stepped Part Selectable	8	3 ～ 5	3 ～ 5	-	-
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	12	Black Oxide	20 ～ 500	Both Ends Tapped　 Stepped Part Selectable	10	4 ～ 6	4 ～ 6	-	-
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	13	Black Oxide	20 ～ 500	Both Ends Tapped　 Stepped Part Selectable	10	4 ～ 6	4 ～ 6	-	-
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	14	Black Oxide	25 ～ 600	Both Ends Tapped　 Stepped Part Selectable	12	5 ～ 8	5 ～ 8	-	-
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	17	Black Oxide	25 ～ 600	Both Ends Tapped　 Stepped Part Selectable	12	5 ～ 8	5 ～ 8	-	-
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	19	Black Oxide	40 ～ 600	Both Ends Tapped　 Stepped Part Selectable	16	5 ～ 12	5 ～ 12	-	-
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	24	Black Oxide	50 ～ 700	Both Ends Tapped　 Stepped Part Selectable	20	5 ～ 16	5 ～ 16	-	-
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	27	Black Oxide	50 ～ 800	Both Ends Tapped　 Stepped Part Selectable	24	5 ～ 16	5 ～ 16	-	-
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	27	Black Oxide	50 ～ 800	Both Ends Tapped　 Stepped Part Selectable	20	5 ～ 16	5 ～ 16	-	-
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	30	Black Oxide	60 ～ 1000	Both Ends Tapped　 Stepped Part Selectable	28	5 ～ 20	6 ～ 20	-	-
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	30	Black Oxide	60 ～ 1000	Both Ends Tapped　 Stepped Part Selectable	24	5 ～ 20	6 ～ 20	-	-
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	32	Black Oxide	60 ～ 1000	Both Ends Tapped　 Stepped Part Selectable	30	5 ～ 20	6 ～ 20	-	-
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	32	Black Oxide	60 ～ 1000	Both Ends Tapped　 Stepped Part Selectable	24	5 ～ 20	6 ～ 20	-	-
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	8	Black Oxide	15 ～ 250	Both Ends Tapped Stepped Part Configurable	6	3 ～ 4	3 ～ 4	2 ～ 4	2 ～ 4
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	10	Black Oxide	15 ～ 350	Both Ends Tapped Stepped Part Configurable	8	3 ～ 5	3 ～ 5	2 ～ 5	2 ～ 5
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	12	Black Oxide	20 ～ 500	Both Ends Tapped Stepped Part Configurable	10	4 ～ 6	4 ～ 6	2 ～ 6	2 ～ 6
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	13	Black Oxide	20 ～ 500	Both Ends Tapped Stepped Part Configurable	10	4 ～ 6	4 ～ 6	2 ～ 6	2 ～ 6
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	14	Black Oxide	25 ～ 600	Both Ends Tapped Stepped Part Configurable	12	5 ～ 8	5 ～ 8	2 ～ 8	2 ～ 8
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	17	Black Oxide	25 ～ 600	Both Ends Tapped Stepped Part Configurable	12	5 ～ 8	5 ～ 8	2 ～ 8	2 ～ 8
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	19	Black Oxide	40 ～ 600	Both Ends Tapped Stepped Part Configurable	16	5 ～ 12	5 ～ 12	2 ～ 10	2 ～ 10
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	24	Black Oxide	50 ～ 700	Both Ends Tapped Stepped Part Configurable	20	5 ～ 16	5 ～ 16	2 ～ 12	2 ～ 12
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	27	Black Oxide	50 ～ 800	Both Ends Tapped Stepped Part Configurable	24	5 ～ 16	5 ～ 16	0	0
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	27	Black Oxide	50 ～ 800	Both Ends Tapped Stepped Part Configurable	24	5 ～ 16	5 ～ 16	0	2 ～ 16
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	27	Black Oxide	50 ～ 800	Both Ends Tapped Stepped Part Configurable	24	5 ～ 16	5 ～ 16	2 ～ 16	0
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	27	Black Oxide	50 ～ 800	Both Ends Tapped Stepped Part Configurable	24	5 ～ 16	5 ～ 16	2 ～ 16	2 ～ 16
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	27	Black Oxide	50 ～ 800	Both Ends Tapped Stepped Part Configurable	20	5 ～ 16	5 ～ 16	2 ～ 16	2 ～ 16
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	30	Black Oxide	60 ～ 1000	Both Ends Tapped Stepped Part Configurable	28	5 ～ 20	6 ～ 20	0	0
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	30	Black Oxide	60 ～ 1000	Both Ends Tapped Stepped Part Configurable	28	5 ～ 20	6 ～ 20	0	2 ～ 16
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	30	Black Oxide	60 ～ 1000	Both Ends Tapped Stepped Part Configurable	28	5 ～ 20	6 ～ 20	2 ～ 16	0
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	30	Black Oxide	60 ～ 1000	Both Ends Tapped Stepped Part Configurable	28	5 ～ 20	6 ～ 20	2 ～ 16	2 ～ 16
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	30	Black Oxide	60 ～ 1000	Both Ends Tapped Stepped Part Configurable	24	5 ～ 20	6 ～ 20	2 ～ 16	2 ～ 16
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	32	Black Oxide	60 ～ 1000	Both Ends Tapped Stepped Part Configurable	30	5 ～ 20	6 ～ 20	2 ～ 20	2 ～ 20
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	32	Black Oxide	60 ～ 1000	Both Ends Tapped Stepped Part Configurable	24	5 ～ 20	6 ～ 20	2 ～ 20	2 ～ 20
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	8	Not Provided	15 ～ 250	Both Ends Tapped　 Stepped Part Selectable	6	3 ～ 4	3 ～ 4	-	-
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	10	Not Provided	15 ～ 350	Both Ends Tapped　 Stepped Part Selectable	8	3 ～ 5	3 ～ 5	-	-
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	12	Not Provided	20 ～ 500	Both Ends Tapped　 Stepped Part Selectable	10	4 ～ 6	4 ～ 6	-	-
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	13	Not Provided	20 ～ 500	Both Ends Tapped　 Stepped Part Selectable	10	4 ～ 6	4 ～ 6	-	-
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	14	Not Provided	25 ～ 600	Both Ends Tapped　 Stepped Part Selectable	12	5 ～ 8	5 ～ 8	-	-
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	17	Not Provided	25 ～ 600	Both Ends Tapped　 Stepped Part Selectable	12	5 ～ 8	5 ～ 8	-	-
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	19	Not Provided	40 ～ 600	Both Ends Tapped　 Stepped Part Selectable	16	5 ～ 12	5 ～ 12	-	-
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	24	Not Provided	50 ～ 700	Both Ends Tapped　 Stepped Part Selectable	20	5 ～ 16	5 ～ 16	-	-
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	27	Not Provided	50 ～ 800	Both Ends Tapped　 Stepped Part Selectable	24	5 ～ 16	5 ～ 16	-	-
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	27	Not Provided	50 ～ 800	Both Ends Tapped　 Stepped Part Selectable	20	5 ～ 16	5 ～ 16	-	-
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	30	Not Provided	60 ～ 1000	Both Ends Tapped　 Stepped Part Selectable	28	5 ～ 20	6 ～ 20	-	-
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	30	Not Provided	60 ～ 1000	Both Ends Tapped　 Stepped Part Selectable	24	5 ～ 20	6 ～ 20	-	-
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	32	Not Provided	60 ～ 1000	Both Ends Tapped　 Stepped Part Selectable	30	5 ～ 20	6 ～ 20	-	-
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	32	Not Provided	60 ～ 1000	Both Ends Tapped　 Stepped Part Selectable	24	5 ～ 20	6 ～ 20	-	-
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	8	Not Provided	15 ～ 250	Both Ends Tapped Stepped Part Configurable	6	3 ～ 4	3 ～ 4	0	0
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	8	Not Provided	15 ～ 250	Both Ends Tapped Stepped Part Configurable	6	3 ～ 4	3 ～ 4	0	2 ～ 4
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	8	Not Provided	15 ～ 250	Both Ends Tapped Stepped Part Configurable	6	3 ～ 4	3 ～ 4	2 ～ 4	0
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	8	Not Provided	15 ～ 250	Both Ends Tapped Stepped Part Configurable	6	3 ～ 4	3 ～ 4	2 ～ 4	2 ～ 4
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	10	Not Provided	15 ～ 350	Both Ends Tapped Stepped Part Configurable	8	3 ～ 5	3 ～ 5	0	0
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	10	Not Provided	15 ～ 350	Both Ends Tapped Stepped Part Configurable	8	3 ～ 5	3 ～ 5	0	2 ～ 5
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	10	Not Provided	15 ～ 350	Both Ends Tapped Stepped Part Configurable	8	3 ～ 5	3 ～ 5	2 ～ 5	0
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	10	Not Provided	15 ～ 350	Both Ends Tapped Stepped Part Configurable	8	3 ～ 5	3 ～ 5	2 ～ 5	2 ～ 5
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	12	Not Provided	20 ～ 500	Both Ends Tapped Stepped Part Configurable	10	4 ～ 6	4 ～ 6	0	0
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	12	Not Provided	20 ～ 500	Both Ends Tapped Stepped Part Configurable	10	4 ～ 6	4 ～ 6	0	2 ～ 6
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	12	Not Provided	20 ～ 500	Both Ends Tapped Stepped Part Configurable	10	4 ～ 6	4 ～ 6	2 ～ 6	0
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	12	Not Provided	20 ～ 500	Both Ends Tapped Stepped Part Configurable	10	4 ～ 6	4 ～ 6	2 ～ 6	2 ～ 6
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	13	Not Provided	20 ～ 500	Both Ends Tapped Stepped Part Configurable	10	4 ～ 6	4 ～ 6	0	0
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	13	Not Provided	20 ～ 500	Both Ends Tapped Stepped Part Configurable	10	4 ～ 6	4 ～ 6	0	2 ～ 6
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	13	Not Provided	20 ～ 500	Both Ends Tapped Stepped Part Configurable	10	4 ～ 6	4 ～ 6	2 ～ 6	0
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	13	Not Provided	20 ～ 500	Both Ends Tapped Stepped Part Configurable	10	4 ～ 6	4 ～ 6	2 ～ 6	2 ～ 6
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	14	Not Provided	25 ～ 600	Both Ends Tapped Stepped Part Configurable	12	5 ～ 8	5 ～ 8	0	0
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	14	Not Provided	25 ～ 600	Both Ends Tapped Stepped Part Configurable	12	5 ～ 8	5 ～ 8	0	2 ～ 8
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	14	Not Provided	25 ～ 600	Both Ends Tapped Stepped Part Configurable	12	5 ～ 8	5 ～ 8	2 ～ 8	0
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	14	Not Provided	25 ～ 600	Both Ends Tapped Stepped Part Configurable	12	5 ～ 8	5 ～ 8	2 ～ 8	2 ～ 8
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	17	Not Provided	25 ～ 600	Both Ends Tapped Stepped Part Configurable	12	5 ～ 8	5 ～ 8	0	0
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	17	Not Provided	25 ～ 600	Both Ends Tapped Stepped Part Configurable	12	5 ～ 8	5 ～ 8	0	2 ～ 8
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	17	Not Provided	25 ～ 600	Both Ends Tapped Stepped Part Configurable	12	5 ～ 8	5 ～ 8	2 ～ 8	0
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	17	Not Provided	25 ～ 600	Both Ends Tapped Stepped Part Configurable	12	5 ～ 8	5 ～ 8	2 ～ 8	2 ～ 8
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	19	Not Provided	40 ～ 600	Both Ends Tapped Stepped Part Configurable	16	5 ～ 12	5 ～ 12	0	0
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	19	Not Provided	40 ～ 600	Both Ends Tapped Stepped Part Configurable	16	5 ～ 12	5 ～ 12	0	2 ～ 10
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	19	Not Provided	40 ～ 600	Both Ends Tapped Stepped Part Configurable	16	5 ～ 12	5 ～ 12	2 ～ 10	0
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	19	Not Provided	40 ～ 600	Both Ends Tapped Stepped Part Configurable	16	5 ～ 12	5 ～ 12	2 ～ 10	2 ～ 10
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	24	Not Provided	50 ～ 700	Both Ends Tapped Stepped Part Configurable	20	5 ～ 16	5 ～ 16	0	0
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	24	Not Provided	50 ～ 700	Both Ends Tapped Stepped Part Configurable	20	5 ～ 16	5 ～ 16	0	2 ～ 12
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	24	Not Provided	50 ～ 700	Both Ends Tapped Stepped Part Configurable	20	5 ～ 16	5 ～ 16	2 ～ 12	0
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	24	Not Provided	50 ～ 700	Both Ends Tapped Stepped Part Configurable	20	5 ～ 16	5 ～ 16	2 ～ 12	2 ～ 12
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	27	Not Provided	50 ～ 800	Both Ends Tapped Stepped Part Configurable	24	5 ～ 16	5 ～ 16	0	0
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	27	Not Provided	50 ～ 800	Both Ends Tapped Stepped Part Configurable	24	5 ～ 16	5 ～ 16	0	2 ～ 16
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	27	Not Provided	50 ～ 800	Both Ends Tapped Stepped Part Configurable	24	5 ～ 16	5 ～ 16	2 ～ 16	0
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	27	Not Provided	50 ～ 800	Both Ends Tapped Stepped Part Configurable	24	5 ～ 16	5 ～ 16	2 ～ 16	2 ～ 16
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	27	Not Provided	50 ～ 800	Both Ends Tapped Stepped Part Configurable	20	5 ～ 16	5 ～ 16	2 ～ 16	2 ～ 16
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	30	Not Provided	60 ～ 1000	Both Ends Tapped Stepped Part Configurable	28	5 ～ 20	6 ～ 20	0	0
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	30	Not Provided	60 ～ 1000	Both Ends Tapped Stepped Part Configurable	28	5 ～ 20	6 ～ 20	0	2 ～ 16
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	30	Not Provided	60 ～ 1000	Both Ends Tapped Stepped Part Configurable	28	5 ～ 20	6 ～ 20	2 ～ 16	0
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	30	Not Provided	60 ～ 1000	Both Ends Tapped Stepped Part Configurable	28	5 ～ 20	6 ～ 20	2 ～ 16	2 ～ 16
-	1 Piece(s)	9 Day(s)	10	[Steel] General structural steel or carbon steel	30	Not Provided	60 ～ 1000	Both Ends Tapped Stepped Part Configurable	24	5 ～ 20	6 ～ 20	2 ～ 16	2 ～ 16

Basic Information

Type	Hex	End Shape (Left)	Tapped	End Shape (Right)	Tapped
Post Type	Solid	Scale	Without Scale	Pilot (Concave-Convex at End)	Provided
Gas Vent Hole	Not Provided

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Silicon Rubber, Urethane Molded Bearings Flat, with Threaded Shaft	Strut Clamps Equal Dia., Perpendicular Configuration/Reversed	Metal Washers Standard Class T Dimension Selection, T Dimension Configurable

Representative model: UMSWH3-10	Representative model: KDST15	Representative model: WSSM13-6-5
Advantages: High quality, affordable price, short delivery time	Advantages: Full range, high precision and quality	Advantages: Matching shaft products, full range

Search by Category / Brand

Search by Category

How can we improve?