What are the characteristics of claw couplings?

Claw couplings can absorb vibration, compensate radial and angular deviation, and are maintenance free, oil resistant and electrically insulated.

What are the applications of claw couplings?

Applicable motor types for claw couplings: recommended for stepping motors and universal motors.

How to select according to the purpose, environment, working conditions?

Please refer to the link page for specific instructions. https://www.misumi.com.cn/special/coupling/select/situation/

A coupling is a part that connects two different rotating bodies (motor shaft, ball screw, etc.) and aims at transmitting torque. The load of assembly adjustment is reduced by absorbing the axis deviation (lateral misalignment, angular misalignment and axial amplitude) between rotating bodies. And in case of accidental overload, the coupling is destroyed and the rotating bodies are disconnected to protect the expensive power part and the whole device.

Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 6:30 24/11/2024 to 4:30 (IST) 25/11/2024. We apologize for the inconvenience.
Please note that the MISUMI Pune office and warehouse will be closed on November 20th due to the state election.
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(17 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

E-LMPJ14L22-[3,4,5,6,6.35,7,8]-[3,4,5,6,6.35,7,8]

Shaft Bore Dia.1 d1 (or d) Shaft Bore Dia. 2 d2 (or d) O.D. Overall Length type Days to Ship

Specification/Dimensions

Shaft Bore Dia.1 d1 (or d)(Ø)
3

4

5

6

6.35

7

8

9

9.525

10

11

12

12.7

13

14

15

16

17

18

19

20

22

24

25

28

30

32

35

38

40

42

45

50

55

60
Clear
Shaft Bore Dia. 2 d2 (or d)(Ø)
3

4

5

6

6.35

7

8

9

9.525

10

11

12

12.7

13

14

15

16

17

18

19

20

22

24

25

28

30

32

35

38

40

42

45

50

55

60
Clear
O.D.(Ø)
14

20

25

30

35

40

55

65

80

95

105
Clear
Overall Length(mm)
22

25

30

34

35

40

50

55

66

78

90

114

126

140
Clear
type
- E-LMPJ
Clear

Days to Ship

All

15 Day(s) or Less

16 Day(s) or Less
Clear

Specify Alterations

Jaw Couplings Set Screw Type

Name: Jaw Couplings Set Screw Type
Brand: MISUMI
Availability: PreOrder

Check FAQ of this product (4 items)

Brand :

MISUMI

MiSUMi Economy

MISUMI

Part Number :

E-LMPJ14L22-[3,4,5,6,6.35,7,8]-[3,4,5,6,6.35,7,8]

E-LMPJ20L25-[4,5,6,6.35,7,8,9,9.525,10]-[4,5,6,6.35,7,8,9,9.525,10]

E-LMPJ20L30-[4,5,6,6.35,7,8,9,9.525,10]-[4,5,6,6.35,7,8,9,9.525,10]

E-LMPJ25L30-[5,6,6.35,7,8,9,9.525,10,11,12,12.7,13,14]-[5,6,6.35,7,8,9,9.525,10,11,12,12.7,13,14]

E-LMPJ25L35-[5,6,6.35,7,8,9,9.525,10,11,12,12.7,13,14]-[5,6,6.35,7,8,9,9.525,10,11,12,12.7,13,14]

E-LMPJ30L35-[5,6,6.35,7,8,9,9.525,10,11,12,12.7,13,14,15,16]-[5,6,6.35,7,8,9,9.525,10,11,12,12.7,13,14,15,16]

E-LMPJ30L40-[5,6,6.35,7,8,9,9.525,10,11,12,12.7,13,14,15,16]-[5,6,6.35,7,8,9,9.525,10,11,12,12.7,13,14,15,16]

E-LMPJ35L50-[8,9,9.525,10,11,12,12.7,13,14,15,16,17,18,19,20]-[8,9,9.525,10,11,12,12.7,13,14,15,16,17,18,19,20]

E-LMPJ40L40-[8,9,9.525,10,11,12,12.7,13,14,15,16,17,18,19,20,22]-[8,9,9.525,10,11,12,12.7,13,14,15,16,17,18,19,20,22]

E-LMPJ40L50-[8,9,9.525,10,11,12,12.7,13,14,15,16,17,18,19,20,22]-[8,9,9.525,10,11,12,12.7,13,14,15,16,17,18,19,20,22]

E-LMPJ40L55-[8,9,9.525,10,11,12,12.7,13,14,15,16,17,18,19,20,22]-[8,9,9.525,10,11,12,12.7,13,14,15,16,17,18,19,20,22]

E-LMPJ40L66-[8,9,9.525,10,11,12,12.7,13,14,15,16,17,18,19,20,22]-[8,9,9.525,10,11,12,12.7,13,14,15,16,17,18,19,20,22]

E-LMPJ55L78-[12,12.7,13,14,15,16,17,18,19,20,22,24,25,28,30]-[12,12.7,13,14,15,16,17,18,19,20,22,24,25,28,30]

E-LMPJ65L90-[14,15,16,17,18,19,20,22,24,25,28,30,32,35,38]-[14,15,16,17,18,19,20,22,24,25,28,30,32,35,38]

E-LMPJ80L114-[19,20,22,24,25,28,30,32,35,38,40,42,45]-[19,20,22,24,25,28,30,32,35,38,40,42,45]

E-LMPJ95L126-[20,22,24,25,28,30,32,35,38,40,42,45,50]-[20,22,24,25,28,30,32,35,38,40,42,45,50]

E-LMPJ105L140-[20,22,24,25,28,30,32,35,38,40,42,45,50,55,60]-[20,22,24,25,28,30,32,35,38,40,42,45,50,55,60]

E-LMPJ14L22-[3,4,5,6,6.35,7,8]-[3,4,5,6,6.35,7,8]

Order Qty :
Price :

---
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Data unavailable

Product Description

This is an economy item, The price is cheaper than the MISUMI standard product.

Product Overview

・Flexible Shaft Couplings is composed of 2 metal jaw disks in the coupling part and 1 elastomer resin adjustment ring.
・The resin adjustment ring can alleviate the inertial load impact during start and stop.
・Flexible Shaft Couplings is Easy to disassemble and assemble.
・Recommended for stepper motors and general-purpose motors.

Dimensional Drawing

E-LMPJ
尺寸图

・Material table

Part	Material	Surface Treatment	Accessory
Hub	Aluminum Alloy	Clear Anodized	Set Screw
Spacer	Polyurethane	-	Set Screw

Specification Table

Please follow the selection steps Flexible Shaft Couplings

～

to select the part no.

Part No.(Type·DL)	-	d₁	-	d₂
E-LMPJ14L22 E-LMPJ30L35 E-LMPJ30L40	- - -	5 7 7	- - -	6 8 10

Part No.			d₁、d₂Shaft Hole Dia.(d₁≤d₂)																																LF	LP	F
Type	D	L	d₁、d₂Shaft Hole Dia.(d₁≤d₂)																																LF	LP	F
E-LMPJ	14	L22	3	4	5	6	6.35	7	8
	20	L25		4	5	6	6.35	7	8	9	9.525	10
	20	L30		4	5	6	6.35	7	8	9	9.525	10																							19.1	8.6	5.3
	25	L30			5	6	6.35	7	8	9	9.525	10	11	12	12.7	13	14
	25	L34*			5	6	6.35	7	8	9	9.525	10	11	12	12.7	13	14
	30	L35			5	6	6.35	7	8	9	9.525	10	11	12	12.7	13	14	15	16
	30	L40			5	6	6.35	7	8	9	9.525	10	11	12	12.7	13	14	15	16
	35	L50							8	9	9.525	10	11	12	12.7	13	14	15	16	17	18	19	20
	40	L40							8	9	9.525	10	11	12	12.7	13	14	15	16	17	18	19	20	22
	40	L50							8	9	9.525	10	11	12	12.7	13	14	15	16	17	18	19	20	22
	40	L55							8	9	9.525	10	11	12	12.7	13	14	15	16	17	18	19	20	22
	40	L66							8	9	9.525	10	11	12	12.7	13	14	15	16	17	18	19	20	22
	55	L78												12	12.7	13	14	15	16	17	18	19	20	22	24	25	28	30
	65	L90															14	15	16	17	18	19	20	22	24	25	28	30	32	35	38
	80	L114																				19	20	22	24	25	28	30	32	35	38	40	42	45
	95	L126	20	22	24	25	28	30	32	35	38	40	42	45	50
	105	L140	20	22	24	25	28	30	32	35	38	40	42	45	50	55	60
	120	L160*				25	28	30	32	35	38	40	42	45	50	55	60	65	70	75	80

*L dimension was updated in March 2024.

■Characteristic Values

Part No.			F	Set Screw		Rated Torque (N·m)	Mass g
Type	D	L	F	M	Tightening Torque (N.m)	Rated Torque (N·m)	Mass g
E-LMPJ	14	L22	3.8	M2.5	1	5	6
	20	L25	5.2	M3	1.5	9	15
	20	L30	5.2		1.5	9	18
	25	L30	5.8		3.4	11	30
	25	L34	5.8			11	35
	30	L35	5.9	M4		12.5	40
	30	L40	5.9	M4		12.5	45
	35	L50	6.5	M5	7	15	92
	40	L40	6.7			17	150
	40	L50	6.7				188
	40	L55	6.7				206
	40	L66	6.7				248
	55	L78	11	M6	14	60	350
	65	L90	12.3	M8	30	160	500
	80	L114	17	M10	30	325	1000
	95	L126	20	M10	30	450	1500
	105	L140	20	M10	48	580	2000
	120	L135	25	M12	48	690	2500

Shaft Hole Dia. d₁·d₂	b(Keyway Width)		t Keyway Depth	Keyway Nominal Dim. b X h
Shaft Hole Dia. d₁·d₂	LK	RK	t Keyway Depth	Keyway Nominal Dim. b X h
8~10	3	3	1.4	3x3
11~12	4	4	1.8	4x4
13~17	5	5	2.3	5x5
18~22	6	6	2.8	6x6
23~30	8	8	3.3	8x7
31~38	10	10	3.3	10x8
39~44	12	12	3.3	12x8
45~50	14	14	3.8	14x9
51~58	16	16	4.3	16x10
59~65	18	18	4.4	18x11
66~75	20	20	4.9	20x12
76~85	22	22	5.4	22x14
86~95	25	25	5.4	25x14

Product Features

The characteristics are as follows:
It has a simple structure, no lubrication required / easy to repair and inspect / maintenance-free. It can operated continuously for a long time.
Polyurethane elastic parts are wear-resistant and oil-resistant, have large load capacity, long service life, and are safe and reliable.
This product is suitable for medium and high-speed applications.

Precautions

■ Calibration and adjustment
1. The Flexible Shaft Couplings allows axis deviation, and transmits rotation angle and torque, but when the axis deviation exceeds the allowable value, vibration will occur or the service life will be drastically reduced. Be sure to make calibration andadjustment.
2. Axis deviation includes lateral misalignment (parallel error of two axes), angular misalignment (angular error of two axes) and axial amplitude (axial movement of shaft).
Please calibrate and adjust the shaft to ensure that the axis deviation is below the allowable value recorded in the dimension and performance table of each product.
3. The allowable value of axis deviation recorded in the dimension and performance table refers to the situation when either lateral misalignment, angular misalignment or axial amplitude occurs alone. When more than two axis deviationsoccur at the same time, the corresponding allowable values are halved respectively.
4. Axis deviation not only occurs when assembling to the device, but also is caused by vibration, thermal expansion and bearing wear in operation. Therefore, it is recommended to set the axis deviation below 1/3 of the allowable value.

Usage Method

■Mounting method
STEP1 Insert the coupling
Confirm that the clamping bolt has been unscrewed, and then remove the dust, foreign matter and oil from the shaft and coupling bore.
Then, when inserting the Flexible Shaft Couplings into the shaft, please be careful not to put the disc under excessive stress such as compression or tension.
STEP2 Use fixture to adjust
Please use fixture to adjust and fix the concentricity of the left and right hubs of the coupling with high accuracy.
STEP3 Simple lateral misalignment and angular misalignment confirmation
Under the condition of unscrewed bolts, make the Flexible Shaft Couplings slide axially and confirm its smooth movement.
Then, rotate the coupling to make sure it moves smoothly.
Lateral misalignment is not allowed for single disc type coupling, so carry out positioning securely.

STEP4 Installation
Please adjust the shaft insertion amount according to the dimension ℓ in the product catalog, and use a torque wrench to tighten with the specified torque.
＊ If the specified torque cannot be reached once, please cross fasten the left and right clamps twice or three times.

Example of Use

Use example 1: motor × gear box
Example of Use

Use example 3: motor × encoder

Use example 2: motor × ball screw
Example of Use

Use example 4: motor × measuring tester

Application Industries

Electronic & Electrical	Automotive	Lithium battery

LCD	Smart Phones	Semiconductor

: 30; 45; 60

Part Number
E-LMPJ14L22-[3,4,5,6,6.35,7,8]-[3,4,5,6,6.35,7,8]
E-LMPJ20L25-[4,5,6,6.35,7,8,9,9.525,10]-[4,5,6,6.35,7,8,9,9.525,10]
E-LMPJ20L30-[4,5,6,6.35,7,8,9,9.525,10]-[4,5,6,6.35,7,8,9,9.525,10]
E-LMPJ25L30-[5,6,6.35,7,8,9,9.525,10,11,12,12.7,13,14]-[5,6,6.35,7,8,9,9.525,10,11,12,12.7,13,14]
E-LMPJ25L35-[5,6,6.35,7,8,9,9.525,10,11,12,12.7,13,14]-[5,6,6.35,7,8,9,9.525,10,11,12,12.7,13,14]
E-LMPJ30L35-[5,6,6.35,7,8,9,9.525,10,11,12,12.7,13,14,15,16]-[5,6,6.35,7,8,9,9.525,10,11,12,12.7,13,14,15,16]
E-LMPJ30L40-[5,6,6.35,7,8,9,9.525,10,11,12,12.7,13,14,15,16]-[5,6,6.35,7,8,9,9.525,10,11,12,12.7,13,14,15,16]
E-LMPJ35L50-[8,9,9.525,10,11,12,12.7,13,14,15,16,17,18,19,20]-[8,9,9.525,10,11,12,12.7,13,14,15,16,17,18,19,20]
E-LMPJ40L40-[8,9,9.525,10,11,12,12.7,13,14,15,16,17,18,19,20,22]-[8,9,9.525,10,11,12,12.7,13,14,15,16,17,18,19,20,22]
E-LMPJ40L50-[8,9,9.525,10,11,12,12.7,13,14,15,16,17,18,19,20,22]-[8,9,9.525,10,11,12,12.7,13,14,15,16,17,18,19,20,22]
E-LMPJ40L55-[8,9,9.525,10,11,12,12.7,13,14,15,16,17,18,19,20,22]-[8,9,9.525,10,11,12,12.7,13,14,15,16,17,18,19,20,22]
E-LMPJ40L66-[8,9,9.525,10,11,12,12.7,13,14,15,16,17,18,19,20,22]-[8,9,9.525,10,11,12,12.7,13,14,15,16,17,18,19,20,22]
E-LMPJ55L78-[12,12.7,13,14,15,16,17,18,19,20,22,24,25,28,30]-[12,12.7,13,14,15,16,17,18,19,20,22,24,25,28,30]
E-LMPJ65L90-[14,15,16,17,18,19,20,22,24,25,28,30,32,35,38]-[14,15,16,17,18,19,20,22,24,25,28,30,32,35,38]
E-LMPJ80L114-[19,20,22,24,25,28,30,32,35,38,40,42,45]-[19,20,22,24,25,28,30,32,35,38,40,42,45]
E-LMPJ95L126-[20,22,24,25,28,30,32,35,38,40,42,45,50]-[20,22,24,25,28,30,32,35,38,40,42,45,50]
E-LMPJ105L140-[20,22,24,25,28,30,32,35,38,40,42,45,50,55,60]-[20,22,24,25,28,30,32,35,38,40,42,45,50,55,60]

Price	Minimum Order Qty.	Days to Ship	RoHS	Shaft Bore Dia.1 d1 (or d) (Ø)	Shaft Bore Dia. 2 d2 (or d) (Ø)	O.D. (Ø)	Overall Length (mm)
-	1 Piece(s)	16 Day(s)	10	3 ～ 8	3 ～ 8	14	22
-	1 Piece(s)	16 Day(s)	10	4 ～ 10	4 ～ 10	20	25
-	1 Piece(s)	16 Day(s)	10	4 ～ 10	4 ～ 10	20	30
-	1 Piece(s)	16 Day(s)	10	5 ～ 14	5 ～ 14	25	30
-	1 Piece(s)	15 Day(s)	10	5 ～ 14	5 ～ 14	25	34
-	1 Piece(s)	16 Day(s)	10	5 ～ 16	5 ～ 16	30	35
-	1 Piece(s)	16 Day(s)	10	5 ～ 16	5 ～ 16	30	40
-	1 Piece(s)	16 Day(s)	10	8 ～ 20	8 ～ 20	35	50
-	1 Piece(s)	16 Day(s)	10	8 ～ 22	8 ～ 22	40	40
-	1 Piece(s)	16 Day(s)	10	8 ～ 22	8 ～ 22	40	50
-	1 Piece(s)	16 Day(s)	10	8 ～ 22	8 ～ 22	40	55
-	1 Piece(s)	16 Day(s)	10	8 ～ 22	8 ～ 22	40	66
-	1 Piece(s)	16 Day(s)	10	12 ～ 30	12 ～ 30	55	78
-	1 Piece(s)	16 Day(s)	10	14 ～ 38	14 ～ 38	65	90
-	1 Piece(s)	16 Day(s)	10	19 ～ 45	19 ～ 45	80	114
-	1 Piece(s)	16 Day(s)	10	20 ～ 50	20 ～ 50	95	126
-	1 Piece(s)	16 Day(s)	10	20 ～ 60	20 ～ 60	105	140

Basic Information

Series Name	Jaw	Application	Standard / For Servo Motors / Stepping Motor	Features	High Torque Type / Low Moment of Inertia / Vibration Insulation
Allowable Misalignment	Angular Misalignment / Eccentricity / Axial Misalignment	Body Material	Aluminum Alloy	Product Category	Coupling Main Body
Buffer Material	Polyurethane	Operating Temperature(°C)	-20::60	Shaft Tightening Method	Set Screw
Shaft Hole Shape	Standard

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently asked question (FAQ)

Question: What are the characteristics of claw couplings?: Answer: Claw couplings can absorb vibration, compensate radial and angular deviation, and are maintenance free, oil resistant and electrically insulated.
Question: What are the applications of claw couplings?: Answer: Applicable motor types for claw couplings: recommended for stepping motors and universal motors.
Question: How to select according to the purpose, environment, working conditions?: Answer: Please refer to the link page for specific instructions. https://www.misumi.com.cn/special/coupling/select/situation/
Question: What is a coupling?: Answer: A coupling is a part that connects two different rotating bodies (motor shaft, ball screw, etc.) and aims at transmitting torque. The load of assembly adjustment is reduced by absorbing the axis deviation (lateral misalignment, angular misalignment and axial amplitude) between rotating bodies. And in case of accidental overload, the coupling is destroyed and the rotating bodies are disconnected to protect the expensive power part and the whole device.

Check other FAQ (1 items) Hide

Search by Category / Brand

Search by Category

How can we improve?