Is the sensor shipped after installation?

The sensor components are shipped together with the main unit and need to be installed by the customer upon arrival.

Do actuators require regular maintenance?

Maintenance is required. Grease dry-out will cause the product to rust, and dry friction between the guide slider and the steel balls at high speeds will cause wear and tear, significantly reducing product life.

Does the E-MTH series come with a motor?

No it doesn’t. Customers need to use the motor brand they trust, depending on the actual conditions. Be sure to ensure concentricity when mounting the motor, as a skewed motor shaft and screw will affect use.

Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(15 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

E-MCH22-L5-[50-1500/50]-[BC,BL,BM,BR,NZ]-M75-[C,D]-PNP3

Lead Lead Effective Stroke Motor Position Motor Brand & Power Sensor Position type CAD Days to Ship

Specification/Dimensions

Lead
5

10

20
Clear
Lead
5

10

25
Clear
Effective Stroke(mm)
[50-1500/50mm Unit(s)]
Clear
Motor Position
- BC Motor Direct Connection
- BL Motor On Left Side
- BM Motor On Lower Side
- BR Motor On Right Side
Clear
Motor Brand & Power
- M75 Mitsubishi 750W
- P75 Panasonic 750W
- T75 Delta 750W
- Y75 Yaskawa 750W
- Z Prepared by Customer
Clear
Sensor Position
- C Motor Side
- D Motor Opposite Side
Clear
type
- E-MCH22
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

18 Day(s) or Less
Clear

Specify Alterations

Single Axis Robots E-MCH22 Screw Drive, Fully-Sealed Type(For Clean Environment)

Name: Single Axis Robots E-MCH22 Screw Drive, Fully-Sealed Type(For Clean Environment)
Brand: MISUMI
Availability: PreOrder

Check FAQ of this product (3 items)

Brand :

MISUMI

MiSUMi Economy

MISUMI

Part Number :

E-MCH22-L5-[50-1500/50]-[BC,BL,BM,BR,NZ]-M75-[C,D]-PNP3

E-MCH22-L5-[50-1500/50]-[BC,BL,BM,BR,NZ]-P75-[C,D]-PNP3

E-MCH22-L5-[50-1500/50]-[BC,BL,BM,BR,NZ]-T75-[C,D]-PNP3

E-MCH22-L5-[50-1500/50]-[BC,BL,BM,BR,NZ]-Y75-[C,D]-PNP3

E-MCH22-L5-[50-1500/50]-[BC,BL,BM,BR,NZ]-Z-[C,D]-PNP3

E-MCH22-L10-[50-1500/50]-[BC,BL,BM,BR,NZ]-M75-[C,D]

E-MCH22-L10-[50-1500/50]-[BC,BL,BM,BR,NZ]-P75-[C,D]

E-MCH22-L10-[50-1500/50]-[BC,BL,BM,BR,NZ]-T75-[C,D]

E-MCH22-L10-[50-1500/50]-[BC,BL,BM,BR,NZ]-Y75-[C,D]

E-MCH22-L10-[50-1500/50]-[BC,BL,BM,BR,NZ]-Z-[C,D]

E-MCH22-L25-[50-1500/50]-[BC,BL,BM,BR,NZ]-M75-[C,D]

E-MCH22-L25-[50-1500/50]-[BC,BL,BM,BR,NZ]-P75-[C,D]

E-MCH22-L25-[50-1500/50]-[BC,BL,BM,BR,NZ]-T75-[C,D]

E-MCH22-L25-[50-1500/50]-[BC,BL,BM,BR,NZ]-Y75-[C,D]

E-MCH22-L25-[50-1500/50]-[BC,BL,BM,BR,NZ]-Z-[C,D]

E-MCH22-L5-[50-1500/50]-[BC,BL,BM,BR,NZ]-M75-[C,D]-PNP3

Order Qty :
Price :

---
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

(i)
Caution

The product does not come with a driver, which must be purchased separately
The product comes with a sensor kit, which is unnecessary to select

Product Description

Economy series Aluminum Alloy Screw Drive Actuators E-MCH Series product only includes the main unit, not the driver, which must be purchased separately. The product comes with 3 NPN sensors, for which only mounting direction needs to be selected.

Product Overview of Single Axis Robots

Single Axis Robots, Economy series Aluminum Alloy Actuators are transmission devices integrating ball screws and guides, which are indispensable for the production process.
Up to ±0.01 or less.

Dimensional Drawing of Single Axis Robots

Components	Body	Guide	Screw	Nut	Slide Block	Cover
Material	Aluminum Alloy	Carbon Steel	Bearing Steel	SCM415H	Aluminum Alloy	Aluminum Alloy
Surface Treatment	Electro Plating	－	－	－	Anodized	Anodized

■BC Motor Exposed of Single Axis Robots

■BL Motor On Left Side of Single Axis Robots

■BR Motor On Right Side of Single Axis Robots

■BM Motor On Lower Side of Single Axis Robots

Specification Overview of Single Axis Robots

Specification Table of Single Axis Robots

Part Number	Lead (mm)	Stroke (50m increments)	Motor Position	Motor Brand	Motor Power	Sensor Position	Repetitive Positioning Accuracy (mm)	Max. Payload (kg)		Max. Speed (mm/sec)	Rated Thrust (N)
Type								Horizontal Use	Vertical Use
E-MCH22	5	100~1500	BC (Motor Direct Connection) BM (Motor On Lower Side) BL (Motor On Left Side) BR (Motor On Right Side)	M (Mitsubishi) P (Panasonic) Y (Yaskawa) T (Delta Electronics) Z (Prepared by Customer)	75 (750W)	C (External Motor Side) D (External Motor Opposite Side)	±0.01	150	55	250	2100
	10							150	45	500	1050
	25							120	20	1250	420

A motor is not included to this product and it must be purchased separately.

When the stroke exceeds 600mm, ball screw resonance will occur. In this case, reduce the movement speed.

Select a motor with brake for vertical use.

When Z is selected as the motor brand (prepared by customer), please provide the motor model and power when placing an order. (If necessary, provide the motor mountingdimensions)

As the drawings are schematic diagrams, please confirm the detailed dimensions according to CAD data.

Part Number	Lead (mm)	Motor Power (W)	Max. Movement Speed (mm/sec)
			100	150	200	250	300	350	400	450	500	550	600	650	700	750	800	850	900	950	1000	1050	1100	1150	1200	1250	1300	1350	1400	1450	1500
E-MCH22	5	750	250																	225		200		175		150		125		100
	10		500																	450		400		350		300		250		200
	25		1250																	1125		1000		875		750		625		500

Values in the table are reference values calculated according to the critical speed and DN value of the ball screw.

Values in the table are maximum safety speeds available for each stroke. As ball screws may resonate at longer strokes, such conditions as abnormal sound and vibrationmay occur when operating at the maximum speed. Therefore, the moving speed should be reduced appropriately.

Accessories

Parameters Use of Single Axis Robots

■Sensing Line Wiring Diagram of Single Axis Robots

■List of Recommended Servo Motors
Recommended Motor 750W

Product Features of Single Axis Robots

1. Simple design and installation
2. High precision ±0.01
3. High rigidity
4. Complete set of fittings

Example Use of Single Axis Robots

Precautions of Single Axis Robots

Precautions for use of Single Axis Robots
■Avoid using single-axis drive products in the following environments
①Dusty environment (especially metal powder)
②Environment with splashing water and oil
③Near fire sources
④Environment with excessive organic solutions and salt
⑤Environment with direct sunlight and heat radiation
⑥Environment subject to strong vibration and shock
⑦Environment with corrosive gas, combustible gas

■Single Axis Robots operating environment
Operating environment: normal temperature (no freezing, non-condensation)

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 45; 60

Part Number
E-MCH22-L5-[50-1500/50]-[BC,BL,BM,BR,NZ]-M75-[C,D]-PNP3
E-MCH22-L5-[50-1500/50]-[BC,BL,BM,BR,NZ]-P75-[C,D]-PNP3
E-MCH22-L5-[50-1500/50]-[BC,BL,BM,BR,NZ]-T75-[C,D]-PNP3
E-MCH22-L5-[50-1500/50]-[BC,BL,BM,BR,NZ]-Y75-[C,D]-PNP3
E-MCH22-L5-[50-1500/50]-[BC,BL,BM,BR,NZ]-Z-[C,D]-PNP3
E-MCH22-L10-[50-1500/50]-[BC,BL,BM,BR,NZ]-M75-[C,D]
E-MCH22-L10-[50-1500/50]-[BC,BL,BM,BR,NZ]-P75-[C,D]
E-MCH22-L10-[50-1500/50]-[BC,BL,BM,BR,NZ]-T75-[C,D]
E-MCH22-L10-[50-1500/50]-[BC,BL,BM,BR,NZ]-Y75-[C,D]
E-MCH22-L10-[50-1500/50]-[BC,BL,BM,BR,NZ]-Z-[C,D]
E-MCH22-L25-[50-1500/50]-[BC,BL,BM,BR,NZ]-M75-[C,D]
E-MCH22-L25-[50-1500/50]-[BC,BL,BM,BR,NZ]-P75-[C,D]
E-MCH22-L25-[50-1500/50]-[BC,BL,BM,BR,NZ]-T75-[C,D]
E-MCH22-L25-[50-1500/50]-[BC,BL,BM,BR,NZ]-Y75-[C,D]
E-MCH22-L25-[50-1500/50]-[BC,BL,BM,BR,NZ]-Z-[C,D]

Price	Minimum Order Qty.	Days to Ship	Lead	Lead	Effective Stroke (mm)	Motor Position	Motor Brand & Power	Sensor Position
-	1 Piece(s)	18 Day(s)	5	5	50 ～ 1500	BC Motor Direct Connection / BL Motor On Left Side / BM Motor On Lower Side / BR Motor On Right Side	M75 Mitsubishi 750W	C Motor Side / D Motor Opposite Side
-	1 Piece(s)	18 Day(s)	5	5	50 ～ 1500	BC Motor Direct Connection / BL Motor On Left Side / BM Motor On Lower Side / BR Motor On Right Side	P75 Panasonic 750W	C Motor Side / D Motor Opposite Side
-	1 Piece(s)	18 Day(s)	5	5	50 ～ 1500	BC Motor Direct Connection / BL Motor On Left Side / BM Motor On Lower Side / BR Motor On Right Side	T75 Delta 750W	C Motor Side / D Motor Opposite Side
-	1 Piece(s)	18 Day(s)	5	5	50 ～ 1500	BC Motor Direct Connection / BL Motor On Left Side / BM Motor On Lower Side / BR Motor On Right Side	Y75 Yaskawa 750W	C Motor Side / D Motor Opposite Side
-	1 Piece(s)	18 Day(s)	5	5	50 ～ 1500	BC Motor Direct Connection / BL Motor On Left Side / BM Motor On Lower Side / BR Motor On Right Side	Z Prepared by Customer	C Motor Side / D Motor Opposite Side
-	1 Piece(s)	18 Day(s)	10	10	50 ～ 1500	BC Motor Direct Connection / BL Motor On Left Side / BM Motor On Lower Side / BR Motor On Right Side	M75 Mitsubishi 750W	C Motor Side / D Motor Opposite Side
-	1 Piece(s)	18 Day(s)	10	10	50 ～ 1500	BC Motor Direct Connection / BL Motor On Left Side / BM Motor On Lower Side / BR Motor On Right Side	P75 Panasonic 750W	C Motor Side / D Motor Opposite Side
-	1 Piece(s)	18 Day(s)	10	10	50 ～ 1500	BC Motor Direct Connection / BL Motor On Left Side / BM Motor On Lower Side / BR Motor On Right Side	T75 Delta 750W	C Motor Side / D Motor Opposite Side
-	1 Piece(s)	18 Day(s)	10	10	50 ～ 1500	BC Motor Direct Connection / BL Motor On Left Side / BM Motor On Lower Side / BR Motor On Right Side	Y75 Yaskawa 750W	C Motor Side / D Motor Opposite Side
-	1 Piece(s)	18 Day(s)	10	10	50 ～ 1500	BC Motor Direct Connection / BL Motor On Left Side / BM Motor On Lower Side / BR Motor On Right Side	Z Prepared by Customer	C Motor Side / D Motor Opposite Side
-	1 Piece(s)	18 Day(s)	20	25	50 ～ 1500	BC Motor Direct Connection / BL Motor On Left Side / BM Motor On Lower Side / BR Motor On Right Side	M75 Mitsubishi 750W	C Motor Side / D Motor Opposite Side
-	1 Piece(s)	18 Day(s)	20	25	50 ～ 1500	BC Motor Direct Connection / BL Motor On Left Side / BM Motor On Lower Side / BR Motor On Right Side	P75 Panasonic 750W	C Motor Side / D Motor Opposite Side
-	1 Piece(s)	18 Day(s)	20	25	50 ～ 1500	BC Motor Direct Connection / BL Motor On Left Side / BM Motor On Lower Side / BR Motor On Right Side	T75 Delta 750W	C Motor Side / D Motor Opposite Side
-	1 Piece(s)	18 Day(s)	20	25	50 ～ 1500	BC Motor Direct Connection / BL Motor On Left Side / BM Motor On Lower Side / BR Motor On Right Side	Y75 Yaskawa 750W	C Motor Side / D Motor Opposite Side
-	1 Piece(s)	18 Day(s)	20	25	50 ～ 1500	BC Motor Direct Connection / BL Motor On Left Side / BM Motor On Lower Side / BR Motor On Right Side	Z Prepared by Customer	C Motor Side / D Motor Opposite Side

Basic Information

Type	Slider	Drive Method	Rolled Ball Screw	Main Body, Peripheral Components	Main Body
Positioning Repeatability(µm)	±10	Environmental Spec.	Clean Spec.	Cable	Not Provided
Number of Tables	1 pc.

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently asked question (FAQ)

Question: Is the sensor shipped after installation?: Answer: The sensor components are shipped together with the main unit and need to be installed by the customer upon arrival.
Question: Do actuators require regular maintenance?: Answer: Maintenance is required. Grease dry-out will cause the product to rust, and dry friction between the guide slider and the steel balls at high speeds will cause wear and tear, significantly reducing product life.
Question: Does the E-MTH series come with a motor?: Answer: No it doesn’t. Customers need to use the motor brand they trust, depending on the actual conditions. Be sure to ensure concentricity when mounting the motor, as a skewed motor shaft and screw will affect use.

Search by Category / Brand

Search by Category

How can we improve?