Leveling Mounts Unti-Slip Rubber Pad, Universal Type

Adjuster Bolt, Economy series Leveling Mounts Anti-Slip Universal Type
A leveling mount with high quality, cheap price and excellent cost performance
 

Dimensional Drawing of Adjuster Bolt

Specifications Overview of Adjuster Bolt

Product Features of Adjuster Bolt

The bottom of the product is hollow

Width D	Thread Specification M	Thread Length A	Body Height L	ℓ1	ℓ2	E	H	h	B	Allowable Load (KN)
65	12	100	137	8	10	24	8	6	19	4
		150	187
	16	100	139	10	13				24	4
		150	189
80	16	100	141	10	13	26	9	6	24	10
		150	191
	20	100	144	13	16				30	14
		150	194
		200	244
100	20	100	148	13	16	29	10	7	30	20
		150	198
		200	248
	24	100	150	15	19				36	25
		150	200
		200	250

Note 1) “Allowable load” in this specification table is for the vertical direction only

■MISUMI economy series load assurance
・The load of MISUMI economy series leveling mount is clearly indicated, and it is guaranteed by third-party testing for more assured use. Test results of allowable load according to GB standard

Recommended leveling mount installation method
On the premise of ensuring safety, raise the equipment with a forklift (light equipment can roll the equipment sideways) to a height that is convenient to screw into the inner teeth.
Screw in the leveling mount through threads. After assembling the required number of leveling mounts, lower the forklift and adjust horizontally.

Precautions
1. Check whether the screw can be mounted with female thread (it is recommended to re-tap after coating the threads).
2. The selection leveling mount should be screwed in more than half of the thread as far as possible (the shorter thread screwed in, the greater the bearing capacity).
3. For heavy equipment, it is recommended to add lubricating grease to threads for easy adjustment.