Can aluminum alloy profiles be cut to a specified length? What is the cutting precision?

Any length between 50 and 6000 (mm) can be specified (Can be specified down to 0.5mm increments) for cutting, and the cutting tolerance is within ±0.5mm.

What is the difference between the pre-mounted nut and post-mounted nut?

To install the nut first, you need to install it from the end of the profile first, and then fix it with an external screw. The post-mounted nut can be placed in the profile groove from the groove surface and fixed in conjunction with other accessories. Suitable for use when adding accessories to the profile.

Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 6:30 24/11/2024 to 4:30 (IST) 25/11/2024. We apologize for the inconvenience.
Please note that the MISUMI Pune office and warehouse will be closed on November 20th due to the state election.
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(1 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

LCF8-4080-4000

type Overall Length L (Effective Length) CAD Days to Ship

Specification/Dimensions

type
- LCF8-4080
Clear
Overall Length L (Effective Length)(mm)
4000
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

Same day

3 Day(s) or Less
Clear

Specify Alterations

4080 Aluminum Frame Slot Width 8 (LCF8-4080-4000)

Name: 4080 Aluminum Frame Slot Width 8
Brand: MISUMI
Price: 4700 INR
Availability: InStock

Check FAQ of this product (2 items)

Brand :

MISUMI

MiSUMi Economy

MISUMI

Order Qty :
Price :

---
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

(i)
Caution

European standard economic type new products, with different cross-sectional shapes and groove width sizes, can only be matched with European standard economic type special accessories starting with L.

Product Description

This is an economy item, The price is cheaper than the MISUMI standard product.

Product Overview

European standard Economy series aluminum alloy profiles with a groove width of 8mm, and a side length of 40mm.
Suitable for the structure of medium equipment hoods, cabinets and display bars.
4080 aluminum alloy profiles with multiple standard shapes are available.
European standard Economy series profile products are different from MISUMI existing profiles in section shapes, so they can only be used with European standard Economy series special accessories starting with L.

Dimensional Drawing

LCF8-4080

Type	Material	Surface Treatment
LCF8-4080	6063-T5	Clear Anodize

Specification Table

[Specifications]
The specifications table contains information such as the specified length range, unit, as well as meter weight and inertial intercept.

Specification Table

Part number		③ Overall Length L	Wall Thickness t (mm)	Weight
① Type	② Profile
				kg/m
LCF8	4080	50~4000 (1mm increments)	1.95	2.64

[!] 50 to 4000mm can be cut free of charge at any length specifi ed in units of 1mm.
[!] As it is a cheap and Economy series product, there may be small scars and defects on the surface. If you have higher requirements for the surface and end face, please select well.

Alterations

		Part number (① Type - ② Profile)		-	③ Overall Length L	-	(TPW...etc.)
		LCF8-4080		-	4000	-	TPW

Alteration Name	Machining content	Applicable installation example
End Tapping (Center hole)	Machining Tapped Holes on End Faces of aluminumframe
45-Degree Cutting	Cutting with 45-degree angle.
S Hole	Adding required holes for Pre-Assembly. Insertion Double Joint connections.
M Hole	Adding required holes for Post-Assembly. Insertion Double Joints, Center Joint connections.
Drilling Wrench Hole	Drilling Wrench holes in fixed positions for Blind joint connections.
Counterboring	Machining Counterbored holes at anyspecified positions.

Product Features

[Features]
The product has abundant specifications and types, high quality and low price, and exquisite in appearance.

[Intended Use]
Suitable for the structure of medium hoods, cabinets and display bars.

Precautions

4080 Aluminum Frame Slot Width 8 Accessories

The accessories for European standard aluminum profiles and MISUMI's existing Japanese standard aluminum profiles are not universal, so it is recommended to use European standard Economy series profile accessories beginning with L.

Accessories	Part Number 1	Part Number 2	Part Number 3
T-NUT	LNTN8-40-6	LNHRN8-40-8	LNTRNM8-40-6
Bracket	LBSBL8-4080	LBSB8-4040	LBSBK8-4040
End Cap	LCEC8-4080-B	LCEC8-4080-G	-
Slot Cover	LMUSB8	LMCSG8	LMCSB8
Join Plate/Screw	LBSF40	LBJB8-8-16	LBJ8-40
Other Aluminum Accessories, please contact with MISUMI to check.

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 45; 60

Part Number
LCF8-4080-4000

Part Number	Price	Minimum Order Qty.	Volume Discount	Days to Ship	Overall Length L (Effective Length) (mm)
	₹ 4,700.00	1 Piece(s)		Same day	4000

Basic Information

Standard Extrusion Size(mm)	80	Number of Slotted Surfaces	Four-Side Slots	Surface Treatment	Clear Anodize
Extrusion Type	Rectangle Shape	Surface Milled	Not Provided	Material	6063-T5
Extrusion Type	Standard	Weight(kg/m)	2.64	Wall Thickness (t)(mm)	1.95

Please check the type/dimensions/specifications of the part LCF8-4080-4000 in the 4080 Aluminum Frame Slot Width 8 series.

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently asked question (FAQ)

Question: Can aluminum alloy profiles be cut to a specified length? What is the cutting precision?: Answer: Any length between 50 and 6000 (mm) can be specified (Can be specified down to 0.5mm increments) for cutting, and the cutting tolerance is within ±0.5mm.
Question: What is the difference between the pre-mounted nut and post-mounted nut?: Answer: To install the nut first, you need to install it from the end of the profile first, and then fix it with an external screw. The post-mounted nut can be placed in the profile groove from the groove surface and fixed in conjunction with other accessories. Suitable for use when adding accessories to the profile.

Search by Category / Brand

Search by Category

How can we improve?