Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(37 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

SH-PSSAGS8-[25-800/1]-F[5-18/1]-M[5,6]-SC[0-787/1]

Shaft Dia. D Length L Threaded (Coarse) [M] Wrench Flats at One Location [SC] F Change Thread M to Fine Thread [MMS] Change Thread M to Fine Thread [MMC] type Cleaning Method CAD Days to Ship

Specification/Dimensions

Shaft Dia. D(Ø)
8

10

12

13

15

16

18

20

25

30

35

40

50
Clear
Length L(mm)
[25-800/1mm Unit(s)]
Clear
Threaded (Coarse) [M](㎜)
5

6

8

10

12

16

20

24

30
Clear
Wrench Flats at One Location [SC](㎜)
[0-800/1㎜ Unit(s)]
Clear
F(㎜)
[5-90/1㎜ Unit(s)]
Clear
Change Thread M to Fine Thread [MMS](㎜)
10

12

14

18
Clear
Change Thread M to Fine Thread [MMC](㎜)
6

8

10

12

15

17

20

25

30
Clear
type
- SH-PSSAGS
- SL-PSSAGS
Clear
Cleaning Method
- Degreasing
- Precision Cleaning
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

12 Day(s) or Less
Clear

Specify Alterations

[Clean & Pack] Shaft - One End Threaded with Undercut and Wrench Flats

Name: [Clean & Pack] Shaft - One End Threaded with Undercut and Wrench Flats
Brand: MISUMI
Availability: PreOrder

Click this image to zoom it.

Move the mouse over or click the image to zoom

Brand :

MISUMI

Part Number :

SH-PSSAGS8-[25-800/1]-F[5-18/1]-M[5,6]-SC[0-787/1]

SH-PSSAGS8-[25-800/1]-F[5-18/1]-MMC6-SC[0-787/1]

SH-PSSAGS10-[25-800/1]-F[5-24/1]-M[5,6,8]-SC[0-787/1]

SH-PSSAGS10-[25-800/1]-F[5-24/1]-MMC[6,8]-SC[0-787/1]

SH-PSSAGS12-[25-800/1]-F[5-30/1]-M[5,6,8,10]-SC[0-800/1]

SH-PSSAGS12-[25-800/1]-F[5-30/1]-MMC[6,8,10]-SC[0-800/1]

SH-PSSAGS12-[25-800/1]-F[5-30/1]-MMS10-SC[0-800/1]

SH-PSSAGS13-[25-800/1]-F[5-36/1]-M[5,6,8,10,12]-SC[0-800/1]

SH-PSSAGS13-[25-800/1]-F[5-36/1]-MMC[6,8,10]-SC[0-800/1]

SH-PSSAGS13-[25-800/1]-F[5-36/1]-MMS10-SC[0-800/1]

SH-PSSAGS15-[25-800/1]-F[5-36/1]-M[5,6,8,10,12]-SC[0-800/1]

SH-PSSAGS15-[25-800/1]-F[5-36/1]-MMC[6,8,10,12]-SC[0-800/1]

SH-PSSAGS15-[25-800/1]-F[5-36/1]-MMS[10,12]-SC[0-800/1]

SH-PSSAGS16-[25-800/1]-F[5-36/1]-M[5,6,8,10,12]-SC[0-800/1]

SH-PSSAGS16-[25-800/1]-F[5-36/1]-MMC[6,8,10,12]-SC[0-800/1]

SH-PSSAGS16-[25-800/1]-F[5-36/1]-MMS[10,12]-SC[0-800/1]

SH-PSSAGS18-[25-800/1]-F[5-48/1]-M[5,6,8,10,12,16]-SC[0-800/1]

SH-PSSAGS18-[25-800/1]-F[5-48/1]-MMC[6,8,10,12,15]-SC[0-800/1]

SH-PSSAGS18-[25-800/1]-F[5-48/1]-MMS[10,12,14]-SC[0-800/1]

SH-PSSAGS20-[25-800/1]-F[5-48/1]-M[5,6,8,10,12,16]-SC[0-800/1]

SH-PSSAGS8-[25-800/1]-F[5-18/1]-M[5,6]-SC[0-787/1]

Order Qty :
Price :

---
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

(i)
Caution

Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product. Please be careful about the application location and storage environment.

Product Description

Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

■Part Number for Clean & Pack Products

·Degreasing (Anti-rust single packing)	: Part Number SL-□□
·Precision cleaning (Degassing double packing)	: Part Number SH-□□
·Electrolytic polishing + precision cleaning (Degassing double packing)	: Part Number SHD-□□

Product Part Number	Cleaning Method	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Process
SL-□□	Degreasing	Anti-rust packing	Oil removal	General environment	Regular assembly process
					Post battery assembly process
SH-□□	Precision cleaning	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
					LCD-related post assembly process
					In-vehicle camera assembly process
SHD-□□	Electrolytic polishing + precision cleaning	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
					Liquid crystal deposition process
					Pre-OLED process

■Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.

Type	Body Material		Cleaning Method
D Tol. f8	[M] Material	[S]Surface Treatment	Cleaning Method	Cleaning Environment	Packaging Type	Packing Environment
SL-PSSAGS	SUS304	Hard Chrome Plating Plating Hardness: HV750 or more Plating Thickness: 10µ or more	Degreasing	General environment	Anti-rust packing	General environment
SH-PSSAGS			Precision cleaning	Class 1,000	Degassing double packing	Class 10

[!] Annealing required for wrench flats machining and shaft end threading (effective thread length + approx. 10 mm) may lower hardness. >> Here
[ ! ] L Dimension Tolerance, Circularity, Straightness, Perpendicularity, Concentricity and Changes in Hardness >> Here
[!] Products are packed by order quantity. Ex. If the order is for 20 pieces, they are packed in one package (incl. 20 pieces).
[ ! ] See the details of degreasing and precision cleaning shown at the bottom of the specification table.

Specification Table

Part Number	—	L	—	F	—	M	—	SC
SL-PSSAGS12	—	200	—	F20	—	M6	—	SC5
SH-PSSAGS20	—	450	—	F25	—	M12	—	SC10

D Tol.
D	f8
8	−0.013 −0.035
10	−0.013 −0.035
12	−0.016 −0.043
13
15
16
18
20	−0.020 −0.053
25
30
35	−0.025 −0.064
40
50

Part Number		1 mm Increments		Selection									Wrench Flats Dimensions			(Y) Max.	C
Type	D	L	F	M (Coarse)									SC	W	ℓ₁	(Y) Max.	C
D Tol. f8 SL-PSSAGS SH-PSSAGS	8	25 to 1095	5≦F≦M × 5	5	6								SC = 1 mm Increments [ ! ] SC+ℓ₁≦L [ ! ] SC≧0 >> Details of Wrench Flats Here	7	8	1100	0.5 or Less
	10	25 to 1195		5	6	8								8	8	1200
	12	25 to 1395		5	6	8	10							10	10	1400
	13	25 to 1395		5	6	8	10	12						11		1400
	15	25 to 1395		5	6	8	10	12						13		1400
	16	25 to 1395		5	6	8	10	12						14		1400
	18	25 to 1395		5	6	8	10	12	16					16		1400
	20	25 to 1395		5	6	8	10	12	16					17		1400	1.0 or Less
	25	25 to 1395		5	6	8	10	12	16	20	24			22		1400
	30	25 to 1495			6	8	10	12	16	20	24			27	15	1500
	35	25 to 1495					10	12	16	20	24	30		30	15	1500
	40	25 to 1495						12	16	20	24	30		36	20	1500
	50	25 to 1495	[ ! ] F - (g) ≥ Pitch × 3						16	20	24	30		41	20	1500

Undercut Dimensions for Fine Threads
M	Pitch	MC	(g)
5	0.8	4.1	2
6	1	4.4	2
8	1.25	6	3
10	1.5	7.7	3
12	1.75	9.4	4
16	2	13	4
20	2.5	16.4	5
24	3	19.6
30	3.5	25

Alteration Details

·See the tab below for alteration details.
* When selecting multiple alterations, the distance between machined areas should be 2 mm or more.

Alteration Code

Alteration Details

Fixed Dimension

Applicable Conditions

Ordering Example

LKC

Shaft - One End Threaded with Undercut and Cross-Drilled Hole / Wrench Flats, Related Image 1_Alteration Details

·L < 200 >> L ± 0.03
·200≦L<500→L±0.05
·L≧500→L±0.1

L dimension can be specified in 0.1 mm increments.

SAFS30-250.5-F20-M10-SC20-LKC

Shaft - One End Threaded with Undercut and Cross-Drilled Hole / Wrench Flats, Related Image 2_Alteration Details

D	h
8 to 18	1
20 to 40	2
50	3

FC, E = 1 mm Increments
D≦30:FC≦5 × D,
D≧35:FC≦3 × D
E = 0 or E ≥ 2

Not available in combination with WFC.

SAFS30-250-F20-M10-SC20-FC10-E8

WFC

Shaft - One End Threaded with Undercut and Cross-Drilled Hole / Wrench Flats, Related Image 3_Alteration Details

D	h
8 to 18	1
20 to 40	2
50	3

WFC, A, E = 1 mm Increments
D≦30:WFC≦5 × D,
D≧35:WFC≦3 × D
A(E) = 0 or A(E) ≥2

Cannot be machined coplanarly.
Not available in combination with FC.

SAFS30-250-F20-M10-SC20-WFC10-A8-E20

Shaft - One End Threaded with Undercut and Cross-Drilled Hole / Wrench Flats, Related Image 4_Alteration Details

D	W	ℓ₁	D	W	ℓ₁
8	7	8	20	17	10
10	8	8	25	22	10
12	10	10	30	27	15
13	11		35	30	15
15	13		40	36	20
16	14		50	41	20
18	16

Applicable to Shafts with Wrench Flats only.
SX = 1 mm Increments
SC+SX+ℓ₁X2<L
SX≧0

Cannot be machined coplanarly.

SAFS30-250-F20-M10-SC20-SX15

Shaft - One End Threaded with Undercut and Cross-Drilled Hole / Wrench Flats, Related Image 5_Alteration Details

D	b₁	h
10	6	0.5
12 to 20	6	1.0
25	10
30	12

Applicable to D = 10 to 30
RC = 1 mm Increments
RC + b₁ ≤ L
RC≧2

Not available in combination with WRC.

SAFS30-250-F20-M10-SC20-RC40

WRC

Shaft - One End Threaded with Undercut and Cross-Drilled Hole / Wrench Flats, Related Image 6_Alteration Details

D	b₁	h
10	6	0.5
12 to 20	6	1.0
25	10
30	12

Applicable to D = 10 to 30
WRC = 1 mm Increments
WRC + b₁ ≤ L
WRC (Y) ≧2

Cannot be machined coplanarly.
Not available in combination with RC.

SAFS30-250-F20-M10-SC20-WRC10-Y10

Shaft - One End Threaded with Undercut and Cross-Drilled Hole / Wrench Flats, Related Image 7_Alteration Details

Shaft - One End Threaded with Undercut and Cross-Drilled Hole / Wrench Flats, Related Image 9_Alteration Details

Only applicable to D = 12, 16, 20, 25 and 30.
KC, G = 1 mm Increments
b ≤ G ≤ 30, G ≤ L/3
L>500:2≦KC≦L/3
L<500:2≦KC≦500
M × 2<KC+F

SAFS30-250-F20-M10-SC20-KC10-G10

MMC
MMS

Shaft - One End Threaded with Undercut and Cross-Drilled Hole / Wrench Flats, Related Image 8_Alteration Details

Shaft - One End Threaded with Undercut and Cross-Drilled Hole / Wrench Flats, Related Image 10_Alteration Details

↑ Click to enlarge

[Bearing Nut Fine Thread Alteration]
·Specify "MMC"

[Cylinder Fine Thread Alteration]
·Specify "MMS"

SAFS30-250-F20-MMC15-SC20

Cleaning Process
·Degreasing (Part Number: SL-□□)

Working Environment: General environment


Alkaline warm pure water		Ultrasonic pure water cleaning after cleaning with pure water 　 *3 times		Dry		Anti-rust single packing

·Precision cleaning (Part Number: SH-□□)

		Working Environment: Class 1,000		Working Environment: Class 10

Hydrocarbon cleaning Ro water cleaning	Wash with pure water (10 MΩ·cm) after high-pressure water jet cleaning (Ro water)	Use pure water (13 MΩ·cm)	Use nitrogen blow	Conducted on a clean bench in a Class 10 clean environment

·Electrolytic polishing + precision cleaning (Part Number: SHD-□□)

			Working Environment: Class 1,000		Working Environment: Class 10

Hydrocarbon cleaning Ro water cleaning	Electrolytic polishing with an electrolytic polishing layer according to the material	Wash with pure water (10 MΩ·cm) after high-pressure water jet cleaning (Ro water)	Use warm pure water (13 MΩ·cm)	Use nitrogen blow	Conducted on a clean bench in a Class 10 clean environment

Packaging Example

For degreasing:
(Part Number: SL-□□)

For precision cleaning or electrolytic polishing + precision cleaning:
(Part Number: SH-□□/SHD-□□)

[ ! ]Both the first and second layer packaging are degassed.

Cleaning Effectiveness / Recommended Environment for Use

Cleaning Method	Product Part Number	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Use Case and Process
Degreasing	SL-□□	Anti-rust packing	Oil removal	General environment	Regular assembly process
Degreasing	SL-□□	Anti-rust packing	Oil removal	General environment	Post battery assembly process
Precision cleaning	SH-□□	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
					LCD-related post assembly process
					In-vehicle camera assembly process
Electrolytic polishing + precision cleaning	SHD-□□	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
					Liquid crystal deposition process
					Pre-OLED process

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 45; 60

Part Number
SH-PSSAGS8-[25-800/1]-F[5-18/1]-M[5,6]-SC[0-787/1]
SH-PSSAGS8-[25-800/1]-F[5-18/1]-MMC6-SC[0-787/1]
SH-PSSAGS10-[25-800/1]-F[5-24/1]-M[5,6,8]-SC[0-787/1]
SH-PSSAGS10-[25-800/1]-F[5-24/1]-MMC[6,8]-SC[0-787/1]
SH-PSSAGS12-[25-800/1]-F[5-30/1]-M[5,6,8,10]-SC[0-800/1]
SH-PSSAGS12-[25-800/1]-F[5-30/1]-MMC[6,8,10]-SC[0-800/1]
SH-PSSAGS12-[25-800/1]-F[5-30/1]-MMS10-SC[0-800/1]
SH-PSSAGS13-[25-800/1]-F[5-36/1]-M[5,6,8,10,12]-SC[0-800/1]
SH-PSSAGS13-[25-800/1]-F[5-36/1]-MMC[6,8,10]-SC[0-800/1]
SH-PSSAGS13-[25-800/1]-F[5-36/1]-MMS10-SC[0-800/1]
SH-PSSAGS15-[25-800/1]-F[5-36/1]-M[5,6,8,10,12]-SC[0-800/1]
SH-PSSAGS15-[25-800/1]-F[5-36/1]-MMC[6,8,10,12]-SC[0-800/1]
SH-PSSAGS15-[25-800/1]-F[5-36/1]-MMS[10,12]-SC[0-800/1]
SH-PSSAGS16-[25-800/1]-F[5-36/1]-M[5,6,8,10,12]-SC[0-800/1]
SH-PSSAGS16-[25-800/1]-F[5-36/1]-MMC[6,8,10,12]-SC[0-800/1]
SH-PSSAGS16-[25-800/1]-F[5-36/1]-MMS[10,12]-SC[0-800/1]
SH-PSSAGS18-[25-800/1]-F[5-48/1]-M[5,6,8,10,12,16]-SC[0-800/1]
SH-PSSAGS18-[25-800/1]-F[5-48/1]-MMC[6,8,10,12,15]-SC[0-800/1]
SH-PSSAGS18-[25-800/1]-F[5-48/1]-MMS[10,12,14]-SC[0-800/1]
SH-PSSAGS20-[25-800/1]-F[5-48/1]-M[5,6,8,10,12,16]-SC[0-800/1]
SH-PSSAGS20-[25-800/1]-F[5-48/1]-MMC[6,8,10,12,15,17]-SC[0-800/1]
SH-PSSAGS20-[25-800/1]-F[5-48/1]-MMS[10,12,14,18]-SC[0-800/1]
SH-PSSAGS25-[25-800/1]-F[5-72/1]-M[8,10,12,16,20,24]-SC[0-800/1]
SH-PSSAGS25-[25-800/1]-F[5-72/1]-MMC[8,10,12,15,17,20]-SC[0-800/1]
SH-PSSAGS25-[25-800/1]-F[5-72/1]-MMS[10,12,14,18]-SC[0-800/1]
SH-PSSAGS30-[25-800/1]-F[5-72/1]-M[8,10,12,16,20,24]-SC[0-800/1]
SH-PSSAGS30-[25-800/1]-F[5-72/1]-MMC[8,10,12,15,17,20,25]-SC[0-800/1]
SH-PSSAGS30-[25-800/1]-F[5-72/1]-MMS[10,12,14,18]-SC[0-800/1]
SH-PSSAGS35-[25-800/1]-F[5-90/1]-M[10,12,16,20,24,30]-SC[0-800/1]
SH-PSSAGS35-[25-800/1]-F[5-90/1]-MMC[10,12,15,17,20,25,30]-SC[0-800/1]
SH-PSSAGS35-[25-800/1]-F[5-90/1]-MMS[10,12,14,18]-SC[0-800/1]
SH-PSSAGS40-[25-800/1]-F[5-90/1]-M[12,16,20,24,30]-SC[0-800/1]
SH-PSSAGS40-[25-800/1]-F[5-90/1]-MMC[12,15,17,20,25,30]-SC[0-800/1]
SH-PSSAGS40-[25-800/1]-F[5-90/1]-MMS[12,14,18]-SC[0-800/1]
SH-PSSAGS50-[25-800/1]-F[5-90/1]-M[16,20,24,30]-SC[0-800/1]
SH-PSSAGS50-[25-800/1]-F[5-90/1]-MMC[15,17,20,25,30]-SC[0-800/1]
SH-PSSAGS50-[25-800/1]-F[5-90/1]-MMS[14,18]-SC[0-800/1]

Price	Minimum Order Qty.	Days to Ship	Shaft Dia. D (Ø)	Length L (mm)	Cleaning Method	Threaded (Coarse) [M] (㎜)	Wrench Flats at One Location [SC] (㎜)	F (㎜)	Change Thread M to Fine Thread [MMS] (㎜)	Change Thread M to Fine Thread [MMC] (㎜)
-	1 Piece(s)	12 Day(s) or more	8	25 ～ 800	Precision Cleaning	5 ～ 6	0 ～ 787	5 ～ 18	-	-
-	1 Piece(s)	12 Day(s) or more	8	25 ～ 800	Precision Cleaning	-	0 ～ 787	5 ～ 18	-	6
-	1 Piece(s)	12 Day(s) or more	10	25 ～ 800	Precision Cleaning	5 ～ 8	0 ～ 787	5 ～ 24	-	-
-	1 Piece(s)	12 Day(s) or more	10	25 ～ 800	Precision Cleaning	-	0 ～ 787	5 ～ 24	-	6 ～ 8
-	1 Piece(s)	12 Day(s) or more	12	25 ～ 800	Precision Cleaning	5 ～ 10	0 ～ 800	5 ～ 30	-	-
-	1 Piece(s)	12 Day(s) or more	12	25 ～ 800	Precision Cleaning	-	0 ～ 800	5 ～ 30	-	6 ～ 10
-	1 Piece(s)	12 Day(s) or more	12	25 ～ 800	Precision Cleaning	-	0 ～ 800	5 ～ 30	10	-
-	1 Piece(s)	12 Day(s) or more	13	25 ～ 800	Precision Cleaning	5 ～ 12	0 ～ 800	5 ～ 36	-	-
-	1 Piece(s)	12 Day(s) or more	13	25 ～ 800	Precision Cleaning	-	0 ～ 800	5 ～ 36	-	6 ～ 10
-	1 Piece(s)	12 Day(s) or more	13	25 ～ 800	Precision Cleaning	-	0 ～ 800	5 ～ 36	10	-
-	1 Piece(s)	12 Day(s) or more	15	25 ～ 800	Precision Cleaning	5 ～ 12	0 ～ 800	5 ～ 36	-	-
-	1 Piece(s)	12 Day(s) or more	15	25 ～ 800	Precision Cleaning	-	0 ～ 800	5 ～ 36	-	6 ～ 12
-	1 Piece(s)	12 Day(s) or more	15	25 ～ 800	Precision Cleaning	-	0 ～ 800	5 ～ 36	10 ～ 12	-
-	1 Piece(s)	12 Day(s) or more	16	25 ～ 800	Precision Cleaning	5 ～ 12	0 ～ 800	5 ～ 36	-	-
-	1 Piece(s)	12 Day(s) or more	16	25 ～ 800	Precision Cleaning	-	0 ～ 800	5 ～ 36	-	6 ～ 12
-	1 Piece(s)	12 Day(s) or more	16	25 ～ 800	Precision Cleaning	-	0 ～ 800	5 ～ 36	10 ～ 12	-
-	1 Piece(s)	12 Day(s) or more	18	25 ～ 800	Precision Cleaning	5 ～ 16	0 ～ 800	5 ～ 48	-	-
-	1 Piece(s)	12 Day(s) or more	18	25 ～ 800	Precision Cleaning	-	0 ～ 800	5 ～ 48	-	6 ～ 15
-	1 Piece(s)	12 Day(s) or more	18	25 ～ 800	Precision Cleaning	-	0 ～ 800	5 ～ 48	10 ～ 14	-
-	1 Piece(s)	12 Day(s) or more	20	25 ～ 800	Precision Cleaning	5 ～ 16	0 ～ 800	5 ～ 48	-	-
-	1 Piece(s)	12 Day(s) or more	20	25 ～ 800	Precision Cleaning	-	0 ～ 800	5 ～ 48	-	6 ～ 17
-	1 Piece(s)	12 Day(s) or more	20	25 ～ 800	Precision Cleaning	-	0 ～ 800	5 ～ 48	10 ～ 18	-
-	1 Piece(s)	12 Day(s) or more	25	25 ～ 800	Precision Cleaning	8 ～ 24	0 ～ 800	5 ～ 72	-	-
-	1 Piece(s)	12 Day(s) or more	25	25 ～ 800	Precision Cleaning	-	0 ～ 800	5 ～ 72	-	8 ～ 20
-	1 Piece(s)	12 Day(s) or more	25	25 ～ 800	Precision Cleaning	-	0 ～ 800	5 ～ 72	10 ～ 18	-
-	1 Piece(s)	12 Day(s) or more	30	25 ～ 800	Precision Cleaning	8 ～ 24	0 ～ 800	5 ～ 72	-	-
-	1 Piece(s)	12 Day(s) or more	30	25 ～ 800	Precision Cleaning	-	0 ～ 800	5 ～ 72	-	8 ～ 25
-	1 Piece(s)	12 Day(s) or more	30	25 ～ 800	Precision Cleaning	-	0 ～ 800	5 ～ 72	10 ～ 18	-
-	1 Piece(s)	12 Day(s) or more	35	25 ～ 800	Precision Cleaning	10 ～ 30	0 ～ 800	5 ～ 90	-	-
-	1 Piece(s)	12 Day(s) or more	35	25 ～ 800	Precision Cleaning	-	0 ～ 800	5 ～ 90	-	10 ～ 30
-	1 Piece(s)	12 Day(s) or more	35	25 ～ 800	Precision Cleaning	-	0 ～ 800	5 ～ 90	10 ～ 18	-
-	1 Piece(s)	12 Day(s) or more	40	25 ～ 800	Precision Cleaning	12 ～ 30	0 ～ 800	5 ～ 90	-	-
-	1 Piece(s)	12 Day(s) or more	40	25 ～ 800	Precision Cleaning	-	0 ～ 800	5 ～ 90	-	12 ～ 30
-	1 Piece(s)	12 Day(s) or more	40	25 ～ 800	Precision Cleaning	-	0 ～ 800	5 ～ 90	12 ～ 18	-
-	1 Piece(s)	12 Day(s) or more	50	25 ～ 800	Precision Cleaning	16 ～ 30	0 ～ 800	5 ～ 90	-	-
-	1 Piece(s)	12 Day(s) or more	50	25 ～ 800	Precision Cleaning	-	0 ～ 800	5 ～ 90	-	15 ～ 30
-	1 Piece(s)	12 Day(s) or more	50	25 ～ 800	Precision Cleaning	-	0 ～ 800	5 ～ 90	14 ～ 18	-

Basic Information

Basic Shape	Solid	End Shape (Left)	Threaded	End Shape (Right)	No Machining
Shaft End Perpendicularity	Perpendicularity (0.2)	Material	S45C	Heat Treatment	Not Provided
Surface Treatment	Hard Chrome Plating	Shaft Fit Tolerance	f8	Hardness	Not induction hardened
Material Certificate	Available	Material Certificate: Material	SUS304

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Search by Category / Brand

Search by Category

How can we improve?