[Clean & Pack] Shaft - Both Ends Tapped with Wrench Flats
Brand :
MISUMI
Caution
- Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product. Please be careful about the application location and storage environment.
Product Description
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.
■Part Number for Clean & Pack Products
| ·Degreasing (Anti-rust single packing) | : Part Number SL-□□ |
| ·Precision cleaning (Degassing double packing) | : Part Number SH-□□ |
| ·Electrolytic polishing + precision cleaning (Degassing double packing) | : Part Number SHD-□□ |
| Product Part Number | Cleaning Method | Packaging Type | Effects Compared to Uncleaned Product | Environment (Standard) | Process |
| SL-□□ | Degreasing | Anti-rust packing | Oil removal | General environment | Regular assembly process |
| Post battery assembly process | |||||
| SH-□□ | Precision cleaning | Degassing double packing | Oil removal Dust removal | Clean environment (Class 10 to 1,000) | Battery assembly process |
| LCD-related post assembly process | |||||
| In-vehicle camera assembly process | |||||
| SHD-□□ | Electrolytic polishing + precision cleaning | Degassing double packing | Oil removal Dust removal Outgas reduction | Vacuum environment Clean environment (Class 10 to 1,000) | Pre-semiconductor process |
| Liquid crystal deposition process | |||||
| Pre-OLED process |
■Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.
Shafts with Cross-Drilled Hole (8 ≤ D ≤ 30, L ≤ 500)
Shafts with Wrench Flats
[ ! ] For plated products, the surface roughness of D part is
; and for unplated products, it is 
.■L Dimension Tolerance
Shaft Outer Dia. g6, h5
(Hardening)
Unit: mm
Shaft Outer Dia. g6, h5
(Hardening)
| L | L Dimension Tolerance | |
|---|---|---|
| Over | or Less | |
| 14 | 30 | ±0.2 |
| 30 | 120 | ±0.3 |
| 120 | 400 | ±0.5 |
| 400 | 1000 | ±0.8 |
| 1000 | 1500 | ±1.2 |
Shaft Outer Dia. f8
(without hardening)
Unit: mm
(without hardening)
| L | L Dimension Tolerance | |
|---|---|---|
| Over | or Less | |
| 14 | 30 | ±0.2 |
| 30 | 120 | ±0.3 |
| 120 | 400 | ±0.5 |
| 400 | 1000 | ±0.8 |
| 1000 | 1500 | ±1.2 |
Unspecified Dimension
Tolerance
| Dimension Range | Dimension Tolerance | |
|---|---|---|
| Over | or Less | |
| 0.5 | 6 | ±0.1 |
| 6 | 30 | ±0.2 |
| 30 | 120 | ±0.3 |
| 120 | 400 | ±0.5 |
Class m (Medium Class).
[ ! ] The dimension tolerances for L, SC, and H conform to JIS B 0405 class m.
[ ! ] For the change in L dimension tolerance, consider the alteration LKC shown below.
| Type | [ M ] Material | [ H ] Hardness | [ S ] Surface Treatment | Cleaning Method | ||||||
| With Wrench Flats | With Cross-Drilled Hole | |||||||||
| D Tolerance f8 | D Tolerance g6 | D Tolerance h5 | Cleaning Method | Cleaning Environment | Packaging Type | Packing Environment | ||||
| SL-PSSFGZ | - | - | - | SUS304 | - | Hard Chrome Plating Plating Hardness: HV750 or more Plating Thickness: 10 µ or more | Degreasing | General environment | Anti-rust packing | General environment |
| SH-PSSFGZ | Precision cleaning | Class 1,000 | Degassing double packing | Class 10 | ||||||
| - | SL-SSFJZ | SL-SSFUZ | SL-SSFHZ | SUS440C or 13Cr Stainless Steel | Induction Hardening SUJ2 Equivalent 58 HRC or more SUS440C or 13Cr Stainless Steel 56 HRC or more | - | Degreasing | General environment | Anti-rust packing | General environment |
| SH-SSFJZ | SH-SSFUZ | SH-SSFHZ | Precision cleaning | Class 1,000 | Degassing double packing | Class 10 | ||||
| - | SL-PSSFJZ | SL-PSSFUZ | SL-PSSFHZ | SUS440C or 13Cr Stainless Steel | Hard Chrome Plating Plating Hardness: HV750 or more Plating Thickness: 5 µ or more | Degreasing | General environment | Anti-rust packing | General environment | |
| SH-PSSFJZ | SH-PSSFUZ | SH-PSSFHZ | Precision cleaning | Class 1,000 | Degassing double packing | Class 10 | ||||
| - | SL-RSFJZ | - | SL-RSFHZ | SUJ2 Equivalent | Low Temperature Black Chrome Plating | Degreasing | General environment | Anti-rust packing | General environment | |
| SH-RSFJZ | SH-RSFHZ | Precision cleaning | Class 1,000 | Degassing double packing | Class 10 | |||||
| - | SL-RSSFJZ | - | SL-RSSFHZ | SUS440C or 13Cr Stainless Steel | Degreasing | General environment | Anti-rust packing | General environment | ||
| SH-RSSFJZ | SH-RSSFHZ | Precision cleaning | Class 1,000 | Degassing double packing | Class 10 | |||||
[ ! ] Low temperature black chrome plated products made of SUS440C or 13Cr stainless steel have identification grooves.
[ ! ] Cross-drilled hole areas may be out of O.D. tolerances due to annealing-induced deformation.
[ ! ] For details on the corrosion resistance of SUJ2, SUS440C, and 13Cr stainless steel, see below▼.
[ ! ] Products are packed by order quantity. Ex. If the order is for 20 pieces, they are packed in one package (incl. 20 pieces).
[ ! ] See the
details of degreasing and precision cleaning shown at the bottom of the specification table.
· Shafts with Cross-Drilled Hole are suitable for narrow work space.
Application Example
· Shafts with Cross-Drilled Hole are suitable for narrow work space.