Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(272 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

SHD-PSSFUW50-[65-800/1]-MSC[12,14,18]-N[12,16,20,24,30]-N[12,16,20,24,30]

Material Heat Treatment Shaft Dia. D Length L Shaft Fit Tolerance Cleaning Method Hardness Change Tapped Thread N to Fine Thread [NSC] Coarse Tapped [ND] Depth=Nx3 Change Tapped Thread M to Fine Thread [MSC] Coarse Tapped [N] Depth=Nx2 Coarse Tapped [M] Depth=Mx2 Coarse Tapped [MD] Depth=Mx3 type CAD Days to Ship

Specification/Dimensions

Material
- Steel
  - S45C
- Stainless Steel
  - SUS440C or 13Cr Stainless Steel
Clear
Heat Treatment
- Not Provided
- Induction Hardened
Clear
Shaft Dia. D(Ø)
4

5

6

8

10

12

13

15

16

18

20

25

30

35

40

50
Clear
Length L(mm)
[15-800/1mm Unit(s)]
Clear
Shaft Fit Tolerance
f8

h5
Clear
Cleaning Method
- Degreasing
- Precision Cleaning
- Electrolytic Polishing + Precision Cleaning
Clear
Hardness
- Induction Hardened (56HRC or more)
- Not induction hardened
Clear
Change Tapped Thread N to Fine Thread [NSC](㎜)
8

10

12

14

18
Clear
Coarse Tapped [ND] Depth=Nx3(㎜)
6

8

10

12

16

20
Clear
Change Tapped Thread M to Fine Thread [MSC](㎜)
8

10

12

14

18
Clear
Coarse Tapped [N] Depth=Nx2(㎜)
3

4

5

6

8

10

12

16

20

24

30
Clear
Coarse Tapped [M] Depth=Mx2(㎜)
3

4

5

6

8

10

12

16

20

24

30
Clear
Coarse Tapped [MD] Depth=Mx3(㎜)
6

8

10

12

16

20
Clear
type
- SH-PSSFGW
- SHD-PSSFUW
- SL-PSSFGW
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

11 Day(s) or Less

12 Day(s) or Less
Clear

Specify Alterations

[Clean & Pack] Shaft - Both Ends Tapped (Part Number)

Name: [Clean & Pack] Shaft - Both Ends Tapped
Brand: MISUMI
Availability: PreOrder

Click this image to zoom it.

Move the mouse over or click the image to zoom

Brand :

MISUMI

Part Number :

SHD-PSSFUW50-[65-800/1]-MSC[12,14,18]-N[12,16,20,24,30]-N[12,16,20,24,30]

SHD-PSSFUW50-[65-800/1]-MSC[12,14,18]-NSC[12,14,18]-N[12,16,20,24,30]

SL-PSSFGW6-[15-800/1]-M3-N3

SL-PSSFGW8-[15-800/1]-M[3,4,5]-N[3,4,5]

SL-PSSFGW10-[15-800/1]-M[3,4,5,6]-N[3,4,5,6]

SL-PSSFGW10-[15-800/1]-M[3,4,5,6]-ND6

SL-PSSFGW10-[15-800/1]-MD6-N[3,4,5,6]

SL-PSSFGW10-[15-800/1]-MD6-ND6

SL-PSSFGW12-[15-800/1]-M[4,5,6,8]-N[4,5,6,8]

SL-PSSFGW12-[15-800/1]-M[4,5,6,8]-ND[6,8]

SL-PSSFGW12-[15-800/1]-M[4,5,6,8]-NSC8

SL-PSSFGW12-[15-800/1]-MD[6,8]-N[4,5,6,8]

SL-PSSFGW12-[15-800/1]-MD[6,8]-ND[6,8]

SL-PSSFGW12-[15-800/1]-MD[6,8]-NSC8

SL-PSSFGW12-[15-800/1]-MSC8-N[4,5,6,8]

SL-PSSFGW12-[15-800/1]-MSC8-ND[6,8]

SL-PSSFGW12-[15-800/1]-MSC8-NSC8

SL-PSSFGW13-[15-800/1]-M[4,5,6,8]-N[4,5,6,8]

SL-PSSFGW13-[15-800/1]-M[4,5,6,8]-ND[6,8]

SL-PSSFGW13-[15-800/1]-M[4,5,6,8]-NSC8

SHD-PSSFUW50-[65-800/1]-MSC[12,14,18]-N[12,16,20,24,30]-N[12,16,20,24,30]

Order Qty :
Price :

---
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

(i)
Caution

Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product. Please be careful about the application location and storage environment.

Product Description

Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number. This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.

Type		Body Material	Cleaning Method
D Tol. f8	Material	Surface Treatment	Cleaning Method	Cleaning Environment	Packaging Type	Packing Environment
SL-PSSFGW	SUS304	Hard Chrome Plating Plating Hardness: HV750 or more Plating Thickness: 10µ or more	Degreasing	General environment	Anti-rust packing	General environment
SH-PSSFGW			Precision cleaning	Class 1,000	Degassing double packing	Class 10

[ ! ]When D ≤ 5, the entire surface may be hardened.
[!] Annealing may lower hardness at shaft end machined areas (effective thread length + approx. 10 mm). >> Here
[ ! ] L Dimension Tolerance, Circularity, Straightness, Perpendicularity, Concentricity and Changes in Hardness >> Here
[!] Products are packed by order quantity. Ex. If the order is for 20 pieces, they are packed in one package (incl. 20 pieces).
[ ! ] See the details of degreasing and precision cleaning shown at the bottom of the specification table.

Specification Table

Part Number	—	L	—	M	—	N
SL-PSSFUW8	—	200	—	M4	—	N4
SH-PSSFGW20	—	500	—	M6	—	N10

D Tol.
D	h5	f8
4	0 −0.005	—
5
6		−0.010 −0.028

8	0 −0.006	−0.013 −0.035
10
12	0 −0.008	−0.016 −0.043
13
15
16
18
20	0 −0.009	−0.020 −0.053
25
30
35	0 −0.011	−0.025 −0.064
40
50

Part Number		L	M (Coarse), N (Coarse) Selection													C
Type	D	1 mm Increments	M (Coarse), N (Coarse) Selection													C
D Tolerance h5 SL-PSSFUW SH-PSSFUW D Tol. f8 SL-PSSFGW SH-PSSFGW	4	20 to 300	2													0.2 or less
	5	20 to 400		2.6	3											0.2 or less
	6	15 to 900			3											0.5 or Less
	8	15 to 1100			3	4	5
	10	15 to 1200			3	4	5	6
	12	15 to 1400				4	5	6	8
	13	15 to 1400				4	5	6	8
	15	15 to 1400				4	5	6	8	10
	16	16 to 1400				4	5	6	8	10
	18	30 to 1400				4	5	6	8	10	12
	20	30 to 1400				4	5	6	8	10	12					1.0 or less
	25	35 to 1400				4	5	6	8	10	12	16
	30	35 to 1500						6	8	10	12	16	20
	35	35 to 1500							8	10	12	16	20	24
	40	50 to 1500								10	12	16	20	24	30
	50	65 to 1500									12	16	20	24	30

[ ! ] The overall length L requires M × 2 + N × 2 ≤ L.
[ ! ] When M × 2.5 + 4 + N × 2.5 + 4 ≥ L, the tap pilot hole is through, and the priority is given to the large tap effective length, so the small tap effective length becomes shorter.

Alteration Details

·See below for alteration.
* When selecting multiple alterations, the distance between machined areas should be 2 mm or more.

Alterations
Code

Alteration Details

Fixed Dimension

Applicable Conditions

Ordering Example

LKC

Shaft - Both Ends Tapped, Related Image 1_Alteration Details

·L < 200 >> L ± 0.03
·200≦L<500→L±0.05
·L≧500→L±0.1

·L Dimension can be specified in 0.1 mm increments.

SFJW30-500.5-M8-N10-LKC

WSC

Shaft - Both Ends Tapped, Related Image 2_Alteration Details

D	W	ℓ₁	D	W	ℓ₁
6	5	8	18	16	10
8	7		20	17
10	8		25	22
12	10	10	30	27	15
13	11		35	30	15
15	13		40	36	20
16	14		50	41	20

WSC, X = 1 mm Increments
WSC+X+ℓ₁ × 2<L
WSC (X) ≧0

·Applicable to D = 6 or more
Cannot be machined coplanarly.
Not available in combination with FC.

SFJW30-500-M8-N10-WSC12-X8

Shaft - Both Ends Tapped, Related Image 3_Alteration Details

D	h
4 to 5	0.5
6 to 18	1
20 to 40	2
50	3

FC, A = 1 mm Increments
D≦30:FC≦5 × D,
D≧35:FC≦3 × D
A = 0 or A ≥ 2

Not available in combination with WFC.

SFJW30-500-M8-N10-FC10-A8

WFC

Shaft - Both Ends Tapped, Related Image 4_Alteration Details

D	h
4 to 5	0.5
6 to 18	1
20 to 40	2
50	3

WFC, A, E = 1 mm Increments
D≦30:WFC≦5 × D,
D≧35:WFC≦3 × D
A(E) = 0 or A(E) ≥2

Cannot be machined coplanarly.
Not available in combination with FC.

SFJW30-500-M8-N10-WFC8-A8-E2

Shaft - Both Ends Tapped, Related Image 5_Alteration Details

Shaft - Both Ends Tapped, Related Image 14_Alteration Details

KC, G = 1 mm Increments
b ≤ G ≤ 30, G ≤ L/3
L>500:2≦KC≦L/3
L<500:2≦KC≦500
M × 2<KC+F

·Only applicable to D = 12, 16, 20, 25 and 30.
This alteration cannot be applied to any tapped area (M x 2.5 + 4).

SFJW30-500-M8-N10-KC10-G10

WKC

Shaft - Both Ends Tapped, Related Image 6_Alteration Details

KC, WKC, G, C = 1 mm Increments
b ≤ G(C) ≤ 30, G(C) ≤ L/3
L>500:2≦KC (WKC) ≦L/3
L<500:2≦KC (WKC) ≦500
G+C≦L/3
M × 2<KC+F

·Only applicable to D = 12, 16, 20, 25 and 30.
Cannot be machined coplanarly.
This alteration cannot be applied to any tapped area (M x 2.5 + 4).

SFJW30-500-M8-N10-KC10-G10-WKC10-C8

MSC
NSC

Shaft - Both Ends Tapped, Related Image 7_Alteration Details

D	MSC·NSC
12·13	8
15·16	8	10
18	8	10	12
20	8	10	12	14
25 to 35	8	10	12	14	18
40		10	12	14	18
50			12	14	18
Pitch	1.0	1.25	1.5

·Applicable to D = 12 or more
Not available in combination with MD/ND.

SFJW30-500-MSC14-NSC14

Shaft - Both Ends Tapped, Related Image 8_Alteration Details

D	b₁	h
10	6	0.5
12 to 20	6	1.0
25	10
30	12

RC = 1 mm Increments
RC + b₁ ≤ L
RC≧2

·Applicable to D = 10 to 30
Not available in combination with WRC.

SFJW30-500-M8-N10-RC10

WRC

Shaft - Both Ends Tapped, Related Image 9_Alteration Details

D	b₁	h
10	6	0.5
12 to 20	6	1.0
25	10
30	12

WRC = 1 mm Increments
WRC + b₁ ≤ L
WRC (Y) ≧2

·Applicable to D = 10 to 30
Cannot be machined coplanarly.
Not available in combination with RC.

SFJW30-500-M8-N10-WRC10-Y10

MD
ND

Shaft - Both Ends Tapped, Related Image 10_Alteration Details

·Applicable to D = 10 to 30 and M (N) = 6 to 20
One End Tapped: MD × 3.5+4≦L
Both Ends Tapped: MD × 3.5+4+ND × 3.5+4≦L

Not available in combination with KC/WKC/MSC/NSC.

SFJW30-500-MD8-ND8

Cleaning Process
·Degreasing (Part Number: SL-□□)

Working Environment: General environment


Alkaline warm pure water		Ultrasonic pure water cleaning after cleaning with pure water 　 *3 times		Dry		Anti-rust single packing

·Precision cleaning (Part Number: SH-□□)

		Working Environment: Class 1,000		Working Environment: Class 10

Hydrocarbon cleaning Ro water cleaning	Wash with pure water (10 MΩ·cm) after high-pressure water jet cleaning (Ro water)	Use pure water (13 MΩ·cm)	Use nitrogen blow	Conducted on a clean bench in a Class 10 clean environment

·Electrolytic polishing + precision cleaning (Part Number: SHD-□□)

			Working Environment: Class 1,000		Working Environment: Class 10

Hydrocarbon cleaning Ro water cleaning	Electrolytic polishing with an electrolytic polishing layer according to the material	Wash with pure water (10 MΩ·cm) after high-pressure water jet cleaning (Ro water)	Use warm pure water (13 MΩ·cm)	Use nitrogen blow	Conducted on a clean bench in a Class 10 clean environment

Packaging Example

For degreasing:
(Part Number: SL-□□)

For precision cleaning or electrolytic polishing + precision cleaning:
(Part Number: SH-□□/SHD-□□)

[ ! ]Both the first and second layer packaging are degassed.

Cleaning Effectiveness / Recommended Environment for Use

Cleaning Method	Product Part Number	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Use Case and Process
Degreasing	SL-□□	Anti-rust packing	Oil removal	General environment	Regular assembly process
Degreasing	SL-□□	Anti-rust packing	Oil removal	General environment	Post battery assembly process
Precision cleaning	SH-□□	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
					LCD-related post assembly process
					In-vehicle camera assembly process
Electrolytic polishing + precision cleaning	SHD-□□	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
					Liquid crystal deposition process
					Pre-OLED process

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 60; 90

Part Number
SHD-PSSFUW50-[65-800/1]-MSC[12,14,18]-N[12,16,20,24,30]-N[12,16,20,24,30]
SHD-PSSFUW50-[65-800/1]-MSC[12,14,18]-NSC[12,14,18]-N[12,16,20,24,30]
SL-PSSFGW6-[15-800/1]-M3-N3
SL-PSSFGW8-[15-800/1]-M[3,4,5]-N[3,4,5]
SL-PSSFGW10-[15-800/1]-M[3,4,5,6]-N[3,4,5,6]
SL-PSSFGW10-[15-800/1]-M[3,4,5,6]-ND6
SL-PSSFGW10-[15-800/1]-MD6-N[3,4,5,6]
SL-PSSFGW10-[15-800/1]-MD6-ND6
SL-PSSFGW12-[15-800/1]-M[4,5,6,8]-N[4,5,6,8]
SL-PSSFGW12-[15-800/1]-M[4,5,6,8]-ND[6,8]
SL-PSSFGW12-[15-800/1]-M[4,5,6,8]-NSC8
SL-PSSFGW12-[15-800/1]-MD[6,8]-N[4,5,6,8]
SL-PSSFGW12-[15-800/1]-MD[6,8]-ND[6,8]
SL-PSSFGW12-[15-800/1]-MD[6,8]-NSC8
SL-PSSFGW12-[15-800/1]-MSC8-N[4,5,6,8]
SL-PSSFGW12-[15-800/1]-MSC8-ND[6,8]
SL-PSSFGW12-[15-800/1]-MSC8-NSC8
SL-PSSFGW13-[15-800/1]-M[4,5,6,8]-N[4,5,6,8]
SL-PSSFGW13-[15-800/1]-M[4,5,6,8]-ND[6,8]
SL-PSSFGW13-[15-800/1]-M[4,5,6,8]-NSC8
SL-PSSFGW13-[15-800/1]-MD[6,8]-N[4,5,6,8]
SL-PSSFGW13-[15-800/1]-MD[6,8]-ND[6,8]
SL-PSSFGW13-[15-800/1]-MD[6,8]-NSC8
SL-PSSFGW13-[15-800/1]-MSC8-N[4,5,6,8]
SL-PSSFGW13-[15-800/1]-MSC8-ND[6,8]
SL-PSSFGW13-[15-800/1]-MSC8-NSC8
SL-PSSFGW15-[15-800/1]-M[4,5,6,8,10]-N[4,5,6,8,10]
SL-PSSFGW15-[15-800/1]-M[4,5,6,8,10]-ND[6,8,10]
SL-PSSFGW15-[15-800/1]-M[4,5,6,8,10]-NSC[8,10]
SL-PSSFGW15-[15-800/1]-MD[6,8,10]-N[4,5,6,8,10]
SL-PSSFGW15-[15-800/1]-MD[6,8,10]-ND[6,8,10]
SL-PSSFGW15-[15-800/1]-MD[6,8,10]-NSC[8,10]
SL-PSSFGW15-[15-800/1]-MSC[8,10]-N[4,5,6,8,10]
SL-PSSFGW15-[15-800/1]-MSC[8,10]-ND[6,8,10]
SL-PSSFGW15-[15-800/1]-MSC[8,10]-NSC[8,10]
SL-PSSFGW16-[16-800/1]-M[4,5,6,8,10]-N[4,5,6,8,10]
SL-PSSFGW16-[16-800/1]-M[4,5,6,8,10]-ND[6,8,10]
SL-PSSFGW16-[16-800/1]-M[4,5,6,8,10]-NSC[8,10]
SL-PSSFGW16-[16-800/1]-MD[6,8,10]-N[4,5,6,8,10]
SL-PSSFGW16-[16-800/1]-MD[6,8,10]-ND[6,8,10]
SL-PSSFGW16-[16-800/1]-MD[6,8,10]-NSC[8,10]
SL-PSSFGW16-[16-800/1]-MSC[8,10]-N[4,5,6,8,10]
SL-PSSFGW16-[16-800/1]-MSC[8,10]-ND[6,8,10]
SL-PSSFGW16-[16-800/1]-MSC[8,10]-NSC[8,10]
SL-PSSFGW18-[30-800/1]-M[4,5,6,8,10,12]-N[4,5,6,8,10,12]
SL-PSSFGW18-[30-800/1]-M[4,5,6,8,10,12]-ND[6,8,10,12]
SL-PSSFGW18-[30-800/1]-M[4,5,6,8,10,12]-NSC[8,10,12]
SL-PSSFGW18-[30-800/1]-MD[6,8,10,12]-N[4,5,6,8,10,12]
SL-PSSFGW18-[30-800/1]-MD[6,8,10,12]-ND[6,8,10,12]
SL-PSSFGW18-[30-800/1]-MD[6,8,10,12]-NSC[8,10,12]
SL-PSSFGW18-[30-800/1]-MSC[8,10,12]-N[4,5,6,8,10,12]
SL-PSSFGW18-[30-800/1]-MSC[8,10,12]-ND[6,8,10,12]
SL-PSSFGW18-[30-800/1]-MSC[8,10,12]-NSC[8,10,12]
SL-PSSFGW20-[30-800/1]-M[4,5,6,8,10,12]-N[4,5,6,8,10,12]
SL-PSSFGW20-[30-800/1]-M[4,5,6,8,10,12]-ND[6,8,10,12]
SL-PSSFGW20-[30-800/1]-M[4,5,6,8,10,12]-NSC[8,10,12,14]
SL-PSSFGW20-[30-800/1]-MD[6,8,10,12]-N[4,5,6,8,10,12]
SL-PSSFGW20-[30-800/1]-MD[6,8,10,12]-ND[6,8,10,12]
SL-PSSFGW20-[30-800/1]-MD[6,8,10,12]-NSC[8,10,12,14]
SL-PSSFGW20-[30-800/1]-MSC[8,10,12,14]-N[4,5,6,8,10,12]
SL-PSSFGW20-[30-800/1]-MSC[8,10,12,14]-ND[6,8,10,12]
SL-PSSFGW20-[30-800/1]-MSC[8,10,12,14]-NSC[8,10,12,14]
SL-PSSFGW25-[35-800/1]-M[4,5,6,8,10,12,16]-N[4,5,6,8,10,12,16]
SL-PSSFGW25-[35-800/1]-M[4,5,6,8,10,12,16]-ND[6,8,10,12,16]
SL-PSSFGW25-[35-800/1]-M[4,5,6,8,10,12,16]-NSC[8,10,12,14,18]
SL-PSSFGW25-[35-800/1]-MD[6,8,10,12,16]-N[4,5,6,8,10,12,16]
SL-PSSFGW25-[35-800/1]-MD[6,8,10,12,16]-ND[6,8,10,12,16]
SL-PSSFGW25-[35-800/1]-MD[6,8,10,12,16]-NSC[8,10,12,14,18]
SL-PSSFGW25-[35-800/1]-MSC[8,10,12,14,18]-N[4,5,6,8,10,12,16]
SL-PSSFGW25-[35-800/1]-MSC[8,10,12,14,18]-ND[6,8,10,12,16]
SL-PSSFGW25-[35-800/1]-MSC[8,10,12,14,18]-NSC[8,10,12,14,18]
SL-PSSFGW30-[35-800/1]-M[6,8,10,12,16,20]-N[6,8,10,12,16,20]
SL-PSSFGW30-[35-800/1]-M[6,8,10,12,16,20]-ND[6,8,10,12,16,20]
SL-PSSFGW30-[35-800/1]-M[6,8,10,12,16,20]-NSC[8,10,12,14,18]
SL-PSSFGW30-[35-800/1]-MD[6,8,10,12,16,20]-N[6,8,10,12,16,20]
SL-PSSFGW30-[35-800/1]-MD[6,8,10,12,16,20]-ND[6,8,10,12,16,20]
SL-PSSFGW30-[35-800/1]-MD[6,8,10,12,16,20]-NSC[8,10,12,14,18]
SL-PSSFGW30-[35-800/1]-MSC[8,10,12,14,18]-N[6,8,10,12,16,20]
SL-PSSFGW30-[35-800/1]-MSC[8,10,12,14,18]-ND[6,8,10,12,16,20]
SL-PSSFGW30-[35-800/1]-MSC[8,10,12,14,18]-NSC[8,10,12,14,18]
SL-PSSFGW35-[35-800/1]-M[8,10,12,16,20,24]-N[8,10,12,16,20,24]
SL-PSSFGW35-[35-800/1]-M[8,10,12,16,20,24]-NSC[8,10,12,14,18]
SL-PSSFGW35-[35-800/1]-MSC[8,10,12,14,18]-N[8,10,12,16,20,24]
SL-PSSFGW35-[35-800/1]-MSC[8,10,12,14,18]-NSC[8,10,12,14,18]
SL-PSSFGW40-[50-800/1]-M[10,12,16,20,24,30]-N[10,12,16,20,24,30]
SL-PSSFGW40-[50-800/1]-M[10,12,16,20,24,30]-NSC[10,12,14,18]
SL-PSSFGW40-[50-800/1]-MSC[10,12,14,18]-N[10,12,16,20,24,30]
SL-PSSFGW40-[50-800/1]-MSC[10,12,14,18]-NSC[10,12,14,18]
SL-PSSFGW50-[65-800/1]-M[12,16,20,24,30]-N[12,16,20,24,30]
SL-PSSFGW50-[65-800/1]-M[12,16,20,24,30]-NSC[12,14,18]

Price	Minimum Order Qty.	Days to Ship	Material	Heat Treatment	Shaft Dia. D (Ø)	Length L (mm)	Shaft Fit Tolerance	Cleaning Method	Hardness	Change Tapped Thread N to Fine Thread [NSC] (㎜)	Coarse Tapped [ND] Depth=Nx3 (㎜)	Change Tapped Thread M to Fine Thread [MSC] (㎜)	Coarse Tapped [N] Depth=Nx2 (㎜)	Coarse Tapped [M] Depth=Mx2 (㎜)	Coarse Tapped [MD] Depth=Mx3 (㎜)	Material Certificate: Material	Material Certificate: Surface Treatment
-	1 Piece(s)	12 Day(s) or more	[Stainless Steel] SUS440C or 13Cr Stainless Steel	Induction Hardened	50	65 ～ 800	h5	Electrolytic Polishing + Precision Cleaning	Induction Hardened (56HRC or more)	-	-	12 ～ 18	12 ～ 30	-	-	SUS440C or 13Cr Stainless Steel	Hard Chrome Plating: Plating hardness HV750 or more, Plating thickness 5µ or more
-	1 Piece(s)	12 Day(s) or more	[Stainless Steel] SUS440C or 13Cr Stainless Steel	Induction Hardened	50	65 ～ 800	h5	Electrolytic Polishing + Precision Cleaning	Induction Hardened (56HRC or more)	12 ～ 18	-	12 ～ 18	-	-	-	SUS440C or 13Cr Stainless Steel	Hard Chrome Plating: Plating hardness HV750 or more, Plating thickness 5µ or more
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	6	15 ～ 800	f8	Degreasing	Not induction hardened	-	-	-	3	3	-	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	8	15 ～ 800	f8	Degreasing	Not induction hardened	-	-	-	3 ～ 5	3 ～ 5	-	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	10	15 ～ 800	f8	Degreasing	Not induction hardened	-	-	-	3 ～ 6	3 ～ 6	-	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	10	15 ～ 800	f8	Degreasing	Not induction hardened	-	6	-	-	3 ～ 6	-	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	10	15 ～ 800	f8	Degreasing	Not induction hardened	-	-	-	3 ～ 6	-	6	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	10	15 ～ 800	f8	Degreasing	Not induction hardened	-	6	-	-	-	6	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	12	15 ～ 800	f8	Degreasing	Not induction hardened	-	-	-	4 ～ 8	4 ～ 8	-	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	12	15 ～ 800	f8	Degreasing	Not induction hardened	-	6 ～ 8	-	-	4 ～ 8	-	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	12	15 ～ 800	f8	Degreasing	Not induction hardened	8	-	-	-	4 ～ 8	-	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	12	15 ～ 800	f8	Degreasing	Not induction hardened	-	-	-	4 ～ 8	-	6 ～ 8	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	12	15 ～ 800	f8	Degreasing	Not induction hardened	-	6 ～ 8	-	-	-	6 ～ 8	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	12	15 ～ 800	f8	Degreasing	Not induction hardened	8	-	-	-	-	6 ～ 8	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	12	15 ～ 800	f8	Degreasing	Not induction hardened	-	-	8	4 ～ 8	-	-	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	12	15 ～ 800	f8	Degreasing	Not induction hardened	-	6 ～ 8	8	-	-	-	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	12	15 ～ 800	f8	Degreasing	Not induction hardened	8	-	8	-	-	-	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	13	15 ～ 800	f8	Degreasing	Not induction hardened	-	-	-	4 ～ 8	4 ～ 8	-	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	13	15 ～ 800	f8	Degreasing	Not induction hardened	-	6 ～ 8	-	-	4 ～ 8	-	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	13	15 ～ 800	f8	Degreasing	Not induction hardened	8	-	-	-	4 ～ 8	-	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	13	15 ～ 800	f8	Degreasing	Not induction hardened	-	-	-	4 ～ 8	-	6 ～ 8	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	13	15 ～ 800	f8	Degreasing	Not induction hardened	-	6 ～ 8	-	-	-	6 ～ 8	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	13	15 ～ 800	f8	Degreasing	Not induction hardened	8	-	-	-	-	6 ～ 8	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	13	15 ～ 800	f8	Degreasing	Not induction hardened	-	-	8	4 ～ 8	-	-	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	13	15 ～ 800	f8	Degreasing	Not induction hardened	-	6 ～ 8	8	-	-	-	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	13	15 ～ 800	f8	Degreasing	Not induction hardened	8	-	8	-	-	-	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	15	15 ～ 800	f8	Degreasing	Not induction hardened	-	-	-	4 ～ 10	4 ～ 10	-	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	15	15 ～ 800	f8	Degreasing	Not induction hardened	-	6 ～ 10	-	-	4 ～ 10	-	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	15	15 ～ 800	f8	Degreasing	Not induction hardened	8 ～ 10	-	-	-	4 ～ 10	-	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	15	15 ～ 800	f8	Degreasing	Not induction hardened	-	-	-	4 ～ 10	-	6 ～ 10	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	15	15 ～ 800	f8	Degreasing	Not induction hardened	-	6 ～ 10	-	-	-	6 ～ 10	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	15	15 ～ 800	f8	Degreasing	Not induction hardened	8 ～ 10	-	-	-	-	6 ～ 10	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	15	15 ～ 800	f8	Degreasing	Not induction hardened	-	-	8 ～ 10	4 ～ 10	-	-	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	15	15 ～ 800	f8	Degreasing	Not induction hardened	-	6 ～ 10	8 ～ 10	-	-	-	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	15	15 ～ 800	f8	Degreasing	Not induction hardened	8 ～ 10	-	8 ～ 10	-	-	-	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	16	16 ～ 800	f8	Degreasing	Not induction hardened	-	-	-	4 ～ 10	4 ～ 10	-	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	16	16 ～ 800	f8	Degreasing	Not induction hardened	-	6 ～ 10	-	-	4 ～ 10	-	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	16	16 ～ 800	f8	Degreasing	Not induction hardened	8 ～ 10	-	-	-	4 ～ 10	-	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	16	16 ～ 800	f8	Degreasing	Not induction hardened	-	-	-	4 ～ 10	-	6 ～ 10	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	16	16 ～ 800	f8	Degreasing	Not induction hardened	-	6 ～ 10	-	-	-	6 ～ 10	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	16	16 ～ 800	f8	Degreasing	Not induction hardened	8 ～ 10	-	-	-	-	6 ～ 10	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	16	16 ～ 800	f8	Degreasing	Not induction hardened	-	-	8 ～ 10	4 ～ 10	-	-	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	16	16 ～ 800	f8	Degreasing	Not induction hardened	-	6 ～ 10	8 ～ 10	-	-	-	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	16	16 ～ 800	f8	Degreasing	Not induction hardened	8 ～ 10	-	8 ～ 10	-	-	-	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	18	30 ～ 800	f8	Degreasing	Not induction hardened	-	-	-	4 ～ 12	4 ～ 12	-	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	18	30 ～ 800	f8	Degreasing	Not induction hardened	-	6 ～ 12	-	-	4 ～ 12	-	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	18	30 ～ 800	f8	Degreasing	Not induction hardened	8 ～ 12	-	-	-	4 ～ 12	-	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	18	30 ～ 800	f8	Degreasing	Not induction hardened	-	-	-	4 ～ 12	-	6 ～ 12	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	18	30 ～ 800	f8	Degreasing	Not induction hardened	-	6 ～ 12	-	-	-	6 ～ 12	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	18	30 ～ 800	f8	Degreasing	Not induction hardened	8 ～ 12	-	-	-	-	6 ～ 12	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	18	30 ～ 800	f8	Degreasing	Not induction hardened	-	-	8 ～ 12	4 ～ 12	-	-	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	18	30 ～ 800	f8	Degreasing	Not induction hardened	-	6 ～ 12	8 ～ 12	-	-	-	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	18	30 ～ 800	f8	Degreasing	Not induction hardened	8 ～ 12	-	8 ～ 12	-	-	-	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	20	30 ～ 800	f8	Degreasing	Not induction hardened	-	-	-	4 ～ 12	4 ～ 12	-	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	20	30 ～ 800	f8	Degreasing	Not induction hardened	-	6 ～ 12	-	-	4 ～ 12	-	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	20	30 ～ 800	f8	Degreasing	Not induction hardened	8 ～ 14	-	-	-	4 ～ 12	-	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	20	30 ～ 800	f8	Degreasing	Not induction hardened	-	-	-	4 ～ 12	-	6 ～ 12	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	20	30 ～ 800	f8	Degreasing	Not induction hardened	-	6 ～ 12	-	-	-	6 ～ 12	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	20	30 ～ 800	f8	Degreasing	Not induction hardened	8 ～ 14	-	-	-	-	6 ～ 12	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	20	30 ～ 800	f8	Degreasing	Not induction hardened	-	-	8 ～ 14	4 ～ 12	-	-	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	20	30 ～ 800	f8	Degreasing	Not induction hardened	-	6 ～ 12	8 ～ 14	-	-	-	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	20	30 ～ 800	f8	Degreasing	Not induction hardened	8 ～ 14	-	8 ～ 14	-	-	-	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	25	35 ～ 800	f8	Degreasing	Not induction hardened	-	-	-	4 ～ 16	4 ～ 16	-	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	25	35 ～ 800	f8	Degreasing	Not induction hardened	-	6 ～ 16	-	-	4 ～ 16	-	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	25	35 ～ 800	f8	Degreasing	Not induction hardened	8 ～ 18	-	-	-	4 ～ 16	-	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	25	35 ～ 800	f8	Degreasing	Not induction hardened	-	-	-	4 ～ 16	-	6 ～ 16	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	25	35 ～ 800	f8	Degreasing	Not induction hardened	-	6 ～ 16	-	-	-	6 ～ 16	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	25	35 ～ 800	f8	Degreasing	Not induction hardened	8 ～ 18	-	-	-	-	6 ～ 16	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	25	35 ～ 800	f8	Degreasing	Not induction hardened	-	-	8 ～ 18	4 ～ 16	-	-	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	25	35 ～ 800	f8	Degreasing	Not induction hardened	-	6 ～ 16	8 ～ 18	-	-	-	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	25	35 ～ 800	f8	Degreasing	Not induction hardened	8 ～ 18	-	8 ～ 18	-	-	-	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	30	35 ～ 800	f8	Degreasing	Not induction hardened	-	-	-	6 ～ 20	6 ～ 20	-	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	30	35 ～ 800	f8	Degreasing	Not induction hardened	-	6 ～ 20	-	-	6 ～ 20	-	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	30	35 ～ 800	f8	Degreasing	Not induction hardened	8 ～ 18	-	-	-	6 ～ 20	-	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	30	35 ～ 800	f8	Degreasing	Not induction hardened	-	-	-	6 ～ 20	-	6 ～ 20	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	30	35 ～ 800	f8	Degreasing	Not induction hardened	-	6 ～ 20	-	-	-	6 ～ 20	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	30	35 ～ 800	f8	Degreasing	Not induction hardened	8 ～ 18	-	-	-	-	6 ～ 20	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	30	35 ～ 800	f8	Degreasing	Not induction hardened	-	-	8 ～ 18	6 ～ 20	-	-	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	30	35 ～ 800	f8	Degreasing	Not induction hardened	-	6 ～ 20	8 ～ 18	-	-	-	SUS304	-
-	1 Piece(s)	11 Day(s) or more	[Steel] S45C	Not Provided	30	35 ～ 800	f8	Degreasing	Not induction hardened	8 ～ 18	-	8 ～ 18	-	-	-	SUS304	-
-	1 Piece(s)	12 Day(s) or more	[Steel] S45C	Not Provided	35	35 ～ 800	f8	Degreasing	Not induction hardened	-	-	-	8 ～ 24	8 ～ 24	-	SUS304	-
-	1 Piece(s)	12 Day(s) or more	[Steel] S45C	Not Provided	35	35 ～ 800	f8	Degreasing	Not induction hardened	8 ～ 18	-	-	-	8 ～ 24	-	SUS304	-
-	1 Piece(s)	12 Day(s) or more	[Steel] S45C	Not Provided	35	35 ～ 800	f8	Degreasing	Not induction hardened	-	-	8 ～ 18	8 ～ 24	-	-	SUS304	-
-	1 Piece(s)	12 Day(s) or more	[Steel] S45C	Not Provided	35	35 ～ 800	f8	Degreasing	Not induction hardened	8 ～ 18	-	8 ～ 18	-	-	-	SUS304	-
-	1 Piece(s)	12 Day(s) or more	[Steel] S45C	Not Provided	40	50 ～ 800	f8	Degreasing	Not induction hardened	-	-	-	10 ～ 30	10 ～ 30	-	SUS304	-
-	1 Piece(s)	12 Day(s) or more	[Steel] S45C	Not Provided	40	50 ～ 800	f8	Degreasing	Not induction hardened	10 ～ 18	-	-	-	10 ～ 30	-	SUS304	-
-	1 Piece(s)	12 Day(s) or more	[Steel] S45C	Not Provided	40	50 ～ 800	f8	Degreasing	Not induction hardened	-	-	10 ～ 18	10 ～ 30	-	-	SUS304	-
-	1 Piece(s)	12 Day(s) or more	[Steel] S45C	Not Provided	40	50 ～ 800	f8	Degreasing	Not induction hardened	10 ～ 18	-	10 ～ 18	-	-	-	SUS304	-
-	1 Piece(s)	12 Day(s) or more	[Steel] S45C	Not Provided	50	65 ～ 800	f8	Degreasing	Not induction hardened	-	-	-	12 ～ 30	12 ～ 30	-	SUS304	-
-	1 Piece(s)	12 Day(s) or more	[Steel] S45C	Not Provided	50	65 ～ 800	f8	Degreasing	Not induction hardened	12 ～ 18	-	-	-	12 ～ 30	-	SUS304	-

Basic Information

Basic Shape	Solid	End Shape (Left)	Tapped	End Shape (Right)	Tapped
Shaft End Perpendicularity	Perpendicularity (0.2)	Surface Treatment	Hard Chrome Plating	Material Certificate	Available

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Search by Category / Brand

Search by Category

How can we improve?