(!)NOTE : Windows 7 users won’t be able to use some latest features of eCatalog/WOS since Microsoft is ending support for Windows 7 on 14 Jan, 2020. Please upgrade your system for uninterrupted services.
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
Product Detail
Shaft Dia. D
End Shape (Left)
Basic Shape_02
Length L
Cleaning Method
Left End Shape
Right End Shape
F
Tapped (Coarse / Effective Length: Nominal Diameter × 2) [M]
R
B
H
P
M
Change to Fine Thread [PMC]
T
S
U
Q
N
Change to Fine Thread [QNC]
R
W
type
End Shape (Right)
CAD
Days to Ship
Specification/Dimensions
-
Shaft Dia. D(mm)
-
End Shape (Left)
-
Unfinished -
Tapped -
Threaded -
Retaining Ring Grooves on Both Ends -
Hex Socket -
Tapped
-
-
Basic Shape_02
-
Straight -
One End Stepped -
Both Ends Stepped
-
-
Length L(mm)
-
Cleaning Method
- Degreasing
- Precision Cleaning
- Electrolytic Polishing + Precision Cleaning
-
Left End Shape
- A
- B
- C
- D
- E
- F
- G
- H
- J
-
Right End Shape
- A
- B
- C
- D
- E
- F
- G
- H
- J
-
F(mm)
-
Tapped (Coarse / Effective Length: Nominal Diameter × 2) [M](㎜)
-
R(㎜)
-
B(mm)
-
H(mm)
-
P(mm)
-
M(mm)
-
Change to Fine Thread [PMC]
-
T(mm)
-
S(mm)
-
U(mm)
-
Q(mm)
-
N(mm)
-
Change to Fine Thread [QNC](mm)
-
R(mm)
-
W(mm)
-
type
- SH-SSFRAA
- SH-SSFRAB
- SH-SSFRAC
- SH-SSFRAD
- SH-SSFRAE
- SH-SSFRAF
- SH-SSFRAG
- SH-SSFRAH
- SH-SSFRAJ
- SH-SSFRBA
- SH-SSFRBB
- SH-SSFRBC
- SH-SSFRBD
- SH-SSFRBE
- SH-SSFRBF
- SH-SSFRBG
- SH-SSFRBH
- SH-SSFRBJ
- SH-SSFRCA
- SH-SSFRCB
- SH-SSFRCC
- SH-SSFRCD
- SH-SSFRCE
- SH-SSFRCF
- SH-SSFRCG
- SH-SSFRCH
- SH-SSFRCJ
- SH-SSFRDA
- SH-SSFRDB
- SH-SSFRDC
- SH-SSFRDD
- SH-SSFRDE
- SH-SSFRDF
- SH-SSFRDG
- SH-SSFRDH
- SH-SSFRDJ
- SH-SSFREA
- SH-SSFREB
- SH-SSFREC
- SH-SSFRED
- SH-SSFREE
- SH-SSFREF
- SH-SSFREG
- SH-SSFREH
- SH-SSFREJ
- SH-SSFRFA
- SH-SSFRFB
- SH-SSFRFC
- SH-SSFRFD
- SH-SSFRFE
- SH-SSFRFF
- SH-SSFRFG
- SH-SSFRFH
- SH-SSFRFJ
- SH-SSFRGA
- SH-SSFRGB
- SH-SSFRGC
- SH-SSFRGD
- SH-SSFRGE
- SH-SSFRGF
- SH-SSFRGG
- SH-SSFRGH
- SH-SSFRGJ
- SH-SSFRHB
- SH-SSFRHC
- SH-SSFRHE
- SH-SSFRHJ
- SH-SSFRJA
- SH-SSFRJB
- SH-SSFRJC
- SH-SSFRJD
- SH-SSFRJE
- SH-SSFRJF
- SH-SSFRJG
- SH-SSFRJH
- SH-SSFRJJ
- SHD-SSFRAA
- SHD-SSFRAB
- SHD-SSFRAC
- SHD-SSFRAD
- SHD-SSFRAE
- SHD-SSFRAF
- SHD-SSFRAG
- SHD-SSFRAH
- SHD-SSFRAJ
- SHD-SSFRBA
- SHD-SSFRBB
- SHD-SSFRBC
- SHD-SSFRBD
- SHD-SSFRBE
- SHD-SSFRBF
- SHD-SSFRBG
- SHD-SSFRBH
- SHD-SSFRBJ
- SHD-SSFRCA
- SHD-SSFRCB
- SHD-SSFRCC
- SHD-SSFRCD
- SHD-SSFRCE
- SHD-SSFRCF
- SHD-SSFRCG
- SHD-SSFRCH
- SHD-SSFRCJ
- SHD-SSFRDA
- SHD-SSFRDB
- SHD-SSFRDC
- SHD-SSFRDD
- SHD-SSFRDE
- SHD-SSFRDF
- SHD-SSFRDG
- SHD-SSFRDH
- SHD-SSFRDJ
- SHD-SSFREA
- SHD-SSFREB
- SHD-SSFREC
- SHD-SSFRED
- SHD-SSFREE
- SHD-SSFREF
- SHD-SSFREG
- SHD-SSFREH
- SHD-SSFREJ
- SHD-SSFRFA
- SHD-SSFRFB
- SHD-SSFRFC
- SHD-SSFRFD
- SHD-SSFRFE
- SHD-SSFRFF
- SHD-SSFRFG
- SHD-SSFRFH
- SHD-SSFRFJ
- SHD-SSFRGA
- SHD-SSFRGB
- SHD-SSFRGC
- SHD-SSFRGD
- SHD-SSFRGE
- SHD-SSFRGF
- SHD-SSFRGG
- SHD-SSFRGH
- SHD-SSFRGJ
- SHD-SSFRHB
- SHD-SSFRHC
- SHD-SSFRHE
- SHD-SSFRHJ
- SHD-SSFRJA
- SHD-SSFRJB
- SHD-SSFRJC
- SHD-SSFRJD
- SHD-SSFRJE
- SHD-SSFRJF
- SHD-SSFRJG
- SHD-SSFRJH
- SHD-SSFRJJ
- SL-SSFRAA
- SL-SSFRAB
- SL-SSFRAC
- SL-SSFRAD
- SL-SSFRAE
- SL-SSFRAF
- SL-SSFRAG
- SL-SSFRAH
- SL-SSFRAJ
- SL-SSFRBA
- SL-SSFRBB
- SL-SSFRBC
- SL-SSFRBD
- SL-SSFRBE
- SL-SSFRBF
- SL-SSFRBG
- SL-SSFRBH
- SL-SSFRBJ
- SL-SSFRCA
- SL-SSFRCB
- SL-SSFRCC
- SL-SSFRCD
- SL-SSFRCE
- SL-SSFRCF
- SL-SSFRCG
- SL-SSFRCH
- SL-SSFRCJ
- SL-SSFRDA
- SL-SSFRDB
- SL-SSFRDC
- SL-SSFRDD
- SL-SSFRDE
- SL-SSFRDF
- SL-SSFRDG
- SL-SSFRDH
- SL-SSFRDJ
- SL-SSFREA
- SL-SSFREB
- SL-SSFREC
- SL-SSFRED
- SL-SSFREE
- SL-SSFREF
- SL-SSFREG
- SL-SSFREH
- SL-SSFREJ
- SL-SSFRFA
- SL-SSFRFB
- SL-SSFRFC
- SL-SSFRFD
- SL-SSFRFE
- SL-SSFRFF
- SL-SSFRFG
- SL-SSFRFH
- SL-SSFRFJ
- SL-SSFRGA
- SL-SSFRGB
- SL-SSFRGC
- SL-SSFRGD
- SL-SSFRGE
- SL-SSFRGF
- SL-SSFRGG
- SL-SSFRGH
- SL-SSFRGJ
- SL-SSFRHB
- SL-SSFRHC
- SL-SSFRHE
- SL-SSFRHJ
- SL-SSFRJA
- SL-SSFRJB
- SL-SSFRJC
- SL-SSFRJD
- SL-SSFRJE
- SL-SSFRJF
- SL-SSFRJG
- SL-SSFRJH
- SL-SSFRJJ
-
End Shape (Right)
-
Straight -
Tapped -
Threaded -
Retaining Ring Grooves on Both Ends -
Hex Socket -
Tapped
-
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 14 Day(s) or Less
- 19 Day(s) or Less
Specify Alterations
[Clean & Pack] Rotary Shaft - End Shape Selectable
![[Clean & Pack] Rotary Shaft - End Shape Selectable](http://content.misumi-ec.com/image/upload/f_auto,q_auto,t_product_main/v1/p/jp/product/series/110310638639/110310638639_001_20230911105917.jpg?$product_main$)
Click this image to zoom it.
Move the mouse over or click the image to zoom
You can add up to 6 items per a category to the compare list.
Part Number :
Copy Part Number URL to Clipboard
The part number URL has been copied into your clipboard.
-
- Order Qty :
-
-
- Price :
- ---
-
- Total Price :
- ---
-
- Days to ship :
- ---
Select part number to Order Now/ Add to Cart
(i)
Caution
- See here for related information such as technical information on cleaning effects and other cleaned product lineups.
- Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product. Please be careful about the application location and storage environment.
Similar Products
Product DetailProduct Description
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.
■Part Number for Clean & Pack Products
| ·Degreasing (Anti-rust single packing) | : Part Number SL-□□ |
| ·Precision cleaning (Degassing double packing) | : Part Number SH-□□ |
| ·Electrolytic polishing + precision cleaning (Degassing double packing) | : Part Number SHD-□□ |
| Product Part Number | Cleaning Method | Packaging Type | Effects Compared to Uncleaned Product | Environment (Standard) | Process |
| SL-□□ | Degreasing | Anti-rust packing | Oil removal | General environment | Regular assembly process |
| Post battery assembly process | |||||
| SH-□□ | Precision cleaning | Degassing double packing | Oil removal Dust removal | Clean environment (Class 10 to 1,000) | Battery assembly process |
| LCD-related post assembly process | |||||
| In-vehicle camera assembly process | |||||
| SHD-□□ | Electrolytic polishing + precision cleaning | Degassing double packing | Oil removal Dust removal Outgas reduction | Vacuum environment Clean environment (Class 10 to 1,000) | Pre-semiconductor process |
| Liquid crystal deposition process | |||||
| Pre-OLED process |
■Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.
Material shape (Both shaft ends A shape)
[ ! ] (Y) ≤ D × 50 is required for (Y) dimension.
[ ! ] When only one end needs to be machined, select A Shape for the other end
.
[ ! ] When L dimension is less than the tap pilot hole depth, the pilot hole might go through.
[ ! ] H and J will not be symmetrical when applied to both ends of the shaft.
[ ! ] H and J may be out of phase with other alterations.
[!] Retaining ring is not included for F and G machining. Please note this.
[ ! ] (Y) ≤ D × 50 is required for (Y) dimension.
[ ! ] When only one end needs to be machined, select A Shape for the other end
.
[ ! ] When L dimension is less than the tap pilot hole depth, the pilot hole might go through.
[ ! ] H and J will not be symmetrical when applied to both ends of the shaft.
[ ! ] H and J may be out of phase with other alterations.
[!] Retaining ring is not included for F and G machining. Please note this.
| Left End Shape | Right End Shape | Machining Conditions | ||||||
A | A | — | ||||||
B | B | For M3 to 8 M ≤ D−2 For M10 to 16 M ≤ D−3 For M20, 24 M ≤ D−4 For M30 M ≤ D−5 | ||||||
C | C | P (Q) = M (N) Specify M (N) Dimension. Specification of P(Q) dimension is not required. | ||||||
D | D | — | ||||||
E | E | For M3 to 8, M(N) ≤ P(Q) - 2 For M10 to 16, M(N) ≤ P(Q) - 3 For M20 or 24, M(N) ≤ P(Q) - 4 For M30, M(N) ≤ P(Q) - 5 | ||||||
F | F | D dimension, 27, 31, 33, 34 36·37·38·39·41 42·43·44·46·47 48 and 49 cannot be specified | ||||||
G | G | P, Q dimensions, 27, 31, 33, 34 36·37·38·39·41 42·43·44·46·47 48 and 49 cannot be specified | ||||||
H | H | Applicable when D ≤ 30 | ||||||
J | J | R(W) - M(N) ≥ t D－R－M ≥ 2 D－W－N ≥ 2
M × 2 N × 2 |
| Type | [M] Material | Cleaning Method | |||
| Cleaning Method | Cleaning Environment | Packaging Type | Packing Environment | ||
| SL-SSFR□□ | SUS304 | Degreasing | General environment | Anti-rust packing | General environment |
| SH-SSFR□□ | Precision cleaning | Class 1,000 | Degassing double packing | Class 10 | |
| SHD-SSFR□□ | Electrolytic polishing + precision cleaning | ||||
[!] See the details of degreasing, precision cleaning, and electrolytic polishing shown at the bottom of the
specification table.Specification Table
| Part Number | — | D | — | L | — | F | — | B | — | H | — | P | — | M | — | T | — | S | — | U | — | Q | — | N | — | R | — | W |
| SL-SSFRCE | — | D15 | — | L350 | — | F20 | — | B16 | — | M8 | — | T20 | — | Q14 | — | N6 |
| Part Number | 1 mm Increments | 0.1 mm Increments | 1 mm Increments | Selection | 1 mm Increments | C | |||||||
| Type | Left End Shape | Right End Shape | D | L | F·T | B·S | H·U | P·Q | M·N | R·W | |||
| SL-SSFR SH-SSFR SHD-SSFR | A B C D E F G H J | A B C D E F G H J | 6 to 50 | 20.0 to 800.0 (L ≤ D × 50) | 2 ≤ F ≤ P × 5 2 ≤ T ≤ Q × 5 | When M, N ≤ 10 | D/3 ≤ P·Q < D | 3 6 12 24 | 4 8 16 30 | 5 10 20 | D ≥ M+4+R D ≥ N+4+W R ≥ M+3 W ≥ N+3 | 0.5 | |
| 2 ≤ B ≤ M × 3 | When D, P, Q ≤ 6 | ||||||||||||
| 2 ≤ S ≤ N × 3 | 2 ≤ H·U | ||||||||||||
| & | |||||||||||||
| B ≤ F－3 | When 6 < D, P, Q ≤ 10 | ||||||||||||
| S ≤ T－3 | 3 ≤ H·U | ||||||||||||
| When M, N ≥ 12 | |||||||||||||
| 2 ≤ B ≤ M × 3 | When 10 < D, P, Q ≤ 20 | ||||||||||||
| 2 ≤ S ≤ N × 3 | 4 ≤ H·U | ||||||||||||
| & | |||||||||||||
| B ≤ F－5 | When 20 < D, P, Q | ||||||||||||
| S ≤ T－5 | 5 ≤ H·U | ||||||||||||
| [ ! ]B ≥ Pitch × 3 | |||||||||||||
| S ≥ Pitch × 3 | |||||||||||||
| Coarse Thread Dimensions | |
| M | Pitch |
| 3 | 0.5 |
| 4 | 0.7 |
| 5 | 0.8 |
| 6 | 1.0 |
| 8 | 1.25 |
| 10 | 1.5 |
| 12 | 1.75 |
| 16 | 2.0 |
| 20 | 2.5 |
| 24 | 3.0 |
| 30 | 3.5 |
Alterations
| Part Number | — | D | — | L | — | F | — | B | — | H | — | P | — | M (PMC) | — | T | — | S | — | U | — | Q | — | N (QNC) | — | R | — | W | — | (KC, WKC, RC..etc.) |
| SL-SSFRJA | — | D20 | — | L350 | — | M4 | — | R10 | — | LKC |
| Alterations Code | Alteration Details | Applicable Conditions | Ordering Example | ||||||||
| KC | Keyway at one location | KC, A = 0.1 mm Increments [ ! ] When the keyway position is less than 1 mm away from the end face, | SL−SSFRDD30−300−F25−P20−T25−Q10−KC20−A10 | ||||||||
| WKC | Keyways at two locations | WKC, C, K, E = 0.1 mm Increments [ ! ] When the keyway position is less than 1 mm away from the end face, | SL−SSFRDD30−300−F25−P20−T25−Q10−WKC5−C20−K5−E10 | ||||||||
| PKC·QKC | Keyway on Step P (0 Point on the End Face) | PKC, QKC = 0.1 mm Increments [ ! ] Keyway length ≤ 70 [NG] Not applicable when P ≤ 5 | SL−SSFRDD30−300−F25−P20−T25−Q10−PKC20.0 | ||||||||
| FC | Set screw flat at one location | FC, G = 1 mm Increments [ ! ]G ≤ 70
| SL−SSFRDD30−300−F25−P20−T25−Q10−FC10−G5 | ||||||||
| WFC | Set screw flats at two locations | WFC, J, W, V = 1 mm Increments [ ! ]J·V ≤ 70
| SL−SSFRDD30−300−F25−P20−T25−Q10−WFC10−J15−W10−V20 | ||||||||
| SFC | Set Screw Flat, 2 Set Screw Flats (Angle Specified) | SFC, SG = 1 mm Increments AG = 15° Increments [ ! ]SG ≤ 70 | SL−SSFRDD30−300−F25−P20−T25−Q10−SFC10−SG3−AG120 | ||||||||
| UC | Slit Cam Groove | UC = 1 mm Increments [ ! ] For D dimensions 6, 8, 10 and 12 only | SL−SSFRDD10−300−F25−P8−T25−Q8−UC10 | ||||||||
| LKC | L Dimension Tolerance Change | L < 500···L±0.05 L ≥ 500···L±0.1 [NG] L800 or more is not applicable | SL−SSFRDD30−300−F25−P20−T25−Q10−LKC | ||||||||
| CKC | Concentricity | Change the concentricity to 0.02. [NG] Not applicable when D Tol. = h9 [ ! ] For Lmax, see the table on the right
| SL−SSFRDD30−300−F25−P20−T25−Q10−CKC | ||||||||
| SC | Wrench Flats | SC = 1 mm Increments [ ! ]SC+ℓ2 ≤ L [ ! ] SC = 0 or SC ≥ 1 | SL−SSFRDD30−300−F25−P20−T25−Q10−SC10 | ||||||||
| PMC·QNC | Change to fine thread | Change coarse thread to fine thread. Specify PMC instead of P and QNC instead of Q | SL−SSFRCC30−300−F25−B20−M20−T25−S20−QNC10 | ||||||||
| PC·QC | Added Undercut Dimensions | Add undercut to Dimension P and Dimension Q. [NG] Not applicable when D = P or D = Q | SL−SSFRCC30−300−F25−B20−M20−T25−S20−N20−PC |
[!] When combined with other alterations, ± 2 degree phase differential may occur. Provide 2 mm or more clearance between this alteration and others.
[ ! ] When multiple keyways or set screw flats are specified, they are added in the same plane. When the distance of the alterations are over 500 mm, ± 2 degree phase difference may occur.
[ ! ] When multiple keyways or set screw flats are specified, they are added in the same plane. When the distance of the alterations are over 500 mm, ± 2 degree phase difference may occur.
Detailed Retaining Ring Groove Dimensions for Rotary Shafts
|
|  | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Cleaning Process·Degreasing (Part Number: SL-□□)
Working Environment: General environment | ||||||
|---|---|---|---|---|---|---|
 Alkaline warm pure water |  |  Ultrasonic pure water cleaning after cleaning with pure water *3 times | |  Dry | |  Anti-rust single packing |
·Precision cleaning (Part Number: SH-□□)
Working Environment: Class 1,000 | Working Environment: Class 10 | |||||||
|---|---|---|---|---|---|---|---|---|
Hydrocarbon cleaning Ro water cleaning | |  After high-pressure water jet cleaning (Ro water) Wash with pure water (10 MΩ·cm) | |  Use pure water (13 MΩ·cm) | | Use nitrogen blow | |  Conducted on a clean bench in a Class 10 clean environment |
·Electrolytic polishing + precision cleaning (Part Number: SHD-□□)
Working Environment: Class 1,000 | Working Environment: Class 10 | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Hydrocarbon cleaning Ro water cleaning | |  Electrolytic polishing with an electrolytic polishing layer according to the material | | After high-pressure water jet cleaning (Ro water) Wash with pure water (10 MΩ·cm) | | Use warm pure water (13 MΩ·cm) | | Use nitrogen blow | | Conducted on a clean bench in a Class 10 clean environment |
Packaging Example| For degreasing: (Part Number: SL-□□)  | For precision cleaning or electrolytic polishing + precision cleaning: (Part Number: SH-□□/SHD-□□)  [ ! ] Both the first and second layer packaging are degassed. |
Cleaning Effectiveness / Recommended Environment for UseCleaning Method | Product Part Number | Packaging Type | Effects Compared to Uncleaned Product | Environment (Standard) | Use Case and Process |
|---|---|---|---|---|---|
| Degreasing | SL-□□ | Anti-rust packing | Oil removal | General environment | Regular assembly process |
| Post battery assembly process | |||||
| Precision cleaning | SH-□□ | Degassing double packing | Oil removal Dust removal | Clean environment (Class 10 to 1,000) | Battery assembly process |
| LCD-related post assembly process | |||||
| In-vehicle camera assembly process | |||||
| Electrolytic polishing + precision cleaning | SHD-□□ | Degassing double packing | Oil removal Dust removal Outgas reduction | Vacuum environment Clean environment (Class 10 to 1,000) | Pre-semiconductor process |
| Liquid crystal deposition process | |||||
| Pre-OLED process |
Part Number
- Incomplete part number.
Please use left hand selections to complete a part number.
Loading...
| Part Number |
|---|
| SH-SSFRAA-D[6-30/1]-L[20-800/0.1] |
| SH-SSFRAA-D[32,33,34,35,36,38,40,45,50]-L[20-800/0.1] |
| SH-SSFRAD-D[6-30/1]-L[20-800/0.1]-T[2-200/0.1]-Q[3-49/1] |
| SH-SSFRAD-D[32,33,34,35,36,38,40,45,50]-L[20-800/0.1]-T[2-200/0.1]-Q[3-49/1] |
| SH-SSFRBA-D[6-30/1]-L[20-800/0.1]-M[3,4,5,6,8,10,12,16,20,24,30] |
| SH-SSFRBA-D[32,33,34,35,36,38,40,45,50]-L[20-800/0.1]-M[3,4,5,6,8,10,12,16,20,24,30] |
| SH-SSFRBD-D[6-30/1]-L[20-800/0.1]-M[3,4,5,6,8,10,12,16,20,24,30]-T[2-200/0.1]-Q[2-49/1] |
| SH-SSFRBD-D[32,33,34,35,36,38,40,45,50]-L[20-800/0.1]-M[3,4,5,6,8,10,12,16,20,24,30]-T[2-200/0.1]-Q[2-49/1] |
| SH-SSFRCA-D[6-30/1]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-M[3,4,5,6,8,10,12,16,20,24,30] |
| SH-SSFRCA-D[6-30/1]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-PMC[3,4,5,6,8,10,12,15,17,20,25,30,35,40] |
| SH-SSFRCA-D[32,33,34,35,36,38,40,45,50]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-M[3,4,5,6,8,10,12,16,20,24,30] |
| SH-SSFRCA-D[32,33,34,35,36,38,40,45,50]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-PMC[3,4,5,6,8,10,12,15,17,20,25,30,35,40] |
| SH-SSFRCD-D[6-30/1]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-M[3,4,5,6,8,10,12,16,20,24,30]-T[2-200/0.1]-Q[2-49/1] |
| SH-SSFRCD-D[6-30/1]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-PMC[3,4,5,6,8,10,12,15,17,20,25,30,35,40]-T[2-200/0.1]-Q[2-49/1] |
| SH-SSFRCD-D[32,33,34,35,36,38,40,45,50]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-M[3,4,5,6,8,10,12,16,20,24,30]-T[2-200/0.1]-Q[2-49/1] |
| SH-SSFRCD-D[32,33,34,35,36,38,40,45,50]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-PMC[3,4,5,6,8,10,12,15,17,20,25,30,35,40]-T[2-200/0.1]-Q[2-49/1] |
| SH-SSFRDA-D[6-30/1]-L[20-800/0.1]-F[2-150/0.1]-P[3-49/1] |
| SH-SSFRDA-D[32,33,34,35,36,38,40,45,50]-L[20-800/0.1]-F[2-150/0.1]-P[3-49/1] |
| SH-SSFRDD-D[6-30/1]-L[20-800/0.1]-F[2-150/0.1]-P[3-49/1]-T[2-200/0.1]-Q[3-49/1] |
| SH-SSFRDD-D[32,33,34,35,36,38,40,45,50]-L[20-800/0.1]-F[2-150/0.1]-P[3-49/1]-T[2-200/0.1]-Q[3-49/1] |
| SH-SSFREA-D[6-30/1]-L[20-800/0.1]-F[2-150/0.1]-P[3-49/1]-M[3,4,5,6,8,10,12,16,20,24,30] |
| SH-SSFREA-D[32,33,34,35,36,38,40,45,50]-L[20-800/0.1]-F[2-150/0.1]-P[3-49/1]-M[3,4,5,6,8,10,12,16,20,24,30] |
| SH-SSFRED-D[6-30/1]-L[20-800/0.1]-F[2-245/0.1]-P[3-49/1]-M[3,4,5,6,8,10,12,16,20,24,30]-T[2-200/0.1]-Q[3-49/1] |
| SH-SSFRED-D[32,33,34,35,36,38,40,45,50]-L[20-800/0.1]-F[2-245/0.1]-P[3-49/1]-M[3,4,5,6,8,10,12,16,20,24,30]-T[2-200/0.1]-Q[3-49/1] |
| SH-SSFRFA-D[6-30/1]-L[20-800/0.1]-H[2-800/1] |
| SH-SSFRFA-D[32,33,34,35,36,38,40,45,50]-L[20-800/0.1]-H[2-800/1] |
| SH-SSFRFD-D[6-30/1]-L[20-800/0.1]-H[2-800/1]-T[2-200/0.1]-Q[3-49/1] |
| SH-SSFRFD-D[32,33,34,35,36,38,40,45,50]-L[20-800/0.1]-H[2-800/1]-T[2-200/0.1]-Q[3-49/1] |
| SH-SSFRGA-D[6-30/1]-L[20-800/0.1]-F[2-150/0.1]-H[2-198/1]-P[3-26/1] |
| SH-SSFRGA-D[6-30/1]-L[20-800/0.1]-F[2-150/0.1]-H[2-198/1]-P[28,29,30,32,35,40,45,50] |
| SH-SSFRGA-D[32,33,34,35,36,38,40,45,50]-L[20-800/0.1]-F[2-150/0.1]-H[2-198/1]-P[3-26/1] |
| SH-SSFRGA-D[32,33,34,35,36,38,40,45,50]-L[20-800/0.1]-F[2-150/0.1]-H[2-198/1]-P[28,29,30,32,35,40,45,50] |
| SH-SSFRGD-D[6-30/1]-L[20-800/0.1]-F[2-150/0.1]-H[2-198/1]-P[3-26/1]-T[2-200/0.1]-Q[3-49/1] |
| SH-SSFRGD-D[6-30/1]-L[20-800/0.1]-F[2-150/0.1]-H[2-198/1]-P[28,29,30,32,35,40,45,50]-T[2-200/0.1]-Q[3-49/1] |
| SH-SSFRGD-D[32,33,34,35,36,38,40,45,50]-L[20-800/0.1]-F[2-150/0.1]-H[2-198/1]-P[3-26/1]-T[2-200/0.1]-Q[3-49/1] |
| SH-SSFRGD-D[32,33,34,35,36,38,40,45,50]-L[20-800/0.1]-F[2-150/0.1]-H[2-198/1]-P[28,29,30,32,35,40,45,50]-T[2-200/0.1]-Q[3-49/1] |
| SH-SSFRJA-D[15-30/1]-L[20-800/0.1]-M[3,4,5,6,8,10,12,16,20,24,30]-R[7-42/1] |
| SH-SSFRJA-D[32,33,34,35,36,38,40,45,50]-L[20-800/0.1]-M[3,4,5,6,8,10,12,16,20,24,30]-R[7-42/1] |
| SH-SSFRJD-D[15-30/1]-L[20-800/0.1]-M[3,4,5,6,8,10,12,16,20,24,30]-T[2-200/0.1]-Q[3-49/1]-R[7-42/1] |
| SH-SSFRJD-D[32,33,34,35,36,38,40,45,50]-L[20-800/0.1]-M[3,4,5,6,8,10,12,16,20,24,30]-T[2-200/0.1]-Q[3-49/1]-R[7-42/1] |
| SHD-SSFRAA-D[6-30/1]-L[20-800/0.1] |
| SHD-SSFRAA-D[32,33,34,35,36,38,40,45,50]-L[20-800/0.1] |
| SHD-SSFRAD-D[6-30/1]-L[20-800/0.1]-T[2-200/0.1]-Q[3-49/1] |
| SHD-SSFRAD-D[32,33,34,35,36,38,40,45,50]-L[20-800/0.1]-T[2-200/0.1]-Q[3-49/1] |
| SHD-SSFRBA-D[6-30/1]-L[20-800/0.1]-M[3,4,5,6,8,10,12,16,20,24,30] |
| SHD-SSFRBA-D[32,33,34,35,36,38,40,45,50]-L[20-800/0.1]-M[3,4,5,6,8,10,12,16,20,24,30] |
| SHD-SSFRBD-D[6-30/1]-L[20-800/0.1]-M[3,4,5,6,8,10,12,16,20,24,30]-T[2-200/0.1]-Q[2-49/1] |
| SHD-SSFRBD-D[32,33,34,35,36,38,40,45,50]-L[20-800/0.1]-M[3,4,5,6,8,10,12,16,20,24,30]-T[2-200/0.1]-Q[2-49/1] |
| SHD-SSFRCA-D[6-30/1]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-M[3,4,5,6,8,10,12,16,20,24,30] |
| SHD-SSFRCA-D[6-30/1]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-PMC[3,4,5,6,8,10,12,15,17,20,25,30,35,40] |
| SHD-SSFRCA-D[32,33,34,35,36,38,40,45,50]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-M[3,4,5,6,8,10,12,16,20,24,30] |
| SHD-SSFRCA-D[32,33,34,35,36,38,40,45,50]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-PMC[3,4,5,6,8,10,12,15,17,20,25,30,35,40] |
| SHD-SSFRCD-D[6-30/1]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-M[3,4,5,6,8,10,12,16,20,24,30]-T[2-200/0.1]-Q[2-49/1] |
| SHD-SSFRCD-D[6-30/1]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-PMC[3,4,5,6,8,10,12,15,17,20,25,30,35,40]-T[2-200/0.1]-Q[2-49/1] |
| SHD-SSFRCD-D[32,33,34,35,36,38,40,45,50]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-M[3,4,5,6,8,10,12,16,20,24,30]-T[2-200/0.1]-Q[2-49/1] |
| SHD-SSFRCD-D[32,33,34,35,36,38,40,45,50]-L[20-800/0.1]-F[2-150/0.1]-B[0-90/1]-PMC[3,4,5,6,8,10,12,15,17,20,25,30,35,40]-T[2-200/0.1]-Q[2-49/1] |
| SHD-SSFRDA-D[6-30/1]-L[20-800/0.1]-F[2-150/0.1]-P[3-49/1] |
| SHD-SSFRDA-D[32,33,34,35,36,38,40,45,50]-L[20-800/0.1]-F[2-150/0.1]-P[3-49/1] |
| SHD-SSFRDD-D[6-30/1]-L[20-800/0.1]-F[2-150/0.1]-P[3-49/1]-T[2-200/0.1]-Q[3-49/1] |
| SHD-SSFRDD-D[32,33,34,35,36,38,40,45,50]-L[20-800/0.1]-F[2-150/0.1]-P[3-49/1]-T[2-200/0.1]-Q[3-49/1] |
| Part Number | Price | Minimum Order Qty. | Volume Discount | Days to Ship | Shaft Dia. D (mm) | End Shape (Left) | Basic Shape_02 | End Shape (Right) | Length L (mm) | Cleaning Method | Left End Shape | Right End Shape | F (mm) | Tapped (Coarse / Effective Length: Nominal Diameter × 2) [M] (㎜) | R (㎜) | B (mm) | H (mm) | P (mm) | M (mm) | Change to Fine Thread [PMC] | T (mm) | S (mm) | U (mm) | Q (mm) | N (mm) | Change to Fine Thread [QNC] (mm) | R (mm) | W (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 14 Day(s) or more | 6 ～ 30 | Unfinished | Straight | Straight | 20 ～ 800 | Precision Cleaning | A | A | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 14 Day(s) or more | 32 ～ 50 | Unfinished | Straight | Straight | 20 ～ 800 | Precision Cleaning | A | A | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 14 Day(s) or more | 6 ～ 30 | Unfinished | One End Stepped | Straight | 20 ～ 800 | Precision Cleaning | A | D | - | - | - | - | - | - | - | - | 2 ～ 200 | - | - | 3 ～ 49 | - | - | - | - | ||
- | 1 Piece(s) | 14 Day(s) or more | 32 ～ 50 | Unfinished | One End Stepped | Straight | 20 ～ 800 | Precision Cleaning | A | D | - | - | - | - | - | - | - | - | 2 ～ 200 | - | - | 3 ～ 49 | - | - | - | - | ||
- | 1 Piece(s) | 14 Day(s) or more | 6 ～ 30 | Tapped | Straight | Straight | 20 ～ 800 | Precision Cleaning | B | A | - | 3 ～ 30 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 14 Day(s) or more | 32 ～ 50 | Tapped | Straight | Straight | 20 ～ 800 | Precision Cleaning | B | A | - | 3 ～ 30 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 14 Day(s) or more | 6 ～ 30 | Tapped | One End Stepped | Straight | 20 ～ 800 | Precision Cleaning | B | D | - | 3 ～ 30 | - | - | - | - | - | - | 2 ～ 200 | - | - | 2 ～ 49 | - | - | - | - | ||
- | 1 Piece(s) | 14 Day(s) or more | 32 ～ 50 | Tapped | One End Stepped | Straight | 20 ～ 800 | Precision Cleaning | B | D | - | 3 ～ 30 | - | - | - | - | - | - | 2 ～ 200 | - | - | 2 ～ 49 | - | - | - | - | ||
- | 1 Piece(s) | 14 Day(s) or more | 6 ～ 30 | Threaded | One End Stepped | Straight | 20 ～ 800 | Precision Cleaning | C | A | 2 ～ 150 | - | - | 0 ～ 90 | - | - | 3 ～ 30 | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 14 Day(s) or more | 6 ～ 30 | Threaded | One End Stepped | Straight | 20 ～ 800 | Precision Cleaning | C | A | 2 ～ 150 | - | - | 0 ～ 90 | - | - | - | 3 ～ 40 | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 14 Day(s) or more | 32 ～ 50 | Threaded | One End Stepped | Straight | 20 ～ 800 | Precision Cleaning | C | A | 2 ～ 150 | - | - | 0 ～ 90 | - | - | 3 ～ 30 | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 14 Day(s) or more | 32 ～ 50 | Threaded | One End Stepped | Straight | 20 ～ 800 | Precision Cleaning | C | A | 2 ～ 150 | - | - | 0 ～ 90 | - | - | - | 3 ～ 40 | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 14 Day(s) or more | 6 ～ 30 | Threaded | Both Ends Stepped | Straight | 20 ～ 800 | Precision Cleaning | C | D | 2 ～ 150 | - | - | 0 ～ 90 | - | - | 3 ～ 30 | - | 2 ～ 200 | - | - | 2 ～ 49 | - | - | - | - | ||
- | 1 Piece(s) | 14 Day(s) or more | 6 ～ 30 | Threaded | Both Ends Stepped | Straight | 20 ～ 800 | Precision Cleaning | C | D | 2 ～ 150 | - | - | 0 ～ 90 | - | - | - | 3 ～ 40 | 2 ～ 200 | - | - | 2 ～ 49 | - | - | - | - | ||
- | 1 Piece(s) | 14 Day(s) or more | 32 ～ 50 | Threaded | Both Ends Stepped | Straight | 20 ～ 800 | Precision Cleaning | C | D | 2 ～ 150 | - | - | 0 ～ 90 | - | - | 3 ～ 30 | - | 2 ～ 200 | - | - | 2 ～ 49 | - | - | - | - | ||
- | 1 Piece(s) | 14 Day(s) or more | 32 ～ 50 | Threaded | Both Ends Stepped | Straight | 20 ～ 800 | Precision Cleaning | C | D | 2 ～ 150 | - | - | 0 ～ 90 | - | - | - | 3 ～ 40 | 2 ～ 200 | - | - | 2 ～ 49 | - | - | - | - | ||
- | 1 Piece(s) | 14 Day(s) or more | 6 ～ 30 | Unfinished | One End Stepped | Straight | 20 ～ 800 | Precision Cleaning | D | A | 2 ～ 150 | - | - | - | - | 3 ～ 49 | - | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 14 Day(s) or more | 32 ～ 50 | Unfinished | One End Stepped | Straight | 20 ～ 800 | Precision Cleaning | D | A | 2 ～ 150 | - | - | - | - | 3 ～ 49 | - | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 14 Day(s) or more | 6 ～ 30 | Unfinished | Both Ends Stepped | Straight | 20 ～ 800 | Precision Cleaning | D | D | 2 ～ 150 | - | - | - | - | 3 ～ 49 | - | - | 2 ～ 200 | - | - | 3 ～ 49 | - | - | - | - | ||
- | 1 Piece(s) | 14 Day(s) or more | 32 ～ 50 | Unfinished | Both Ends Stepped | Straight | 20 ～ 800 | Precision Cleaning | D | D | 2 ～ 150 | - | - | - | - | 3 ～ 49 | - | - | 2 ～ 200 | - | - | 3 ～ 49 | - | - | - | - | ||
- | 1 Piece(s) | 14 Day(s) or more | 6 ～ 30 | Tapped | One End Stepped | Straight | 20 ～ 800 | Precision Cleaning | E | A | 2 ～ 150 | - | - | - | - | 3 ～ 49 | 3 ～ 30 | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 14 Day(s) or more | 32 ～ 50 | Tapped | One End Stepped | Straight | 20 ～ 800 | Precision Cleaning | E | A | 2 ～ 150 | - | - | - | - | 3 ～ 49 | 3 ～ 30 | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 14 Day(s) or more | 6 ～ 30 | Tapped | Both Ends Stepped | Straight | 20 ～ 800 | Precision Cleaning | E | D | 2 ～ 245 | - | - | - | - | 3 ～ 49 | 3 ～ 30 | - | 2 ～ 200 | - | - | 3 ～ 49 | - | - | - | - | ||
- | 1 Piece(s) | 14 Day(s) or more | 32 ～ 50 | Tapped | Both Ends Stepped | Straight | 20 ～ 800 | Precision Cleaning | E | D | 2 ～ 245 | - | - | - | - | 3 ～ 49 | 3 ～ 30 | - | 2 ～ 200 | - | - | 3 ～ 49 | - | - | - | - | ||
- | 1 Piece(s) | 14 Day(s) or more | 6 ～ 30 | Retaining Ring Grooves on Both Ends | Straight | Straight | 20 ～ 800 | Precision Cleaning | F | A | - | - | - | - | 2 ～ 800 | - | - | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 14 Day(s) or more | 32 ～ 50 | Retaining Ring Grooves on Both Ends | Straight | Straight | 20 ～ 800 | Precision Cleaning | F | A | - | - | - | - | 2 ～ 800 | - | - | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 14 Day(s) or more | 6 ～ 30 | Retaining Ring Grooves on Both Ends | One End Stepped | Straight | 20 ～ 800 | Precision Cleaning | F | D | - | - | - | - | 2 ～ 800 | - | - | - | 2 ～ 200 | - | - | 3 ～ 49 | - | - | - | - | ||
- | 1 Piece(s) | 14 Day(s) or more | 32 ～ 50 | Retaining Ring Grooves on Both Ends | One End Stepped | Straight | 20 ～ 800 | Precision Cleaning | F | D | - | - | - | - | 2 ～ 800 | - | - | - | 2 ～ 200 | - | - | 3 ～ 49 | - | - | - | - | ||
- | 1 Piece(s) | 14 Day(s) or more | 6 ～ 30 | Retaining Ring Grooves on Both Ends | One End Stepped | Straight | 20 ～ 800 | Precision Cleaning | G | A | 2 ～ 150 | - | - | - | 2 ～ 198 | 3 ～ 26 | - | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 14 Day(s) or more | 6 ～ 30 | Retaining Ring Grooves on Both Ends | One End Stepped | Straight | 20 ～ 800 | Precision Cleaning | G | A | 2 ～ 150 | - | - | - | 2 ～ 198 | 28 ～ 50 | - | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 14 Day(s) or more | 32 ～ 50 | Retaining Ring Grooves on Both Ends | One End Stepped | Straight | 20 ～ 800 | Precision Cleaning | G | A | 2 ～ 150 | - | - | - | 2 ～ 198 | 3 ～ 26 | - | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 14 Day(s) or more | 32 ～ 50 | Retaining Ring Grooves on Both Ends | One End Stepped | Straight | 20 ～ 800 | Precision Cleaning | G | A | 2 ～ 150 | - | - | - | 2 ～ 198 | 28 ～ 50 | - | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 14 Day(s) or more | 6 ～ 30 | Retaining Ring Grooves on Both Ends | Both Ends Stepped | Straight | 20 ～ 800 | Precision Cleaning | G | D | 2 ～ 150 | - | - | - | 2 ～ 198 | 3 ～ 26 | - | - | 2 ～ 200 | - | - | 3 ～ 49 | - | - | - | - | ||
- | 1 Piece(s) | 14 Day(s) or more | 6 ～ 30 | Retaining Ring Grooves on Both Ends | Both Ends Stepped | Straight | 20 ～ 800 | Precision Cleaning | G | D | 2 ～ 150 | - | - | - | 2 ～ 198 | 28 ～ 50 | - | - | 2 ～ 200 | - | - | 3 ～ 49 | - | - | - | - | ||
- | 1 Piece(s) | 14 Day(s) or more | 32 ～ 50 | Retaining Ring Grooves on Both Ends | Both Ends Stepped | Straight | 20 ～ 800 | Precision Cleaning | G | D | 2 ～ 150 | - | - | - | 2 ～ 198 | 3 ～ 26 | - | - | 2 ～ 200 | - | - | 3 ～ 49 | - | - | - | - | ||
- | 1 Piece(s) | 14 Day(s) or more | 32 ～ 50 | Retaining Ring Grooves on Both Ends | Both Ends Stepped | Straight | 20 ～ 800 | Precision Cleaning | G | D | 2 ～ 150 | - | - | - | 2 ～ 198 | 28 ～ 50 | - | - | 2 ～ 200 | - | - | 3 ～ 49 | - | - | - | - | ||
- | 1 Piece(s) | 14 Day(s) or more | 15 ～ 30 | Tapped | Straight | Straight | 20 ～ 800 | Precision Cleaning | J | A | - | 3 ～ 30 | 7 ～ 42 | - | - | - | - | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 14 Day(s) or more | 32 ～ 50 | Tapped | Straight | Straight | 20 ～ 800 | Precision Cleaning | J | A | - | 3 ～ 30 | 7 ～ 42 | - | - | - | - | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 14 Day(s) or more | 15 ～ 30 | Tapped | One End Stepped | Straight | 20 ～ 800 | Precision Cleaning | J | D | - | 3 ～ 30 | - | - | - | - | - | - | 2 ～ 200 | - | - | 3 ～ 49 | - | - | 7 ～ 42 | - | ||
- | 1 Piece(s) | 14 Day(s) or more | 32 ～ 50 | Tapped | One End Stepped | Straight | 20 ～ 800 | Precision Cleaning | J | D | - | 3 ～ 30 | - | - | - | - | - | - | 2 ～ 200 | - | - | 3 ～ 49 | - | - | 7 ～ 42 | - | ||
- | 1 Piece(s) | 14 Day(s) or more | 6 ～ 30 | Unfinished | Straight | Straight | 20 ～ 800 | Electrolytic Polishing + Precision Cleaning | A | A | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 14 Day(s) or more | 32 ～ 50 | Unfinished | Straight | Straight | 20 ～ 800 | Electrolytic Polishing + Precision Cleaning | A | A | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 14 Day(s) or more | 6 ～ 30 | Unfinished | One End Stepped | Straight | 20 ～ 800 | Electrolytic Polishing + Precision Cleaning | A | D | - | - | - | - | - | - | - | - | 2 ～ 200 | - | - | 3 ～ 49 | - | - | - | - | ||
- | 1 Piece(s) | 14 Day(s) or more | 32 ～ 50 | Unfinished | One End Stepped | Straight | 20 ～ 800 | Electrolytic Polishing + Precision Cleaning | A | D | - | - | - | - | - | - | - | - | 2 ～ 200 | - | - | 3 ～ 49 | - | - | - | - | ||
- | 1 Piece(s) | 14 Day(s) or more | 6 ～ 30 | Tapped | Straight | Straight | 20 ～ 800 | Electrolytic Polishing + Precision Cleaning | B | A | - | 3 ～ 30 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 14 Day(s) or more | 32 ～ 50 | Tapped | Straight | Straight | 20 ～ 800 | Electrolytic Polishing + Precision Cleaning | B | A | - | 3 ～ 30 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 14 Day(s) or more | 6 ～ 30 | Tapped | One End Stepped | Straight | 20 ～ 800 | Electrolytic Polishing + Precision Cleaning | B | D | - | 3 ～ 30 | - | - | - | - | - | - | 2 ～ 200 | - | - | 2 ～ 49 | - | - | - | - | ||
- | 1 Piece(s) | 14 Day(s) or more | 32 ～ 50 | Tapped | One End Stepped | Straight | 20 ～ 800 | Electrolytic Polishing + Precision Cleaning | B | D | - | 3 ～ 30 | - | - | - | - | - | - | 2 ～ 200 | - | - | 2 ～ 49 | - | - | - | - | ||
- | 1 Piece(s) | 14 Day(s) or more | 6 ～ 30 | Threaded | One End Stepped | Straight | 20 ～ 800 | Electrolytic Polishing + Precision Cleaning | C | A | 2 ～ 150 | - | - | 0 ～ 90 | - | - | 3 ～ 30 | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 14 Day(s) or more | 6 ～ 30 | Threaded | One End Stepped | Straight | 20 ～ 800 | Electrolytic Polishing + Precision Cleaning | C | A | 2 ～ 150 | - | - | 0 ～ 90 | - | - | - | 3 ～ 40 | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 14 Day(s) or more | 32 ～ 50 | Threaded | One End Stepped | Straight | 20 ～ 800 | Electrolytic Polishing + Precision Cleaning | C | A | 2 ～ 150 | - | - | 0 ～ 90 | - | - | 3 ～ 30 | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 14 Day(s) or more | 32 ～ 50 | Threaded | One End Stepped | Straight | 20 ～ 800 | Electrolytic Polishing + Precision Cleaning | C | A | 2 ～ 150 | - | - | 0 ～ 90 | - | - | - | 3 ～ 40 | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 14 Day(s) or more | 6 ～ 30 | Threaded | Both Ends Stepped | Straight | 20 ～ 800 | Electrolytic Polishing + Precision Cleaning | C | D | 2 ～ 150 | - | - | 0 ～ 90 | - | - | 3 ～ 30 | - | 2 ～ 200 | - | - | 2 ～ 49 | - | - | - | - | ||
- | 1 Piece(s) | 14 Day(s) or more | 6 ～ 30 | Threaded | Both Ends Stepped | Straight | 20 ～ 800 | Electrolytic Polishing + Precision Cleaning | C | D | 2 ～ 150 | - | - | 0 ～ 90 | - | - | - | 3 ～ 40 | 2 ～ 200 | - | - | 2 ～ 49 | - | - | - | - | ||
- | 1 Piece(s) | 14 Day(s) or more | 32 ～ 50 | Threaded | Both Ends Stepped | Straight | 20 ～ 800 | Electrolytic Polishing + Precision Cleaning | C | D | 2 ～ 150 | - | - | 0 ～ 90 | - | - | 3 ～ 30 | - | 2 ～ 200 | - | - | 2 ～ 49 | - | - | - | - | ||
- | 1 Piece(s) | 14 Day(s) or more | 32 ～ 50 | Threaded | Both Ends Stepped | Straight | 20 ～ 800 | Electrolytic Polishing + Precision Cleaning | C | D | 2 ～ 150 | - | - | 0 ～ 90 | - | - | - | 3 ～ 40 | 2 ～ 200 | - | - | 2 ～ 49 | - | - | - | - | ||
- | 1 Piece(s) | 14 Day(s) or more | 6 ～ 30 | Unfinished | One End Stepped | Straight | 20 ～ 800 | Electrolytic Polishing + Precision Cleaning | D | A | 2 ～ 150 | - | - | - | - | 3 ～ 49 | - | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 14 Day(s) or more | 32 ～ 50 | Unfinished | One End Stepped | Straight | 20 ～ 800 | Electrolytic Polishing + Precision Cleaning | D | A | 2 ～ 150 | - | - | - | - | 3 ～ 49 | - | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 14 Day(s) or more | 6 ～ 30 | Unfinished | Both Ends Stepped | Straight | 20 ～ 800 | Electrolytic Polishing + Precision Cleaning | D | D | 2 ～ 150 | - | - | - | - | 3 ～ 49 | - | - | 2 ～ 200 | - | - | 3 ～ 49 | - | - | - | - | ||
- | 1 Piece(s) | 14 Day(s) or more | 32 ～ 50 | Unfinished | Both Ends Stepped | Straight | 20 ～ 800 | Electrolytic Polishing + Precision Cleaning | D | D | 2 ～ 150 | - | - | - | - | 3 ～ 49 | - | - | 2 ～ 200 | - | - | 3 ～ 49 | - | - | - | - |
Loading...
Basic Information
| Environmentally friendly | RoHS Compliant (10 Substances) | Characteristics/Applications | Clean Washed | Material_02 | SUS304 |
|---|---|---|---|---|---|
| Hardness | Unhardened | Material Details | SUS304 | Keyway | Keyway Option (Alteration) |
| Surface Treatment_02 | Not Provided | D Tolerance | g6 (Ground) | Material Certificate | Available |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Payment Method
- Credit Card
-
- Debit Cart
-
- Net Banking
-
- UPI
-
- Cheque on delivery
-
- Online payment
-
Social Media
MISUMI India Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy
Thank you for your cooperation.
Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.
Privacy Policy