(!)NOTE : Windows 7 users won’t be able to use some latest features of eCatalog/WOS since Microsoft is ending support for Windows 7 on 14 Jan, 2020. Please upgrade your system for uninterrupted services.

Tel. Tel: 0124-4688 800 Email: cs@misumi.co.in 9:00am - 5:30pm (Monday to Saturday)

ものづくりの、明日を支える。MISUMI-VONA 生産材コマース

Webcode Seach | Series
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products
  • Viewed
    Products
  • My
    Components
  • Cart
Recently Viewed Products
X
My Components
X
Cart item(s)
X
Loading...

  • How can we improve?

    How can we improve?

    Feedback
    Name (Optional)
    E-mail Address (Optional)
    Tel (Optional)

    Thank you for your time.
    Your feedback is essential for our continuous improvement
    Privacy Policy

    Thank you for your cooperation.

    Thank you for your time.
    Your feedback is essential for our continuous improvement
    Please use the inquiry form.

    Privacy Policy

Configure

Clear All

Part number has not been determine

(894 Part Numbers Available)
Configure Remaining Specifications

Part Number Complete

SH-SSFHRW4-[15-200/0.1]-M2-N2
loading

Specification/Dimensions

  • Shaft Dia. D(mm)

    • 4
    • 5
    • 6
    • 8
    • 10
    • 12
    • 13
    • 15
    • 16
    • 17
    • 18
    • 20
    • 22
    • 25
    • 30
    • 35
    • 40
    • 50

    Clear

  • D Tolerance

    • h9 (Cold-drawn)
    • h7 (Ground)
    • g6 (Ground)

    Clear

  • Length L(mm)

     [15-800/0.1mm Unit(s)]

    Clear

  • Cleaning Method

    • Degreasing
    • Precision Cleaning
    • Electrolytic Polishing + Precision Cleaning

    Clear

  • Wrench Flatted

    • W/o Wrench Flats
    • With Wrench Flats
    • Wrench flats option (alteration)

    Clear

  • Tapped (Coarse / Effective Length: Nominal Diameter × 2) [M](㎜)

    • 3
    • 4
    • 5
    • 6
    • 8
    • 10
    • 12
    • 16
    • 20
    • 24
    • 30
    • 800

    Clear

  • Tapped (Coarse / Effective Length: Nominal Diameter × 2) [M](mm)

    • 2
    • 2.6
    • 3
    • 4
    • 5
    • 6
    • 20
    • 24
    • 800

    Clear

  • Tapped (Coarse / Effective Length: Nominal Diameter × 2) [N](mm)

    • 2
    • 2.6
    • 3
    • 4
    • 5
    • 6
    • 20
    • 24
    • 800

    Clear

  • Tapped (Coarse / Effective Length: Nominal Diameter × 2) [N](㎜)

    • 3
    • 4
    • 5
    • 6
    • 8
    • 10
    • 12
    • 16
    • 20
    • 24
    • 30
    • 800

    Clear

  • Tapped (Coarse(㎜)

    • 3
    • 4
    • 5
    • 6
    • 8
    • 10
    • 12
    • 16
    • 20
    • 800

    Clear

  • Tapped (Coarse(mm)

    • 20
    • 800

    Clear

  • Wrench Flats [SC](mm)

     [0-800/1mm Unit(s)]

    Clear

  • type

    • SH-SSFHRW
    • SH-SSFHRWS
    • SH-SSFMRW
    • SH-SSFMRWS
    • SH-SSFRW
    • SH-SSFRWS
    • SHD-SSFHRW
    • SHD-SSFHRWS
    • SHD-SSFMRW
    • SHD-SSFMRWS
    • SHD-SSFRW
    • SHD-SSFRWS
    • SL-SSFHRW
    • SL-SSFHRWS
    • SL-SSFMRW
    • SL-SSFMRWS
    • SL-SSFRW
    • SL-SSFRWS

    Clear

  • CAD

    • 2D
    • 3D

    Clear

Days to Ship

    • All
    • 11 Day(s) or Less

    Clear

Specify Alterations

[Clean & Pack] Rotary Shaft - Both Ends Tapped

[Clean & Pack] Rotary Shaft - Both Ends Tapped

Click this image to zoom it.

Move the mouse over or click the image to zoom

You can add up to 6 items per a category to the compare list.

Brand :

MISUMI

MISUMI

Part Number :
894 Part Numbers Available

SH-SSFHRW4-[15-200/0.1]-M2-N2

SH-SSFHRW5-[15-250/0.1]-M[2,2.6,3]-N[2,2.6,3]

SH-SSFHRW5-[15-250/0.1]-M[2,2.6,3]-ND3

SH-SSFHRW5-[15-250/0.1]-MD3-N[2,2.6,3]

SH-SSFHRW5-[15-250/0.1]-MD3-ND3

SH-SSFHRW6-[15-500/0.1]-M[2.6,3,4]-N[2.6,3,4]

SH-SSFHRW6-[15-500/0.1]-M[2.6,3,4]-ND[3,4]

SH-SSFHRW6-[15-500/0.1]-MD[3,4]-N[2.6,3,4]

SH-SSFHRW6-[15-500/0.1]-MD[3,4]-ND[3,4]

SH-SSFHRW8-[15-500/0.1]-M[2.6,3,4,5,6]-N[2.6,3,4,5,6]

SH-SSFHRW8-[15-500/0.1]-M[2.6,3,4,5,6]-ND[3,4,5,6]

SH-SSFHRW8-[15-500/0.1]-MD[3,4,5,6]-N[2.6,3,4,5,6]

SH-SSFHRW8-[15-500/0.1]-MD[3,4,5,6]-ND[3,4,5,6]

SH-SSFHRW10-[15-800/0.1]-M[3,4,5,6]-N[3,4,5,6]

SH-SSFHRW10-[15-800/0.1]-M[3,4,5,6]-ND[3,4,5,6]

SH-SSFHRW10-[15-800/0.1]-MD[3,4,5,6]-N[3,4,5,6]

SH-SSFHRW10-[15-800/0.1]-MD[3,4,5,6]-ND[3,4,5,6]

SH-SSFHRW12-[15-800/0.1]-M[3,4,5,6,8]-N[3,4,5,6,8]

SH-SSFHRW12-[15-800/0.1]-M[3,4,5,6,8]-ND[3,4,5,6,8]

SH-SSFHRW12-[15-800/0.1]-MD[3,4,5,6,8]-N[3,4,5,6,8]

SH-SSFHRW4-[15-200/0.1]-M2-N2
SH-SSFHRW4-[15-200/0.1]-M2-N2

Copy Part Number URL to Clipboard

The part number URL has been copied into your clipboard.

Close

loading
  • Order Qty :
  • Price :
    ---
  • Total Price :
    ---
  • Days to ship :
    ---

Select part number to Order Now/ Add to Cart

(i)

Caution

  • See here for related information such as technical information on cleaning effects and other cleaned product lineups.
  • Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product. Please be careful about the application location and storage environment.

CAD Download
My Components
My Components
Similar ProductsSimilar Products
Product DetailProduct Detail

Product Description

Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.
■Part Number for Clean & Pack Products
·Degreasing (Anti-rust single packing)　　　　: Part Number SL-□□
·Precision cleaning (Degassing double packing)　　　　: Part Number SH-□□
·Electrolytic polishing + precision cleaning (Degassing double packing): Part Number SHD-□□
Product Part NumberCleaning MethodPackaging TypeEffects Compared to Uncleaned ProductEnvironment (Standard)Process
SL-□□DegreasingAnti-rust packingOil removalGeneral environmentRegular assembly process
Post battery assembly process
SH-□□Precision cleaningDegassing double packingOil removal
Dust removal		Clean environment (Class 10 to 1,000)Battery assembly process
LCD-related post assembly process
In-vehicle camera assembly process
SHD-□□Electrolytic polishing + precision cleaningDegassing double packingOil removal
Dust removal
Outgas reduction		Vacuum environment
Clean environment (Class 10 to 1,000)		Pre-semiconductor process
Liquid crystal deposition process
Pre-OLED process
■Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.

Rotary shaft - Both Ends Tapped: Dimensional Drawing 1
■ Standard
■Wrench Flats
[ ! ] Surface roughness of Part D for h9 (Cold-drawn) is {{{attr1}}}. Surface roughness for h7 (Ground) and g6 (Ground) is {{{attr2}}}.

■Tolerance Table

Dh9 (Cold-drawn)h7 (Ground)g6 (Ground)
4 to 600−0.004
−0.030−0.012−0.012
8·1000−0.005
−0.036−0.015−0.014
12 to 1800−0.006
−0.043−0.018−0.017
20 to 3000−0.007
−0.052−0.021−0.020
35 to 5000−0.009
−0.062−0.025−0.025
Rotary shaft - Both Ends Tapped: Dimensional Drawing 2
■Circularity and Straightness
■Perpendicularity
■Circularity of Part D
DCircularity
M
overor Less
3130.004
13200.005
20400.006
40500.007
■Straightness
DStraightness
K
2·2.50.1
3·40.03
50.02
6 or more0.01
■Tolerances of L and Other Dimensions
DimensionDimension
Tolerance
overor Less
26±0.1
630±0.2
30120±0.3
120400±0.5
4001000±0.8
[ ! ] Circularity, straightness, and perpendicularity of Part D are not applicable to h9 (Cold-drawn).
TypeD Tolerance[M] MaterialCleaning Method
 StandardWrench FlatsCleaning MethodCleaning EnvironmentPackaging TypePacking Environment
(1)SL-SSFMRWSL-SSFMRWSh9 (Cold-drawn)SUS304DegreasingGeneral environmentAnti-rust packingGeneral environment
SH-SSFMRWSH-SSFMRWSPrecision cleaningClass 1,000Degassing double packingClass 10
SHD-SSFMRWSHD-SSFMRWSElectrolytic polishing + precision cleaning
(2)SL-SSFHRWSL-SSFHRWSh7 (Ground)SUS304DegreasingGeneral environmentAnti-rust packingGeneral environment
SH-SSFHRWSH-SSFHRWSPrecision cleaningClass 1,000Degassing double packingClass 10
SHD-SSFHRWSHD-SSFHRWSElectrolytic polishing + precision cleaning
(3)SL-SSFRWSL-SSFRWSg6 (Ground)SUS304DegreasingGeneral environmentAnti-rust packingGeneral environment
SH-SSFRWSH-SSFRWSPrecision cleaningClass 1,000Degassing double packingClass 10
SHD-SSFRWSHD-SSFRWSElectrolytic polishing + precision cleaning
[!] Products are packed by order quantity. Ex. If the order is for 20 pieces, they are packed in one package (incl. 20 pieces).
[!] See the details of degreasing, precision cleaning, and electrolytic polishing shown at the bottom of the specification table.

Specification Table

Part Number—L—M—N—SC
SL-SSFRW30—250—M12—N10  
SH-SSFRW25—200—M8—N12  
SHD-SSFRWS25—200—M8—N12—SC20
(1) h9 (Cold-drawn)
Part NumberL
0.1 mm Increments		M (coarse), N (Coarse)
Selection		SC
1 mm Increments
Wrench Flats Type only		Wℓ2
TypeD
StandardWrench Flats
SL-SSFMRW
SH-SSFMRW
SHD-SSFMRW		SL-SSFMRWS
SH-SSFMRWS
SHD-SSFMRWS		615.0 to 500.0 2.634         SC+ℓ2 ≤ L

SC = 0or SC ≥ 1

[ ! ] When SC ≤ M × 3,
W−M ≥ 2		58
815.0 to 500.0 2.63456       7
1015.0 to 800.0  3456       8
1215.0 to 800.0  34568      1010
1515.0 to 800.0  3456810     13
1615.0 to 800.0   45681012    14
2020.0 to 800.0   4568101216   17
2520.0 to 800.0   4568101216   22
3020.0 to 800.0    56810121620  2715
3570.0 to 800.0     681012162024 30
4080.0 to 800.0       1012162024303620
50100.0 to 800.0        121620243041
[ ! ] L ≥ M × 2 + N × 2 is required.

[!] When L ≤ (M × 2 + pilot hole depth) + (N × 2 + pilot hole depth), the tapped pilot hole is through, and the priority is given to the large tap effective length, so
the small tap effective length becomes shorter. (For MD and ND, L ≤ (MD × 3 + pilot hole depth) + (ND × 3 + pilot hole depth).)

(2) h7 (Ground)
Part NumberL
0.1 mm Increments		M (coarse), N (Coarse)
Selection		SC
1 mm Increments
Wrench Flats Type only		Wℓ2
TypeD
StandardWrench Flats

SL-SSFHRW
SH-SSFHRW
SHD-SSFHRW
SL-SSFHRWS
SH-SSFHRWS
SHD-SSFHRWS

(Wrench flats are not available for D4 and D5.)		415.0 to 200.02            ———
515.0 to 250.022.63          
615.0 to 500.0 2.634         SC+ℓ2 ≤ L

SC = 0or SC ≥ 1

[ ! ] When SC ≤ M × 3,
W−M ≥ 2		58
815.0 to 500.0 2.63456       7
1015.0 to 800.0  3456       8
1215.0 to 800.0  34568      1010
1515.0 to 800.0  3456810     13
1720.0 to 800.0   45681012    14
2020.0 to 800.0   4568101216   17
2520.0 to 800.0   4568101216   22
3020.0 to 800.0    56810121620  2715
3570.0 to 800.0     681012162024 30
4080.0 to 800.0       1012162024303620
50100.0 to 800.0        121620243041
[ ! ] L ≥ M × 2 + N × 2 is required.

[!] When L ≤ (M × 2 + pilot hole depth) + (N × 2 + pilot hole depth), the tapped pilot hole is through, and the priority is given to the large tap effective length, so
the small tap effective length becomes shorter. (For MD and ND, L ≤ (MD × 3 + pilot hole depth) + (ND × 3 + pilot hole depth).)

(3) g6 (Ground)
Part NumberL
0.1 mm Increments		M (coarse), N (Coarse)
Selection		SC
1 mm Increments
Wrench Flats Type only		Wℓ2
Type 
StandardWrench Flats

SL-SSFRW
SH-SSFRW
SHD-SSFRW
SL-SSFRWS
SH-SSFRWS
SHD-SSFRWS		 415.0 to 200.02            ———
 515.0 to 250.022.63          
 615.0 to 500.0 2.634         SC+ℓ2 ≤ L

SC = 0 or SC ≥ 1

[ ! ] When SC ≤ M × 3,
W−M ≥ 2		58
 815.0 to 500.0 2.63456       7
1015.0 to 800.0  3456       8
1215.0 to 800.0  34568      1010
1315.0 to 800.0  34568      11
1515.0 to 800.0  3456810     13
1615.0 to 800.0   45681012    14
1720.0 to 800.0   45681012    
1820.0 to 800.0   45681012    15
2020.0 to 800.0   4568101216   17
2220.0 to 800.0   4568101216   19
2520.0 to 800.0   4568101216   22
3020.0 to 800.0    56810121620  2715
3570.0 to 800.0     681012162024 30
4080.0 to 800.0       1012162024303620
50100.0 to 800.0        121620243041
[ ! ] L ≥ M × 2 + N × 2 is required.

[!] When L ≤ (M × 2 + pilot hole depth) + (N × 2 + pilot hole depth), the tapped pilot hole is through, and the priority is given to the large tap effective length, so
the small tap effective length becomes shorter. (For MD and ND, L ≤ (MD × 3 + pilot hole depth) + (ND × 3 + pilot hole depth).)

Coarse Thread Pitch
MPitch
20.4
2.60.45
30.5
40.7
50.8
61
81.25
101.5
121.75
162
202.5
243
303.5

Alterations

Part Number—L—M—N—(KC, WKC, FC, etc.)
SL-SSFRW10—150—M4—N6—LKC
Alterations
Code		Alteration DetailsApplicable ConditionsOrdering Example
KCKeyway at one location
Rotary Shaft - Both Ends Tapped: Related Image
KC, A = 0.1 mm Increments

[ ! ] When the keyway position is less than 1 mm away from the end face, R is not applied.

[ ! ] Keyway length ≤ 100
[NG] ø5 or less is not applicable		SL−SSFRW30−250−M10−N10−KC20−A10
WKCKeyways at two locations
Rotary Shaft - Both Ends Tapped: Related Image
WKC, C, K, E = 0.1 mm Increments

[ ! ] When the keyway position is less than 1 mm away from the end face, R is not applied.

[ ! ] Keyway length ≤ 100
[NG] ø5 or less is not applicable		SL−SSFRW30−250−M10−N10−WKC5−C20−K5−E10
KZKeyway at one location (for 4th location)
Rotary Shaft - Both Ends Tapped: Related Image
KZ, Z = 0.1 mm Increments

[ ! ] When the keyway position is less than 1 mm away from the end face, R is not applied.

[ ! ] Keyway length ≤ 100 [NG] ø5 or less is not applicable
[ ! ] Can be specified only when combined with both KC and WKC		SL−SSFRW30−250−M10−N10−KC20−A10−WKC50
−C10−K60−E10−KZ100−Z10
FCSet screw flat at one location
Rotary Shaft - Both Ends Tapped: Related Image
FC, G = 1 mm Increments
[ ! ]G ≤ 70		SL−SSFRW30−250−M10−N10−FC10−G3
WFCSet screw flats at two locations
Rotary Shaft - Both Ends Tapped: Related Image
WFC, J, W, V = 1 mm Increments
[ ! ]J·V ≤ 70		SL−SSFRW30−250−M10−N10−WFC10−J15−W10−V20
SFCSet Screw Flat, 2 Set Screw Flats (Angle Specified)
Rotary Shaft - Both Ends Tapped: Related Image
SFC, SG = 1 mm Increments AG = 15° Increments
[ ! ]SG ≤ 70		SL−SSFRW30−250−M10−N10−SFC10−SG3−AG120
UCSlit Cam Groove
Rotary Shaft - Both Ends Tapped: Related Image
UC = 1 mm Increments
[NG] D13 or more is not applicable		SL−SSFRW10−250−M80−N8−UC10
TA·TBRetaining Ring Groove
Rotary Shaft - Both Ends Tapped: Related Image
TA, TB = 0.1 mm Increments
[ ! ]2 ≤ TA·TB ≤ 150		SL−SSFRW30−250−M10−N10−TB10
LKCL Dimension Tolerance Change
Rotary Shaft - Both Ends Tapped: Related Image
L < 500···L±0.05 L ≥ 500···L±0.1
[NG] L800 or more is not applicable		SL−SSFRW30−250−M10−N10−LKC
MD·NDTapped Depth
Rotary Shaft - Both Ends Tapped: Related Image
To specify any of these Alterations, replace M with MD or N with ND
[NG] Not applicable when M = 2, 2.6, 24 or 30		SL−SSFRW30−250−MD10−ND10
[!] When combined with other alterations, ± 2 degree phase differential may occur. Provide 2 mm or more clearance between this alteration and others.
[ ! ] When multiple keyways or set screw flats are specified, they are added in the same plane. When the distance of the alterations are over 500 mm, ± 2 degree phase difference may occur.
Keyway Dimensions
Shaft Dia.btr
Reference DimensionTolerance (N9)Reference DimensionTolerance
6 to 72   -0.004
   -0.029		1.2 +0.1
   0		0.08 to 0.16
8 to 1031.8
11 to 124    0
   -0.03		2.5
13 to 1753.00.16 to 0.25
18 to 2263.5
23 to 308    0
   -0.036		4.0 +0.2
   0
31 to 38105.00.25 to 0.4
39 to 4412    0
   -0.043		5.0
45 to 50145.5
 
[Clean & Pack]Rotary Shaft - Both Ends Tapped: Related Image
[ ! ] b ≤ A, E, C ≤ 100
[ ! ] If 3 keyways are required, use both KC and WKC.
[!] If 4 keyways are required, use KC, WKC, and KZ. (KZ is applicable only when combined with both KC and WKC)
[NG] Not applicable to D = 2 to 5.
[ ! ] The example below shows the keyway shape for the specs KC, WKC, K = 0, KC + A ≥ L and WKC + C + K + E > L.
[Clean & Pack]Rotary Shaft - Both Ends Tapped: Related Image
[ ! ] Although keyway(s) and set screw flats are added in the same plane, ±2 degree phase differential may occur.
[ ! ] When the keyway position is less than 1 mm away from the end face, R is not applied.
[Clean & Pack]Rotary Shaft - Both Ends Tapped: Related Image
Detailed Retaining Ring Groove Dimensions for Rotary Shafts
Shaft Dia.d ToleranceSlot Width (m) ToleranceApplicable Retaining Ring
21.2 +0.06
    0		0.4 +0.05
    0		JIS E Type 1.2
2.51.50.5JIS E Type 1.5
32JIS E Type 2
430.7 +0.1
    0		JIS E Type 3
54 +0.075
    0		JIS E Type 4
65JIS E Type 5
760.9JIS E Type 6
87 +0.09
    0		JIS E Type 7
98JIS E Type 8
109.60/－0.091.15 +0.14
    0		JIS C Type 10
1110.5   0
  -0.11		JIS C Type 11
1211.5JIS C Type 12
1312.4JIS C Type 13
1413.4JIS C Type 14
1514.3JIS C Type 15
1615.2JIS C Type 16
1716.2JIS C Type 17
18171.35JIS C Type 18
1918JIS C Type 19
 
Shaft Dia.d ToleranceSlot Width (m) ToleranceApplicable Retaining Ring
2019  0
 -0.21		1.35 +0.14
    0		JIS C Type 20
2120JIS C Type 21
2221JIS C Type 22
2322JIS C Type 23
2422.9JIS C Type 24
2523.9JIS C Type 25
2624.9JIS C Type 26
2826.61.65JIS C Type 28
2927.6JIS C Type 29
3028.6JIS C Type 30
3230.3  0
 -0.25		JIS C Type 32
3533JIS C Type 35
40381.9JIS C Type 40
4542.5JIS C Type 45
50472.2JIS C Type 50
 
[Clean & Pack]Rotary Shaft - Both Ends Tapped: Related Image
[ ! ]2 ≤ TA·TB ≤ 150
[ ! ] An applicable retaining ring is included in the retaining ring groove.
Cleaning Process
·Degreasing (Part Number: SL-□□)

Working Environment: General environment


Alkaline warm pure water
 
 		       
Ultrasonic pure water cleaning
after cleaning with pure water　
*3 times
Dry
 
 
Anti-rust single packing
 
 
·Precision cleaning (Part Number: SH-□□)
 

Working Environment: Class 1,000

 

Working Environment: Class 10


Hydrocarbon cleaning
Ro water cleaning
 

 
After high-pressure water jet cleaning (Ro water) Wash with pure water (10 MΩ·cm)
 

 
Use pure water (13 MΩ·cm)
 

 
Use nitrogen blow

 

 
Conducted on a clean bench
in a Class 10 clean environment
·Electrolytic polishing + precision cleaning (Part Number: SHD-□□)
 

Working Environment: Class 1,000

 

Working Environment: Class 10


Hydrocarbon cleaning Ro water cleaning

 

 
Electrolytic polishing with an electrolytic polishing layer according to the material

 
After high-pressure water jet cleaning (Ro water) Wash with pure water (10 MΩ·cm)

 
Use warm pure water (13 MΩ·cm)

 

 
Use nitrogen blow


 

 
Conducted on a clean bench in a Class 10 clean environment
 
Packaging Example
For degreasing:
(Part Number: SL-□□)
For precision cleaning or electrolytic polishing + precision cleaning:
(Part Number: SH-□□/SHD-□□)

[ ! ] Both the first and second layer packaging are degassed.
Cleaning Effectiveness / Recommended Environment for Use

Cleaning Method

Product Part Number

Packaging Type

Effects Compared to Uncleaned Product

Environment (Standard)

Use Case and Process

DegreasingSL-□□Anti-rust packingOil removalGeneral environmentRegular assembly process
Post battery assembly process
Precision cleaningSH-□□Degassing double packingOil removal
Dust removal		Clean environment (Class 10 to 1,000)Battery assembly process
LCD-related post assembly process
In-vehicle camera assembly process
Electrolytic polishing + precision cleaningSHD-□□Degassing double packingOil removal
Dust removal
Outgas reduction		Vacuum environment
Clean environment (Class 10 to 1,000)		Pre-semiconductor process
Liquid crystal deposition process
Pre-OLED process

Part Number 

  • Incomplete part number.
    Please use left hand selections to complete a part number.
Loading...
30
45
60
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Next >>
Part Number
SH-SSFHRW4-[15-200/0.1]-M2-N2
SH-SSFHRW5-[15-250/0.1]-M[2,​2.6,​3]-N[2,​2.6,​3]
SH-SSFHRW5-[15-250/0.1]-M[2,​2.6,​3]-ND3
SH-SSFHRW5-[15-250/0.1]-MD3-N[2,​2.6,​3]
SH-SSFHRW5-[15-250/0.1]-MD3-ND3
SH-SSFHRW6-[15-500/0.1]-M[2.6,​3,​4]-N[2.6,​3,​4]
SH-SSFHRW6-[15-500/0.1]-M[2.6,​3,​4]-ND[3,​4]
SH-SSFHRW6-[15-500/0.1]-MD[3,​4]-N[2.6,​3,​4]
SH-SSFHRW6-[15-500/0.1]-MD[3,​4]-ND[3,​4]
SH-SSFHRW8-[15-500/0.1]-M[2.6,​3,​4,​5,​6]-N[2.6,​3,​4,​5,​6]
SH-SSFHRW8-[15-500/0.1]-M[2.6,​3,​4,​5,​6]-ND[3,​4,​5,​6]
SH-SSFHRW8-[15-500/0.1]-MD[3,​4,​5,​6]-N[2.6,​3,​4,​5,​6]
SH-SSFHRW8-[15-500/0.1]-MD[3,​4,​5,​6]-ND[3,​4,​5,​6]
SH-SSFHRW10-[15-800/0.1]-M[3,​4,​5,​6]-N[3,​4,​5,​6]
SH-SSFHRW10-[15-800/0.1]-M[3,​4,​5,​6]-ND[3,​4,​5,​6]
SH-SSFHRW10-[15-800/0.1]-MD[3,​4,​5,​6]-N[3,​4,​5,​6]
SH-SSFHRW10-[15-800/0.1]-MD[3,​4,​5,​6]-ND[3,​4,​5,​6]
SH-SSFHRW12-[15-800/0.1]-M[3,​4,​5,​6,​8]-N[3,​4,​5,​6,​8]
SH-SSFHRW12-[15-800/0.1]-M[3,​4,​5,​6,​8]-ND[3,​4,​5,​6,​8]
SH-SSFHRW12-[15-800/0.1]-MD[3,​4,​5,​6,​8]-N[3,​4,​5,​6,​8]
SH-SSFHRW12-[15-800/0.1]-MD[3,​4,​5,​6,​8]-ND[3,​4,​5,​6,​8]
SH-SSFHRW15-[15-800/0.1]-M[3,​4,​5,​6,​8,​10]-N[3,​4,​5,​6,​8,​10]
SH-SSFHRW15-[15-800/0.1]-M[3,​4,​5,​6,​8,​10]-ND[3,​4,​5,​6,​8,​10]
SH-SSFHRW15-[15-800/0.1]-MD[3,​4,​5,​6,​8,​10]-N[3,​4,​5,​6,​8,​10]
SH-SSFHRW15-[15-800/0.1]-MD[3,​4,​5,​6,​8,​10]-ND[3,​4,​5,​6,​8,​10]
SH-SSFHRW17-[20-800/0.1]-M[4,​5,​6,​8,​10,​12]-N[4,​5,​6,​8,​10,​12]
SH-SSFHRW17-[20-800/0.1]-M[4,​5,​6,​8,​10,​12]-ND[4,​5,​6,​8,​10,​12]
SH-SSFHRW17-[20-800/0.1]-MD[4,​5,​6,​8,​10,​12]-N[4,​5,​6,​8,​10,​12]
SH-SSFHRW17-[20-800/0.1]-MD[4,​5,​6,​8,​10,​12]-ND[4,​5,​6,​8,​10,​12]
SH-SSFHRW20-[20-800/0.1]-M[4,​5,​6,​8,​10,​12,​16]-N[4,​5,​6,​8,​10,​12,​16]
SH-SSFHRW20-[20-800/0.1]-M[4,​5,​6,​8,​10,​12,​16]-ND[4,​5,​6,​8,​10,​12,​16]
SH-SSFHRW20-[20-800/0.1]-MD[4,​5,​6,​8,​10,​12,​16]-N[4,​5,​6,​8,​10,​12,​16]
SH-SSFHRW20-[20-800/0.1]-MD[4,​5,​6,​8,​10,​12,​16]-ND[4,​5,​6,​8,​10,​12,​16]
SH-SSFHRW25-[20-800/0.1]-M[4,​5,​6,​8,​10,​12,​16]-N[4,​5,​6,​8,​10,​12,​16]
SH-SSFHRW25-[20-800/0.1]-M[4,​5,​6,​8,​10,​12,​16]-ND[4,​5,​6,​8,​10,​12,​16]
SH-SSFHRW25-[20-800/0.1]-MD[4,​5,​6,​8,​10,​12,​16]-N[4,​5,​6,​8,​10,​12,​16]
SH-SSFHRW25-[20-800/0.1]-MD[4,​5,​6,​8,​10,​12,​16]-ND[4,​5,​6,​8,​10,​12,​16]
SH-SSFHRW30-[20-800/0.1]-M[5,​6,​8,​10,​12,​16,​20]-N[5,​6,​8,​10,​12,​16,​20]
SH-SSFHRW30-[20-800/0.1]-M[5,​6,​8,​10,​12,​16,​20]-ND[5,​6,​8,​10,​12,​16,​20]
SH-SSFHRW30-[20-800/0.1]-MD[5,​6,​8,​10,​12,​16,​20]-N[5,​6,​8,​10,​12,​16,​20]
SH-SSFHRW30-[20-800/0.1]-MD[5,​6,​8,​10,​12,​16,​20]-ND[5,​6,​8,​10,​12,​16,​20]
SH-SSFHRW35-[70-800/0.1]-M[6,​8,​10,​12,​16,​20,​24]-N[6,​8,​10,​12,​16,​20,​24]
SH-SSFHRW35-[70-800/0.1]-M[6,​8,​10,​12,​16,​20,​24]-ND[6,​8,​10,​12,​16,​20]
SH-SSFHRW35-[70-800/0.1]-MD[6,​8,​10,​12,​16,​20]-N[6,​8,​10,​12,​16,​20,​24]
SH-SSFHRW35-[70-800/0.1]-MD[6,​8,​10,​12,​16,​20]-ND[6,​8,​10,​12,​16,​20]
SH-SSFHRW40-[80-800/0.1]-M[10,​12,​16,​20,​24,​30]-N[10,​12,​16,​20,​24,​30]
SH-SSFHRW40-[80-800/0.1]-M[10,​12,​16,​20,​24,​30]-ND[10,​12,​16,​20]
SH-SSFHRW40-[80-800/0.1]-MD[10,​12,​16,​20]-N[10,​12,​16,​20,​24,​30]
SH-SSFHRW40-[80-800/0.1]-MD[10,​12,​16,​20]-ND[10,​12,​16,​20]
SH-SSFHRW50-[100-800/0.1]-M[12,​16,​20,​24,​30]-N[12,​16,​20,​24,​30]
SH-SSFHRW50-[100-800/0.1]-M[12,​16,​20,​24,​30]-ND[12,​16,​20]
SH-SSFHRW50-[100-800/0.1]-MD[12,​16,​20]-N[12,​16,​20,​24,​30]
SH-SSFHRW50-[100-800/0.1]-MD[12,​16,​20]-ND[12,​16,​20]
SH-SSFHRWS6-[15-500/0.1]-M[2.6,​3,​4]-N[2.6,​3,​4]-SC[0-492/1]
SH-SSFHRWS6-[15-500/0.1]-M[2.6,​3,​4]-ND[3,​4]-SC[0-492/1]
SH-SSFHRWS6-[15-500/0.1]-MD[3,​4]-N[2.6,​3,​4]-SC[0-492/1]
SH-SSFHRWS6-[15-500/0.1]-MD[3,​4]-ND[3,​4]-SC[0-492/1]
SH-SSFHRWS8-[15-500/0.1]-M[2.6,​3,​4,​5,​6]-N[2.6,​3,​4,​5,​6]-SC[0-492/1]
SH-SSFHRWS8-[15-500/0.1]-M[2.6,​3,​4,​5,​6]-ND[3,​4,​5,​6]-SC[0-492/1]
SH-SSFHRWS8-[15-500/0.1]-MD[3,​4,​5,​6]-N[2.6,​3,​4,​5,​6]-SC[0-492/1]
Part NumberPriceMinimum Order Qty.Volume DiscountDays to ShipShaft Dia. D
(mm) 		D Tolerance Length L
(mm) 		Cleaning Method Wrench Flatted Tapped (Coarse / Effective Length: Nominal Diameter × 2) [M]
(㎜) 		Tapped (Coarse / Effective Length: Nominal Diameter × 2) [M]
(mm) 		Tapped (Coarse / Effective Length: Nominal Diameter × 2) [N]
(mm) 		Tapped (Coarse / Effective Length: Nominal Diameter × 2) [N]
(㎜) 		Tapped (Coarse
(㎜) 		Tapped (Coarse
(mm) 		Wrench Flats [SC]
(mm)

-

1 Piece(s) 11 Day(s) or more 4h7 (Ground)15 ～ 200Precision CleaningW/o Wrench Flats-22----

-

1 Piece(s) 11 Day(s) or more 5h7 (Ground)15 ～ 250Precision CleaningW/o Wrench Flats-2 ～ 32 ～ 3----

-

1 Piece(s) 11 Day(s) or more 5h7 (Ground)15 ～ 250Precision CleaningW/o Wrench Flats-2 ～ 3--3--

-

1 Piece(s) 11 Day(s) or more 5h7 (Ground)15 ～ 250Precision CleaningW/o Wrench Flats--2 ～ 3-3--

-

1 Piece(s) 11 Day(s) or more 5h7 (Ground)15 ～ 250Precision CleaningW/o Wrench Flats----3--

-

1 Piece(s) 11 Day(s) or more 6h7 (Ground)15 ～ 500Precision CleaningW/o Wrench Flats-2.6 ～ 42.6 ～ 4----

-

1 Piece(s) 11 Day(s) or more 6h7 (Ground)15 ～ 500Precision CleaningW/o Wrench Flats-2.6 ～ 4--3 ～ 4--

-

1 Piece(s) 11 Day(s) or more 6h7 (Ground)15 ～ 500Precision CleaningW/o Wrench Flats--2.6 ～ 4-3 ～ 4--

-

1 Piece(s) 11 Day(s) or more 6h7 (Ground)15 ～ 500Precision CleaningW/o Wrench Flats----3 ～ 4--

-

1 Piece(s) 11 Day(s) or more 8h7 (Ground)15 ～ 500Precision CleaningW/o Wrench Flats-2.6 ～ 62.6 ～ 6----

-

1 Piece(s) 11 Day(s) or more 8h7 (Ground)15 ～ 500Precision CleaningW/o Wrench Flats-2.6 ～ 6--3 ～ 6--

-

1 Piece(s) 11 Day(s) or more 8h7 (Ground)15 ～ 500Precision CleaningW/o Wrench Flats--2.6 ～ 6-3 ～ 6--

-

1 Piece(s) 11 Day(s) or more 8h7 (Ground)15 ～ 500Precision CleaningW/o Wrench Flats----3 ～ 6--

-

1 Piece(s) 11 Day(s) or more 10h7 (Ground)15 ～ 800Precision CleaningW/o Wrench Flats3 ～ 6--3 ～ 6---

-

1 Piece(s) 11 Day(s) or more 10h7 (Ground)15 ～ 800Precision CleaningW/o Wrench Flats3 ～ 6---3 ～ 6--

-

1 Piece(s) 11 Day(s) or more 10h7 (Ground)15 ～ 800Precision CleaningW/o Wrench Flats---3 ～ 63 ～ 6--

-

1 Piece(s) 11 Day(s) or more 10h7 (Ground)15 ～ 800Precision CleaningW/o Wrench Flats----3 ～ 6--

-

1 Piece(s) 11 Day(s) or more 12h7 (Ground)15 ～ 800Precision CleaningW/o Wrench Flats3 ～ 8--3 ～ 8---

-

1 Piece(s) 11 Day(s) or more 12h7 (Ground)15 ～ 800Precision CleaningW/o Wrench Flats3 ～ 8---3 ～ 8--

-

1 Piece(s) 11 Day(s) or more 12h7 (Ground)15 ～ 800Precision CleaningW/o Wrench Flats---3 ～ 83 ～ 8--

-

1 Piece(s) 11 Day(s) or more 12h7 (Ground)15 ～ 800Precision CleaningW/o Wrench Flats----3 ～ 8--

-

1 Piece(s) 11 Day(s) or more 15h7 (Ground)15 ～ 800Precision CleaningW/o Wrench Flats3 ～ 10--3 ～ 10---

-

1 Piece(s) 11 Day(s) or more 15h7 (Ground)15 ～ 800Precision CleaningW/o Wrench Flats3 ～ 10---3 ～ 10--

-

1 Piece(s) 11 Day(s) or more 15h7 (Ground)15 ～ 800Precision CleaningW/o Wrench Flats---3 ～ 103 ～ 10--

-

1 Piece(s) 11 Day(s) or more 15h7 (Ground)15 ～ 800Precision CleaningW/o Wrench Flats----3 ～ 10--

-

1 Piece(s) 11 Day(s) or more 17h7 (Ground)20 ～ 800Precision CleaningW/o Wrench Flats4 ～ 12--4 ～ 12---

-

1 Piece(s) 11 Day(s) or more 17h7 (Ground)20 ～ 800Precision CleaningW/o Wrench Flats4 ～ 12---4 ～ 12--

-

1 Piece(s) 11 Day(s) or more 17h7 (Ground)20 ～ 800Precision CleaningW/o Wrench Flats---4 ～ 124 ～ 12--

-

1 Piece(s) 11 Day(s) or more 17h7 (Ground)20 ～ 800Precision CleaningW/o Wrench Flats----4 ～ 12--

-

1 Piece(s) 11 Day(s) or more 20h7 (Ground)20 ～ 800Precision CleaningW/o Wrench Flats4 ～ 16--4 ～ 16---

-

1 Piece(s) 11 Day(s) or more 20h7 (Ground)20 ～ 800Precision CleaningW/o Wrench Flats4 ～ 16---4 ～ 16--

-

1 Piece(s) 11 Day(s) or more 20h7 (Ground)20 ～ 800Precision CleaningW/o Wrench Flats---4 ～ 164 ～ 16--

-

1 Piece(s) 11 Day(s) or more 20h7 (Ground)20 ～ 800Precision CleaningW/o Wrench Flats----4 ～ 16--

-

1 Piece(s) 11 Day(s) or more 25h7 (Ground)20 ～ 800Precision CleaningW/o Wrench Flats4 ～ 16--4 ～ 16---

-

1 Piece(s) 11 Day(s) or more 25h7 (Ground)20 ～ 800Precision CleaningW/o Wrench Flats4 ～ 16---4 ～ 16--

-

1 Piece(s) 11 Day(s) or more 25h7 (Ground)20 ～ 800Precision CleaningW/o Wrench Flats---4 ～ 164 ～ 16--

-

1 Piece(s) 11 Day(s) or more 25h7 (Ground)20 ～ 800Precision CleaningW/o Wrench Flats----4 ～ 16--

-

1 Piece(s) 11 Day(s) or more 30h7 (Ground)20 ～ 800Precision CleaningW/o Wrench Flats5 ～ 1620205 ～ 16---

-

1 Piece(s) 11 Day(s) or more 30h7 (Ground)20 ～ 800Precision CleaningW/o Wrench Flats5 ～ 1620--5 ～ 1620-

-

1 Piece(s) 11 Day(s) or more 30h7 (Ground)20 ～ 800Precision CleaningW/o Wrench Flats--205 ～ 165 ～ 1620-

-

1 Piece(s) 11 Day(s) or more 30h7 (Ground)20 ～ 800Precision CleaningW/o Wrench Flats----5 ～ 1620-

-

1 Piece(s) 11 Day(s) or more 35h7 (Ground)70 ～ 800Precision CleaningW/o Wrench Flats6 ～ 2024246 ～ 20---

-

1 Piece(s) 11 Day(s) or more 35h7 (Ground)70 ～ 800Precision CleaningW/o Wrench Flats6 ～ 2024--6 ～ 20--

-

1 Piece(s) 11 Day(s) or more 35h7 (Ground)70 ～ 800Precision CleaningW/o Wrench Flats--246 ～ 206 ～ 20--

-

1 Piece(s) 11 Day(s) or more 35h7 (Ground)70 ～ 800Precision CleaningW/o Wrench Flats----6 ～ 20--

-

1 Piece(s) 11 Day(s) or more 40h7 (Ground)80 ～ 800Precision CleaningW/o Wrench Flats10 ～ 30--10 ～ 30---

-

1 Piece(s) 11 Day(s) or more 40h7 (Ground)80 ～ 800Precision CleaningW/o Wrench Flats10 ～ 30---10 ～ 20--

-

1 Piece(s) 11 Day(s) or more 40h7 (Ground)80 ～ 800Precision CleaningW/o Wrench Flats---10 ～ 3010 ～ 20--

-

1 Piece(s) 11 Day(s) or more 40h7 (Ground)80 ～ 800Precision CleaningW/o Wrench Flats----10 ～ 20--

-

1 Piece(s) 11 Day(s) or more 50h7 (Ground)100 ～ 800Precision CleaningW/o Wrench Flats12 ～ 30--12 ～ 30---

-

1 Piece(s) 11 Day(s) or more 50h7 (Ground)100 ～ 800Precision CleaningW/o Wrench Flats12 ～ 30---12 ～ 20--

-

1 Piece(s) 11 Day(s) or more 50h7 (Ground)100 ～ 800Precision CleaningW/o Wrench Flats---12 ～ 3012 ～ 20--

-

1 Piece(s) 11 Day(s) or more 50h7 (Ground)100 ～ 800Precision CleaningW/o Wrench Flats----12 ～ 20--

-

1 Piece(s) 11 Day(s) or more 6h7 (Ground)15 ～ 500Precision CleaningWith Wrench Flats-2.6 ～ 42.6 ～ 4---0 ～ 492

-

1 Piece(s) 11 Day(s) or more 6h7 (Ground)15 ～ 500Precision CleaningWith Wrench Flats-2.6 ～ 4--3 ～ 4-0 ～ 492

-

1 Piece(s) 11 Day(s) or more 6h7 (Ground)15 ～ 500Precision CleaningWith Wrench Flats--2.6 ～ 4-3 ～ 4-0 ～ 492

-

1 Piece(s) 11 Day(s) or more 6h7 (Ground)15 ～ 500Precision CleaningWith Wrench Flats----3 ～ 4-0 ～ 492

-

1 Piece(s) 11 Day(s) or more 8h7 (Ground)15 ～ 500Precision CleaningWith Wrench Flats-2.6 ～ 62.6 ～ 6---0 ～ 492

-

1 Piece(s) 11 Day(s) or more 8h7 (Ground)15 ～ 500Precision CleaningWith Wrench Flats-2.6 ～ 6--3 ～ 6-0 ～ 492

-

1 Piece(s) 11 Day(s) or more 8h7 (Ground)15 ～ 500Precision CleaningWith Wrench Flats--2.6 ～ 6-3 ～ 6-0 ～ 492

Loading...

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Next >>

Basic Information

Environmentally friendly RoHS Compliant (10 Substances) End Shape (Left) Tapped Characteristics/Applications Clean Washed
Basic Shape_02 Straight End Shape (Right) Tapped Material_02 SUS304
Hardness Unhardened Material Details SUS304 Keyway Keyway Option (Alteration)
Surface Treatment_02 Not Provided Material Certificate Available

Payment Method

Credit Card
  • American Express
  • Diners Club
  • MasterCard
  • RuPay
Debit Cart
  • VISA
  • MasterCard
  • Maestro
  • RuPay
Net Banking
  • State Bank of India
  • ICICI Bank
  • HDFC Bank
  • Kotak Mahindra Bank
  • Axis Bank
UPI
  • Bharat Interface for Money
  • PhonePe
  • Google Pay
  • paytm
  • WhatsApp
  • BharatQR
Cheque on delivery
  • Cheque on delivery
Online payment
  • easebuzz
  • qr code

Customer Service

My Account

About MISUMI

Related Sites

Social Media

  • LinkedIn
  • YouTube
  • Twitter

MISUMI India Contact

Customer Service

  • Tel:+91-124-468-8800　(9:00AM - 5:30PM Monday to Saturday)
  • Mail:CS@misumi.co.in　(English Only)
Web Inquiry

日本語でのお問い合わせはジャパンデスクまで

  • Tel:+91-124-468-8808　(9:00AM - 5:30PM 月-金、9:00AM - 1:00PM 土)
  • Mail:japandesk@misumi.co.in　(Japanese Language Only)
Mobile View

Copyright © MISUMI Corporation All Rights Reserved.