Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(44 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

SH-SSFRHQ6-[15-496/0.1]-F[2-25/0.1]-P[3-5/1]-T[2-25/0.1]-Q[3-5/1]

Environmentally friendly Shaft Dia. D D Tolerance Length L Wrench Flatted F P Q T type Cleaning Method CAD Days to Ship

Specification/Dimensions

Environmentally friendly
- RoHS Compliant (10 Substances)
Clear
Shaft Dia. D(mm)
6

8

10

12

13

15

16

17

18

20

22

25

30

35

40

50
Clear
D Tolerance
- h9 (Cold-drawn)
- h7 (Ground)
- g6 (Ground)
Clear
Length L(mm)
[15-800/0.1mm Unit(s)]
Clear
Wrench Flatted
- Wrench flats option (alteration)
Clear
F(㎜)
[2-245/0.1㎜ Unit(s)]
Clear
P(㎜)
[3-49/1㎜ Unit(s)]
Clear
Q(㎜)
[3-49/1㎜ Unit(s)]
Clear
T(㎜)
[2-245/0.1㎜ Unit(s)]
Clear
type
- SH-SSFRHQ
- SH-SSFRMGQ
- SH-SSFRMHQ
- SH-SSFRQ
- SHD-SSFRHQ
- SHD-SSFRMGQ
- SHD-SSFRMHQ
- SHD-SSFRQ
- SL-SSFRHQ
- SL-SSFRMGQ
- SL-SSFRMHQ
- SL-SSFRQ
Clear
Cleaning Method
- Degreasing
- Precision Cleaning
- Electrolytic Polishing + Precision Cleaning
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

11 Day(s) or Less
Clear

Specify Alterations

[Clean & Pack] Rotary Shaft - Both Ends Stepped

Name: [Clean & Pack] Rotary Shaft - Both Ends Stepped
Brand: MISUMI
Availability: PreOrder

Click this image to zoom it.

Move the mouse over or click the image to zoom

Brand :

MISUMI

Part Number :

SH-SSFRHQ6-[15-496/0.1]-F[2-25/0.1]-P[3-5/1]-T[2-25/0.1]-Q[3-5/1]

SH-SSFRHQ8-[15-496/0.1]-F[2-35/0.1]-P[3-7/1]-T[2-35/0.1]-Q[3-7/1]

SH-SSFRHQ10-[15-796/0.1]-F[2-45/0.1]-P[3-9/1]-T[2-45/0.1]-Q[3-9/1]

SH-SSFRHQ12-[15-800/0.1]-F[2-55/0.1]-P[3-11/1]-T[2-55/0.1]-Q[3-11/1]

SH-SSFRHQ15-[15-800/0.1]-F[2-70/0.1]-P[4-14/1]-T[2-70/0.1]-Q[4-14/1]

SH-SSFRHQ17-[24-800/0.1]-F[2-80/0.1]-P[5-16/1]-T[2-80/0.1]-Q[5-16/1]

SH-SSFRHQ20-[24-800/0.1]-F[2-95/0.1]-P[5-19/1]-T[2-95/0.1]-Q[5-19/1]

SH-SSFRHQ25-[24-800/0.1]-F[2-120/0.1]-P[8-24/1]-T[2-120/0.1]-Q[8-24/1]

SH-SSFRHQ30-[24-800/0.1]-F[2-145/0.1]-P[8-29/1]-T[2-145/0.1]-Q[8-29/1]

SH-SSFRHQ35-[40-800/0.1]-F[2-170/0.1]-P[16-34/1]-T[2-170/0.1]-Q[16-34/1]

SH-SSFRHQ40-[40-800/0.1]-F[2-195/0.1]-P[16-39/1]-T[2-195/0.1]-Q[16-39/1]

SH-SSFRHQ50-[40-800/0.1]-F[2-245/0.1]-P[16-49/1]-T[2-245/0.1]-Q[16-49/1]

SH-SSFRMGQ8-[15-496/0.1]-F[2-35/0.1]-P[3-7/1]-T[2-35/0.1]-Q[3-7/1]

SH-SSFRMGQ10-[15-796/0.1]-F[2-45/0.1]-P[3-9/1]-T[2-45/0.1]-Q[3-9/1]

SH-SSFRMGQ12-[15-800/0.1]-F[2-55/0.1]-P[3-11/1]-T[2-55/0.1]-Q[3-11/1]

SH-SSFRMGQ15-[15-800/0.1]-F[2-70/0.1]-P[4-14/1]-T[2-70/0.1]-Q[4-14/1]

SH-SSFRMGQ20-[24-800/0.1]-F[2-95/0.1]-P[5-19/1]-T[2-95/0.1]-Q[5-19/1]

SH-SSFRMGQ25-[24-800/0.1]-F[2-120/0.1]-P[8-24/1]-T[2-120/0.1]-Q[8-24/1]

SH-SSFRMGQ30-[24-800/0.1]-F[2-145/0.1]-P[8-29/1]-T[2-145/0.1]-Q[8-29/1]

SH-SSFRMGQ35-[40-800/0.1]-F[2-170/0.1]-P[16-34/1]-T[2-170/0.1]-Q[16-34/1]

SH-SSFRHQ6-[15-496/0.1]-F[2-25/0.1]-P[3-5/1]-T[2-25/0.1]-Q[3-5/1]

Order Qty :
Price :

---
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

(i)
Caution

See here for related information such as technical information on cleaning effects and other cleaned product lineups.
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product. Please be careful about the application location and storage environment.

Product Description

Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

■Part Number for Clean & Pack Products

·Degreasing (Anti-rust single packing)	: Part Number SL-□□
·Precision cleaning (Degassing double packing)	: Part Number SH-□□
·Electrolytic polishing + precision cleaning (Degassing double packing)	: Part Number SHD-□□

Product Part Number	Cleaning Method	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Process
SL-□□	Degreasing	Anti-rust packing	Oil removal	General environment	Regular assembly process
					Post battery assembly process
SH-□□	Precision cleaning	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
					LCD-related post assembly process
					In-vehicle camera assembly process
SHD-□□	Electrolytic polishing + precision cleaning	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
					Liquid crystal deposition process
					Pre-OLED process

■Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.

[Clean & Pack]Rotary Shaft - Both Ends Stepped: Related Image

■ Standard

[ ! ] Surface roughness of Part D for h9 (Cold-drawn) is {{{attr1}}}

. Surface roughness for h7 (Ground) and g6 (Ground) is [Clean & Pack]Rotary Shaft - Both Ends Stepped: Related Image

■Tolerance Table

D·P	h9 (Cold-drawn)	h7 (Ground)	g6 (Ground)
3	0 − 0.025	0 − 0.010	− 0.002
			− 0.008
3.1 〜 6	0 − 0.030	0 − 0.012	− 0.004
			− 0.012
6.1 〜 10	0 − 0.036	0 − 0.015	− 0.005
			− 0.014
10.1 〜 18	0 − 0.043	0 − 0.018	− 0.006
			− 0.017
18.1 〜 30	0 − 0.052	0 − 0.021	− 0.007
			− 0.020
30.1 〜 50	0 − 0.062	0 − 0.025	− 0.009
			− 0.025

■Circularity and Straightness

■Concentricity and Perpendicularity

■Circularity of Part D

D		Circularity M
over	or Less	Circularity M
5	13	0.004
13	20	0.005
20	40	0.006
40	50	0.007

■Tolerances of L and Other Dimensions

Dimension		Dimension Tolerance
over	or Less	Dimension Tolerance
2	6	±0.1
6	30	±0.2
30	120	±0.3
120	400	±0.5
400	1000	±0.8

[ ! ] Circularity, straightness, concentricity, and perpendicularity of Part D are not applicable to h9 (Cold-drawn).

Type		Tolerance		[M] Material	Cleaning Method
		D	P·Q		Cleaning Method	Cleaning Environment	Packaging Type	Packing Environment
(1)	SL-SSFRMHQ	h9 (Cold-drawn)	h7	SUS304	Degreasing	General environment	Anti-rust packing	General environment
	SH-SSFRMHQ				Precision cleaning	Class 1,000	Degassing double packing	Class 10
	SHD-SSFRMHQ				Electrolytic polishing + precision cleaning
(2)	SL-SSFRMGQ		g6	SUS304	Degreasing	General environment	Anti-rust packing	General environment
	SH-SSFRMGQ				Precision cleaning	Class 1,000	Degassing double packing	Class 10
	SHD-SSFRMGQ				Electrolytic polishing + precision cleaning
(3)	SL-SSFRHQ	h7 (Ground)	h7	SUS304	Degreasing	General environment	Anti-rust packing	General environment
	SH-SSFRHQ				Precision cleaning	Class 1,000	Degassing double packing	Class 10
	SHD-SSFRHQ				Electrolytic polishing + precision cleaning
(4)	SL-SSFRQ	g6 (Ground)	g6	SUS304	Degreasing	General environment	Anti-rust packing	General environment
	SH-SSFRQ				Precision cleaning	Class 1,000	Degassing double packing	Class 10
	SHD-SSFRQ				Electrolytic polishing + precision cleaning

[!] Products are packed by order quantity. Ex. If the order is for 20 pieces, they are packed in one package (incl. 20 pieces).
[!] See the details of degreasing, precision cleaning, and electrolytic polishing shown at the bottom of the

specification table.

Specification Table

Part Number	—	L	—	F	—	P	—	T	—	Q
SL-SSFRQ15	—	150	—	F15	—	P8	—	T15	—	Q8
SH-SSFRQ20	—	325	—	F25	—	P10	—	T25	—	Q10
SHD-SSFRQ30	—	400	—	F28	—	P20	—	T28	—	Q20

(1) D Tolerance h9 (Cold-drawn) / P, Q Tolerance h7 (2) D Tolerance h9 (Cold-drawn) / P, Q Tolerance g6

Part Number			0.1 mm Increments		1 mm Increments	(Y) max.
Type		D	L	F·T	P·Q	(Y) max.
(1) D Tol. h9 / P, Q Tol. h7 SL-SSFRMHQ SH-SSFRMHQ SHD-SSFRMHQ	(2) D Tol. h9 / P, Q Tol. g6 SL-SSFRMGQ SH-SSFRMGQ SHD-SSFRMGQ	6	15.0 to 496.0	2 ≤ F ≤ P × 5 2 ≤ T ≤ Q × 5	3 4 5	500
		8	15.0 to 496.0		3 ≤ P·Q < D	500
		10	15.0 to 796.0			800
		12	15.0 to 800.0			804
		15	15.0 to 800.0		4 ≤ P·Q < D
		16	15.0 to 800.0		4 ≤ P·Q < D
		20	24.0 to 800.0		5 ≤ P·Q < D
		25	24.0 to 800.0		8 ≤ P·Q < D
		30	24.0 to 800.0		8 ≤ P·Q < D
		35	40.0 to 800.0		16 ≤ P·Q < D

(3) h7 (Ground)

Part Number		0.1 mm Increments		1 mm Increments	(Y) max.
Type	D	L	F·T	P·Q	(Y) max.
SL-SSFRHQ SH-SSFRHQ SHD-SSFRHQ	6	15.0 to 496.0	2 ≤ F ≤ P × 5 2 ≤ T ≤ Q × 5	3 4 5	500
	8	15.0 to 496.0		3 ≤ P·Q < D	500
	10	15.0 to 796.0			800
	12	15.0 to 800.0			804
	15	15.0 to 800.0		4 ≤ P·Q < D
	17	24.0 to 800.0		5 ≤ P·Q < D
	20	24.0 to 800.0		5 ≤ P·Q < D
	25	24.0 to 800.0		8 ≤ P·Q < D
	30	24.0 to 800.0		8 ≤ P·Q < D
	35	40.0 to 800.0		16 ≤ P·Q < D
	40	40.0 to 800.0
	50	40.0 to 800.0

(4) g6 (Ground)

Part Number		0.1 mm Increments		1 mm Increments	(Y) max.
Type	D	L	F·T	P·Q	(Y) max.
SL-SSFRQ SH-SSFRQ SHD-SSFRQ	6	15.0 to 496.0	2 ≤ F ≤ P × 5 2 ≤ T ≤ Q × 5	3 4 5	500
	8	15.0 to 496.0		3 ≤ P·Q < D	500
	10	15.0 to 796.0			800
	12	15.0 to 800.0			804
	13	15.0 to 800.0		4 ≤ P·Q < D
	15	15.0 to 800.0
	16	15.0 to 800.0
	17	24.0 to 800.0		5 ≤ P·Q < D
	18	24.0 to 800.0
	20	24.0 to 800.0
	22	24.0 to 800.0		6 ≤ P·Q < D
	25	24.0 to 800.0		8 ≤ P·Q < D
	30	24.0 to 800.0		8 ≤ P·Q < D
	35	40.0 to 800.0		16 ≤ P·Q < D
	40	40.0 to 800.0
	50	40.0 to 800.0

[ ! ] When D - P (Q) ≤ 2, chamfer C at the step is 0.2 or less.
[ ! ] For P and Q Dimensions 27, 31, 33, 34, 36, 37, 38, 39, 41, 42, 43, 44, 46, 47, 48, 49 cannot be specified.

Alterations

Part Number	—	L	—	F	—	P	—	T	—	Q	—	(KC, WKC, FC, etc.)
SH-SSFRQ30	—	300	—	F25	—	P10	—	T25	—	Q10	—	KC40 －A20

Alterations
Code

Alteration Details

Applicable Conditions

Ordering Example

Keyway at one location

KC, A = 0.1 mm Increments

[ ! ] When the keyway position is less than 1 mm away from the end face,
R is not applied.

[ ! ] Keyway length ≤ 100
[NG] ø5 or less is not applicable

SH−SSFRQ30−300−F25−P10−T25−Q10−KC20−A10

WKC

Keyways at two locations

WKC, C, K, E = 0.1 mm Increments

[ ! ] When the keyway position is less than 1 mm away from the end face,
R is not applied.

[ ! ] Keyway length ≤ 100
[NG] ø5 or less is not applicable

SH−SSFRQ30−300−F25−P10−T25−Q10−WKC5−C20−K5−E10

Keyway at one location (for 4th location)

KZ, Z = 0.1 mm Increments

[ ! ] When the keyway position is less than 1 mm away from the end face,
R is not applied.

[ ! ] Keyway length ≤ 100 [NG] ø5 or less is not applicable
[ ! ] Can be specified only when combined with both KC and WKC

SH−SSFRQ30−300−F25−P10−T25−Q10−KC5−A10−WKC20−C10
−K60−E10−KZ100−Z10

PKC·QKC

Keyway on Step P (0 Point on the End Face)

PKC, QKC = 0.1 mm Increments
[ ! ] Keyway length ≤ 70
[NG] Not applicable when P ≤ 5

SH−SSFRQ30−300−F25−P10−T25−Q10−PKC20.0

PP·QQ

Keyway on Step P (Position Specified)

PP, PK = 0.1 mm Increments QQ, QK = 0.1 mm Increments
[ ! ] Keyway length ≤ 70
[NG] Not applicable when P ≤ 5

SH−SSFRQ30−300−F25−P10−T25−Q10−PP10−PK10

PV·QV

Multiple Keyways on Step P

PV, PW = 0.1 mm Increments QV, QW = 0.1 mm Increments
[ ! ] Keyway length ≤ 70
[NG] Not applicable when P ≤ 5
[ ! ] Can be specified only when combined with PP (QQ)

SH−SSFRQ30−300−F30−P10−T25−Q10−PP5−PK5−PV15−PW10

TL·TR

Retaining Ring Groove on Part D

TL, TR = 0.1 mm Increments
[ ! ]2 ≤ TL (TR) +F (T) ≤ 150　

SH−SSFRQ30−300−F25−P10−T25−Q10−TL5−TR5

TF·TT

Retaining Ring Groove on Step

TF, TT = 0.1 mm Increments
[ ! ]2 ≤ TF (TT) ≤ 150

SH−SSFRQ30−300−F25−P10−T25−Q10−TF5

Set screw flat at one location

FC, G = 1 mm Increments
[ ! ]G ≤ 70

SH−SSFRQ30−300−F25−P10−T25−Q10−FC10−G3

WFC

Set screw flats at two locations

WFC, J, W, V = 1 mm Increments
[ ! ]J·V ≤ 70

SH−SSFRQ30−300−F25−P10−T25−Q10−WFC10−J15−W10−V20

SFC

Set Screw Flat, 2 Set Screw Flats (Angle Specified)

SFC, SG = 1 mm Increments AG = 15° Increments
[ ! ]SG ≤ 70

SH−SSFRQ30−300−F25−P10−T25−Q10−SFC10−SG3−AG120

PFC·QFC

Set Screw Flat on Step

PFC, LC = 1 mm Increments QFC, RC = 1 mm Increments
[ ! ]LC·RC ≤ 70

SH−SSFRQ30−300−F25−P10−T25−Q10−PFC5−LC10

KWC

Set Screw Flat, 2 Set Screw Flats on Both Ends

KWC = 1 mm Increments
[ ! ]KWC ≤ F·T [ ! ]Y ≤ 680
[NG] Not applicable to P(Q) = 4 or less

SH−SSFRQ30−300−F25−P10−T25−Q10−KWC25

Set screw flat, chamfering depth configurable

WC = 0.1 mm Increments
[NG] D dim. 6, 13, 16, 17, 18 or 22 is not applicable
[ ! ] WC can be specified only when KWC is specified

D	WC
8·10·12	5 ≤ WC ≤ P (Q)-1
15·20	10 ≤ WC ≤ P (Q)-1
25 to 50	15 ≤ WC ≤ P (Q)-1

SH−SSFRQ30−300−F25−P20−T25−Q20−KWC25−WC18.0

Slit Cam Groove

UC = 1 mm Increments
[NG] D13 or more is not applicable

SH−SSFRQ10−300−F25−P8−T25−Q8−UC10

LKC

L Dimension Tolerance Change

L < 500···L±0.05 L ≥ 500···L±0.1
[NG] L800 or more is not applicable

SH−SSFRQ30−300−F25−P10−T25−Q10−LKC

Wrench Flats

SC = 1 mm Increments

SH−SSFRQ30−300−F25−P10−T25−Q10−SC10

CKC

Concentricity

Change the concentricity to 0.02.
[NG] Not applicable when D Tol. = h9
[ ! ] For Lmax, see the table on the right

D	Lmax
6 to 22	450
25 to 50	600

SH−SSFRQ30−300−F25−P10−T25−Q10−CKC

CP·CQ

Change of Step Chamfering

Change the size of step chamfering　
* Select CP/CQ from the table
[ ! ] Only values provided on the Applicable Dia. Table are applicable

Chamfering	Applicable Dia. (P·Q)
C2	⌀6 to ⌀49
C3	⌀8 to ⌀49
C4	⌀10 to ⌀49
C5	⌀12 to ⌀49

SH−SSFRQ30−300−F25−P10−T25−Q10−CP4

PM·QM

Tapped on Step

PM, QM = Select from M2, 2.6, 3, 4, 5, 6, 8, 10, 12, 24 or 30
[ ! ] (P-PM)/2 ≥ 0.5
[ ! ] (P (Q)-PM (QM))/2 ≥ 0.5

SH−SSFRQ30−300−F25−P10−T25−Q10−PM5−QM5

[!] When combined with other alterations, ± 2 degree phase differential may occur. Provide 2 mm or more clearance between this alteration and others.
[ ! ] When multiple keyways or set screw flats are specified, they are added in the same plane. When the distance of the alterations are over 500 mm, ± 2 degree phase difference may occur.

Keyway Dimensions

Shaft Dia.	b		t		r
Shaft Dia.	Reference Dimension	Tolerance (N9)	Reference Dimension	Tolerance	r
6 to 7	2	-0.004 -0.029	1.2	+0.1 0	0.08 to 0.16
8 to 10	3	-0.004 -0.029	1.8
11 to 12	4	0 -0.03	2.5
13 to 17	5		3.0		0.16 to 0.25
18 to 22	6		3.5
23 to 30	8	0 -0.036	4.0	+0.2 0
31 to 38	10	0 -0.036	5.0		0.25 to 0.4
39 to 44	12	0 -0.043	5.0
45 to 50	14	0 -0.043	5.5

[ ! ] b ≤ A, E, C ≤ 100
[ ! ] If 3 keyways are required, use both KC and WKC.
[!] If 4 keyways are required, use KC, WKC, and KZ. (KZ is applicable only when combined with both KC and WKC)
[NG] Not applicable to D = 2 to 5.
[ ! ] The example below shows the keyway shape for the specs KC, WKC, K = 0, KC + A ≥ L and WKC + C + K + E > L.

[ ! ] Although keyway(s) and set screw flats are added in the same plane, ±2 degree phase differential may occur.
[ ! ] When the keyway position is less than 1 mm away from the end face, R is not applied.

Detailed Retaining Ring Groove Dimensions for Rotary Shafts

Shaft Dia.	d Tolerance		Slot Width (m) Tolerance		Applicable Retaining Ring
2	1.2	+0.06 0	0.4	+0.05 0	JIS E Type 1.2
2.5	1.5		0.5		JIS E Type 1.5
3	2		0.5		JIS E Type 2
4	3		0.7	+0.1 0	JIS E Type 3
5	4	+0.075 0			JIS E Type 4
6	5				JIS E Type 5
7	6		0.9		JIS E Type 6
8	7	+0.09 0			JIS E Type 7
9	8	+0.09 0			JIS E Type 8
10	9.6	0/－0.09	1.15	+0.14 0	JIS C Type 10
11	10.5	0 -0.11			JIS C Type 11
12	11.5				JIS C Type 12
13	12.4				JIS C Type 13
14	13.4				JIS C Type 14
15	14.3				JIS C Type 15
16	15.2				JIS C Type 16
17	16.2				JIS C Type 17
18	17		1.35		JIS C Type 18
19	18		1.35		JIS C Type 19

Shaft Dia.	d Tolerance		Slot Width (m) Tolerance		Applicable Retaining Ring
20	19	0 -0.21	1.35	+0.14 0	JIS C Type 20
21	20				JIS C Type 21
22	21				JIS C Type 22
23	22				JIS C Type 23
24	22.9				JIS C Type 24
25	23.9				JIS C Type 25
26	24.9				JIS C Type 26
28	26.6		1.65		JIS C Type 28
29	27.6				JIS C Type 29
30	28.6				JIS C Type 30
32	30.3	0 -0.25			JIS C Type 32
35	33				JIS C Type 35
40	38		1.9		JIS C Type 40
45	42.5		1.9		JIS C Type 45
50	47		2.2		JIS C Type 50

[ ! ]2 ≤ TL (TR) +F (T) ≤ 150, 2 ≤ TF (TT) ≤ 150
[ ! ] An applicable retaining ring is included in the retaining ring groove.

Cleaning Process
·Degreasing (Part Number: SL-□□)

Working Environment: General environment
Alkaline warm pure water		Ultrasonic pure water cleaning after cleaning with pure water *3 times		Dry		Anti-rust single packing

·Precision cleaning (Part Number: SH-□□)

				Working Environment: Class 1,000				Working Environment: Class 10
Hydrocarbon cleaning Ro water cleaning		After high-pressure water jet cleaning (Ro water) Wash with pure water (10 MΩ·cm)		Use pure water (13 MΩ·cm)		Use nitrogen blow		Conducted on a clean bench in a Class 10 clean environment

·Electrolytic polishing + precision cleaning (Part Number: SHD-□□)

						Working Environment: Class 1,000				Working Environment: Class 10
Hydrocarbon cleaning Ro water cleaning		Electrolytic polishing with an electrolytic polishing layer according to the material		After high-pressure water jet cleaning (Ro water) Wash with pure water (10 MΩ·cm)		Use warm pure water (13 MΩ·cm)		Use nitrogen blow		Conducted on a clean bench in a Class 10 clean environment

Packaging Example

For degreasing:
(Part Number: SL-□□)

For precision cleaning or electrolytic polishing + precision cleaning:
(Part Number: SH-□□/SHD-□□)

[ ! ] Both the first and second layer packaging are degassed.

Cleaning Effectiveness / Recommended Environment for Use

Cleaning Method	Product Part Number	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Use Case and Process
Degreasing	SL-□□	Anti-rust packing	Oil removal	General environment	Regular assembly process
Degreasing	SL-□□	Anti-rust packing	Oil removal	General environment	Post battery assembly process
Precision cleaning	SH-□□	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
					LCD-related post assembly process
					In-vehicle camera assembly process
Electrolytic polishing + precision cleaning	SHD-□□	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
					Liquid crystal deposition process
					Pre-OLED process

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 45; 60

Part Number
SH-SSFRHQ6-[15-496/0.1]-F[2-25/0.1]-P[3-5/1]-T[2-25/0.1]-Q[3-5/1]
SH-SSFRHQ8-[15-496/0.1]-F[2-35/0.1]-P[3-7/1]-T[2-35/0.1]-Q[3-7/1]
SH-SSFRHQ10-[15-796/0.1]-F[2-45/0.1]-P[3-9/1]-T[2-45/0.1]-Q[3-9/1]
SH-SSFRHQ12-[15-800/0.1]-F[2-55/0.1]-P[3-11/1]-T[2-55/0.1]-Q[3-11/1]
SH-SSFRHQ15-[15-800/0.1]-F[2-70/0.1]-P[4-14/1]-T[2-70/0.1]-Q[4-14/1]
SH-SSFRHQ17-[24-800/0.1]-F[2-80/0.1]-P[5-16/1]-T[2-80/0.1]-Q[5-16/1]
SH-SSFRHQ20-[24-800/0.1]-F[2-95/0.1]-P[5-19/1]-T[2-95/0.1]-Q[5-19/1]
SH-SSFRHQ25-[24-800/0.1]-F[2-120/0.1]-P[8-24/1]-T[2-120/0.1]-Q[8-24/1]
SH-SSFRHQ30-[24-800/0.1]-F[2-145/0.1]-P[8-29/1]-T[2-145/0.1]-Q[8-29/1]
SH-SSFRHQ35-[40-800/0.1]-F[2-170/0.1]-P[16-34/1]-T[2-170/0.1]-Q[16-34/1]
SH-SSFRHQ40-[40-800/0.1]-F[2-195/0.1]-P[16-39/1]-T[2-195/0.1]-Q[16-39/1]
SH-SSFRHQ50-[40-800/0.1]-F[2-245/0.1]-P[16-49/1]-T[2-245/0.1]-Q[16-49/1]
SH-SSFRMGQ8-[15-496/0.1]-F[2-35/0.1]-P[3-7/1]-T[2-35/0.1]-Q[3-7/1]
SH-SSFRMGQ10-[15-796/0.1]-F[2-45/0.1]-P[3-9/1]-T[2-45/0.1]-Q[3-9/1]
SH-SSFRMGQ12-[15-800/0.1]-F[2-55/0.1]-P[3-11/1]-T[2-55/0.1]-Q[3-11/1]
SH-SSFRMGQ15-[15-800/0.1]-F[2-70/0.1]-P[4-14/1]-T[2-70/0.1]-Q[4-14/1]
SH-SSFRMGQ20-[24-800/0.1]-F[2-95/0.1]-P[5-19/1]-T[2-95/0.1]-Q[5-19/1]
SH-SSFRMGQ25-[24-800/0.1]-F[2-120/0.1]-P[8-24/1]-T[2-120/0.1]-Q[8-24/1]
SH-SSFRMGQ30-[24-800/0.1]-F[2-145/0.1]-P[8-29/1]-T[2-145/0.1]-Q[8-29/1]
SH-SSFRMGQ35-[40-800/0.1]-F[2-170/0.1]-P[16-34/1]-T[2-170/0.1]-Q[16-34/1]
SH-SSFRMHQ8-[15-496/0.1]-F[2-35/0.1]-P[3-7/1]-T[2-35/0.1]-Q[3-7/1]
SH-SSFRMHQ10-[15-796/0.1]-F[2-45/0.1]-P[3-9/1]-T[2-45/0.1]-Q[3-9/1]
SH-SSFRMHQ12-[15-800/0.1]-F[2-55/0.1]-P[3-11/1]-T[2-55/0.1]-Q[3-11/1]
SH-SSFRMHQ15-[15-800/0.1]-F[2-70/0.1]-P[4-14/1]-T[2-70/0.1]-Q[4-14/1]
SH-SSFRMHQ20-[24-800/0.1]-F[2-95/0.1]-P[5-19/1]-T[2-95/0.1]-Q[5-19/1]
SH-SSFRMHQ25-[24-800/0.1]-F[2-120/0.1]-P[8-24/1]-T[2-120/0.1]-Q[8-24/1]
SH-SSFRMHQ30-[24-800/0.1]-F[2-145/0.1]-P[8-29/1]-T[2-145/0.1]-Q[8-29/1]
SH-SSFRMHQ35-[40-800/0.1]-F[2-170/0.1]-P[16-34/1]-T[2-170/0.1]-Q[16-34/1]
SH-SSFRQ6-[15-496/0.1]-F[2-25/0.1]-P[3-5/1]-T[2-25/0.1]-Q[3-5/1]
SH-SSFRQ8-[15-496/0.1]-F[2-35/0.1]-P[3-7/1]-T[2-35/0.1]-Q[3-7/1]
SH-SSFRQ10-[15-796/0.1]-F[2-45/0.1]-P[3-9/1]-T[2-45/0.1]-Q[3-9/1]
SH-SSFRQ12-[15-800/0.1]-F[2-55/0.1]-P[3-11/1]-T[2-55/0.1]-Q[3-11/1]
SH-SSFRQ13-[15-800/0.1]-F[2-60/0.1]-P[4-12/1]-T[2-60/0.1]-Q[4-12/1]
SH-SSFRQ15-[15-800/0.1]-F[2-70/0.1]-P[4-14/1]-T[2-70/0.1]-Q[4-14/1]
SH-SSFRQ16-[15-800/0.1]-F[2-75/0.1]-P[4-15/1]-T[2-75/0.1]-Q[4-15/1]
SH-SSFRQ17-[24-800/0.1]-F[2-80/0.1]-P[5-16/1]-T[2-80/0.1]-Q[5-16/1]
SH-SSFRQ18-[24-800/0.1]-F[2-85/0.1]-P[5-17/1]-T[2-85/0.1]-Q[5-17/1]
SH-SSFRQ20-[24-800/0.1]-F[2-95/0.1]-P[5-19/1]-T[2-95/0.1]-Q[5-19/1]
SH-SSFRQ22-[24-800/0.1]-F[2-105/0.1]-P[6-21/1]-T[2-105/0.1]-Q[6-21/1]
SH-SSFRQ25-[24-800/0.1]-F[2-120/0.1]-P[8-24/1]-T[2-120/0.1]-Q[8-24/1]
SH-SSFRQ30-[24-800/0.1]-F[2-145/0.1]-P[8-29/1]-T[2-145/0.1]-Q[8-29/1]
SH-SSFRQ35-[40-800/0.1]-F[2-170/0.1]-P[16-34/1]-T[2-170/0.1]-Q[16-34/1]
SH-SSFRQ40-[40-800/0.1]-F[2-195/0.1]-P[16-39/1]-T[2-195/0.1]-Q[16-39/1]
SH-SSFRQ50-[40-800/0.1]-F[2-245/0.1]-P[16-49/1]-T[2-245/0.1]-Q[16-49/1]

Price	Minimum Order Qty.	Days to Ship	Environmentally friendly	Shaft Dia. D (mm)	D Tolerance	Length L (mm)	Cleaning Method	Wrench Flatted	F (㎜)	P (㎜)	Q (㎜)	T (㎜)
-	1 Piece(s)	11 Day(s) or more	RoHS Compliant (10 Substances)	6	h7 (Ground)	15 ～ 496	Precision Cleaning	Wrench flats option (alteration)	2 ～ 25	3 ～ 5	3 ～ 5	2 ～ 25
-	1 Piece(s)	11 Day(s) or more	RoHS Compliant (10 Substances)	8	h7 (Ground)	15 ～ 496	Precision Cleaning	Wrench flats option (alteration)	2 ～ 35	3 ～ 7	3 ～ 7	2 ～ 35
-	1 Piece(s)	11 Day(s) or more	RoHS Compliant (10 Substances)	10	h7 (Ground)	15 ～ 796	Precision Cleaning	Wrench flats option (alteration)	2 ～ 45	3 ～ 9	3 ～ 9	2 ～ 45
-	1 Piece(s)	11 Day(s) or more	RoHS Compliant (10 Substances)	12	h7 (Ground)	15 ～ 800	Precision Cleaning	Wrench flats option (alteration)	2 ～ 55	3 ～ 11	3 ～ 11	2 ～ 55
-	1 Piece(s)	11 Day(s) or more	RoHS Compliant (10 Substances)	15	h7 (Ground)	15 ～ 800	Precision Cleaning	Wrench flats option (alteration)	2 ～ 70	4 ～ 14	4 ～ 14	2 ～ 70
-	1 Piece(s)	11 Day(s) or more	RoHS Compliant (10 Substances)	17	h7 (Ground)	24 ～ 800	Precision Cleaning	Wrench flats option (alteration)	2 ～ 80	5 ～ 16	5 ～ 16	2 ～ 80
-	1 Piece(s)	11 Day(s) or more	RoHS Compliant (10 Substances)	20	h7 (Ground)	24 ～ 800	Precision Cleaning	Wrench flats option (alteration)	2 ～ 95	5 ～ 19	5 ～ 19	2 ～ 95
-	1 Piece(s)	11 Day(s) or more	RoHS Compliant (10 Substances)	25	h7 (Ground)	24 ～ 800	Precision Cleaning	Wrench flats option (alteration)	2 ～ 120	8 ～ 24	8 ～ 24	2 ～ 120
-	1 Piece(s)	11 Day(s) or more	RoHS Compliant (10 Substances)	30	h7 (Ground)	24 ～ 800	Precision Cleaning	Wrench flats option (alteration)	2 ～ 145	8 ～ 29	8 ～ 29	2 ～ 145
-	1 Piece(s)	11 Day(s) or more	RoHS Compliant (10 Substances)	35	h7 (Ground)	40 ～ 800	Precision Cleaning	Wrench flats option (alteration)	2 ～ 170	16 ～ 34	16 ～ 34	2 ～ 170
-	1 Piece(s)	11 Day(s) or more	RoHS Compliant (10 Substances)	40	h7 (Ground)	40 ～ 800	Precision Cleaning	Wrench flats option (alteration)	2 ～ 195	16 ～ 39	16 ～ 39	2 ～ 195
-	1 Piece(s)	11 Day(s) or more	RoHS Compliant (10 Substances)	50	h7 (Ground)	40 ～ 800	Precision Cleaning	Wrench flats option (alteration)	2 ～ 245	16 ～ 49	16 ～ 49	2 ～ 245
-	1 Piece(s)	11 Day(s) or more	RoHS Compliant (10 Substances)	8	h9 (Cold-drawn)	15 ～ 496	Precision Cleaning	Wrench flats option (alteration)	2 ～ 35	3 ～ 7	3 ～ 7	2 ～ 35
-	1 Piece(s)	11 Day(s) or more	RoHS Compliant (10 Substances)	10	h9 (Cold-drawn)	15 ～ 796	Precision Cleaning	Wrench flats option (alteration)	2 ～ 45	3 ～ 9	3 ～ 9	2 ～ 45
-	1 Piece(s)	11 Day(s) or more	RoHS Compliant (10 Substances)	12	h9 (Cold-drawn)	15 ～ 800	Precision Cleaning	Wrench flats option (alteration)	2 ～ 55	3 ～ 11	3 ～ 11	2 ～ 55
-	1 Piece(s)	11 Day(s) or more	RoHS Compliant (10 Substances)	15	h9 (Cold-drawn)	15 ～ 800	Precision Cleaning	Wrench flats option (alteration)	2 ～ 70	4 ～ 14	4 ～ 14	2 ～ 70
-	1 Piece(s)	11 Day(s) or more	RoHS Compliant (10 Substances)	20	h9 (Cold-drawn)	24 ～ 800	Precision Cleaning	Wrench flats option (alteration)	2 ～ 95	5 ～ 19	5 ～ 19	2 ～ 95
-	1 Piece(s)	11 Day(s) or more	RoHS Compliant (10 Substances)	25	h9 (Cold-drawn)	24 ～ 800	Precision Cleaning	Wrench flats option (alteration)	2 ～ 120	8 ～ 24	8 ～ 24	2 ～ 120
-	1 Piece(s)	11 Day(s) or more	RoHS Compliant (10 Substances)	30	h9 (Cold-drawn)	24 ～ 800	Precision Cleaning	Wrench flats option (alteration)	2 ～ 145	8 ～ 29	8 ～ 29	2 ～ 145
-	1 Piece(s)	11 Day(s) or more	RoHS Compliant (10 Substances)	35	h9 (Cold-drawn)	40 ～ 800	Precision Cleaning	Wrench flats option (alteration)	2 ～ 170	16 ～ 34	16 ～ 34	2 ～ 170
-	1 Piece(s)	11 Day(s) or more	RoHS Compliant (10 Substances)	8	h9 (Cold-drawn)	15 ～ 496	Precision Cleaning	Wrench flats option (alteration)	2 ～ 35	3 ～ 7	3 ～ 7	2 ～ 35
-	1 Piece(s)	11 Day(s) or more	RoHS Compliant (10 Substances)	10	h9 (Cold-drawn)	15 ～ 796	Precision Cleaning	Wrench flats option (alteration)	2 ～ 45	3 ～ 9	3 ～ 9	2 ～ 45
-	1 Piece(s)	11 Day(s) or more	RoHS Compliant (10 Substances)	12	h9 (Cold-drawn)	15 ～ 800	Precision Cleaning	Wrench flats option (alteration)	2 ～ 55	3 ～ 11	3 ～ 11	2 ～ 55
-	1 Piece(s)	11 Day(s) or more	RoHS Compliant (10 Substances)	15	h9 (Cold-drawn)	15 ～ 800	Precision Cleaning	Wrench flats option (alteration)	2 ～ 70	4 ～ 14	4 ～ 14	2 ～ 70
-	1 Piece(s)	11 Day(s) or more	RoHS Compliant (10 Substances)	20	h9 (Cold-drawn)	24 ～ 800	Precision Cleaning	Wrench flats option (alteration)	2 ～ 95	5 ～ 19	5 ～ 19	2 ～ 95
-	1 Piece(s)	11 Day(s) or more	RoHS Compliant (10 Substances)	25	h9 (Cold-drawn)	24 ～ 800	Precision Cleaning	Wrench flats option (alteration)	2 ～ 120	8 ～ 24	8 ～ 24	2 ～ 120
-	1 Piece(s)	11 Day(s) or more	RoHS Compliant (10 Substances)	30	h9 (Cold-drawn)	24 ～ 800	Precision Cleaning	Wrench flats option (alteration)	2 ～ 145	8 ～ 29	8 ～ 29	2 ～ 145
-	1 Piece(s)	11 Day(s) or more	RoHS Compliant (10 Substances)	35	h9 (Cold-drawn)	40 ～ 800	Precision Cleaning	Wrench flats option (alteration)	2 ～ 170	16 ～ 34	16 ～ 34	2 ～ 170
-	1 Piece(s)	11 Day(s) or more	RoHS Compliant (10 Substances)	6	g6 (Ground)	15 ～ 496	Precision Cleaning	-	2 ～ 25	3 ～ 5	3 ～ 5	2 ～ 25
-	1 Piece(s)	11 Day(s) or more	RoHS Compliant (10 Substances)	8	g6 (Ground)	15 ～ 496	Precision Cleaning	-	2 ～ 35	3 ～ 7	3 ～ 7	2 ～ 35
-	1 Piece(s)	11 Day(s) or more	RoHS Compliant (10 Substances)	10	g6 (Ground)	15 ～ 796	Precision Cleaning	-	2 ～ 45	3 ～ 9	3 ～ 9	2 ～ 45
-	1 Piece(s)	11 Day(s) or more	RoHS Compliant (10 Substances)	12	g6 (Ground)	15 ～ 800	Precision Cleaning	-	2 ～ 55	3 ～ 11	3 ～ 11	2 ～ 55
-	1 Piece(s)	11 Day(s) or more	RoHS Compliant (10 Substances)	13	g6 (Ground)	15 ～ 800	Precision Cleaning	-	2 ～ 60	4 ～ 12	4 ～ 12	2 ～ 60
-	1 Piece(s)	11 Day(s) or more	RoHS Compliant (10 Substances)	15	g6 (Ground)	15 ～ 800	Precision Cleaning	-	2 ～ 70	4 ～ 14	4 ～ 14	2 ～ 70
-	1 Piece(s)	11 Day(s) or more	RoHS Compliant (10 Substances)	16	g6 (Ground)	15 ～ 800	Precision Cleaning	-	2 ～ 75	4 ～ 15	4 ～ 15	2 ～ 75
-	1 Piece(s)	11 Day(s) or more	RoHS Compliant (10 Substances)	17	g6 (Ground)	24 ～ 800	Precision Cleaning	-	2 ～ 80	5 ～ 16	5 ～ 16	2 ～ 80
-	1 Piece(s)	11 Day(s) or more	RoHS Compliant (10 Substances)	18	g6 (Ground)	24 ～ 800	Precision Cleaning	-	2 ～ 85	5 ～ 17	5 ～ 17	2 ～ 85
-	1 Piece(s)	11 Day(s) or more	RoHS Compliant (10 Substances)	20	g6 (Ground)	24 ～ 800	Precision Cleaning	-	2 ～ 95	5 ～ 19	5 ～ 19	2 ～ 95
-	1 Piece(s)	11 Day(s) or more	RoHS Compliant (10 Substances)	22	g6 (Ground)	24 ～ 800	Precision Cleaning	-	2 ～ 105	6 ～ 21	6 ～ 21	2 ～ 105
-	1 Piece(s)	11 Day(s) or more	RoHS Compliant (10 Substances)	25	g6 (Ground)	24 ～ 800	Precision Cleaning	-	2 ～ 120	8 ～ 24	8 ～ 24	2 ～ 120
-	1 Piece(s)	11 Day(s) or more	RoHS Compliant (10 Substances)	30	g6 (Ground)	24 ～ 800	Precision Cleaning	-	2 ～ 145	8 ～ 29	8 ～ 29	2 ～ 145
-	1 Piece(s)	11 Day(s) or more	RoHS Compliant (10 Substances)	35	g6 (Ground)	40 ～ 800	Precision Cleaning	-	2 ～ 170	16 ～ 34	16 ～ 34	2 ～ 170
-	1 Piece(s)	11 Day(s) or more	RoHS Compliant (10 Substances)	40	g6 (Ground)	40 ～ 800	Precision Cleaning	-	2 ～ 195	16 ～ 39	16 ～ 39	2 ～ 195
-	1 Piece(s)	11 Day(s) or more	RoHS Compliant (10 Substances)	50	g6 (Ground)	40 ～ 800	Precision Cleaning	-	2 ～ 245	16 ～ 49	16 ～ 49	2 ～ 245

Basic Information

End Shape (Left)	Unfinished	Characteristics/Applications	Clean Washed	Basic Shape_02	Both Ends Stepped
End Shape (Right)	Straight	Material_02	SUS304	Hardness	Unhardened
Material Details	SUS304	Keyway	Keyway Option (Alteration)	Surface Treatment_02	Not Provided
Material Certificate	Available

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Search by Category / Brand

Search by Category

How can we improve?

Configure

Specification/Dimensions

Environmentally friendly

Shaft Dia. D(mm)

D Tolerance

Length L(mm)

Wrench Flatted

F(㎜)

P(㎜)

Q(㎜)

T(㎜)

type

Cleaning Method

CAD

Days to Ship

Specify Alterations

[Clean & Pack] Rotary Shaft - Both Ends Stepped

(i)
Caution

Product Description

Specification Table

Alterations

Part Number

Basic Information

Payment Method

Customer Service

My Account

About MISUMI

Related Sites

Social Media

MISUMI India Contact

Customer Service

日本語でのお問い合わせはジャパンデスクまで

Search by Category / Brand

Search by Category

How can we improve?

Configure

Specification/Dimensions

Environmentally friendly

Shaft Dia. D(mm)

D Tolerance

Length L(mm)

Wrench Flatted

F(㎜)

P(㎜)

Q(㎜)

T(㎜)

type

Cleaning Method

CAD

Days to Ship

Specify Alterations

[Clean & Pack] Rotary Shaft - Both Ends Stepped

Copy Part Number URL to Clipboard

(i) Caution

Product Description

Specification Table

Alterations

Part Number

Basic Information

Payment Method

Customer Service

My Account

About MISUMI

Related Sites

Social Media

MISUMI India Contact

Customer Service

日本語でのお問い合わせはジャパンデスクまで

(i)
Caution