(!)NOTE : Windows 7 users won’t be able to use some latest features of eCatalog/WOS since Microsoft is ending support for Windows 7 on 14 Jan, 2020. Please upgrade your system for uninterrupted services.
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
Product DetailSpecification/Dimensions
-
Table Dimensions
- 25
- 40
- 60
- 80
- 100
-
Alteration
- A
- AR
- AZ
- AZR
- CR
- CZ
- CZR
- H
- MN
- P
- Standard Type
-
type
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 11 Day(s) or Less
- 13 Day(s) or Less
- 16 Day(s) or Less
Specify Alterations
X-Axis Manual Stages, Linear Ball Guide (Part Number)
Click this image to zoom it.
Move the mouse over or click the image to zoom
Copy Part Number URL to Clipboard
The part number URL has been copied into your clipboard.
-
- Starting From :
- 9,027₹/Unit
-
- Order Qty :
-
-
- Total Price :
- ---
-
- Days to ship :
- ---
Select part number to Order Now/ Add to Cart
Similar Products
Product DetailDimensional Drawing of Manual X-Axis Stages
*A25, A40, A60, A80, A100 are available sizes of the screw hole on sliding table
Specification Table of Manual X-Axis Stages
| Part Number of Manual X-Axis Stages | Manual X-Axis Stages (mm) | Movement (mm) | Load Capacity (N) | Straightness | Minimum Reading (μm) | Weight (kg) | |
| Type of Manual X-Axis Stages | No. | Horizontal | |||||
| E-XSG | 25 | 25×25 | ±3.25 | 39.2 | Within 10 | 10 | 0.07 |
| 40 | 40×40 | ±6.5 | 98 | 0.23 | |||
| 60 | 60×60 | 196 | 0.4 | ||||
| 80 | 80×80 | ±12.5 | 264.6 | 0.9 | |||
| 100 | 100×100 | 343 | 1.33 | ||||
■Alteration of Manual X-Axis Stages
| Alterations of Manual X-Axis Stages | Changing the position of the micrometer knob | ||||
| Manual X-Axis Stages Spec. | Manual X-Axis Stages Center | Center Left and Right Reverse | Center Up and Down Reverse | Center Left and Right/Up and Down Reverse | Side Left and Right Reverse |
| Manual X-Axis Stages Code | A | AR | AZ | AZR | CR |
| Alterations of Manual X-Axis Stages | Changing the position of the micrometer knob | ||||
| Manual X-Axis Stages Spec. | Side Up and Down Reverse | Left and Right/Up and Down Reverse | Disc Clamping | Opposite Clamping | Without Micrometer Knob |
| Manual X-Axis Stages Code | CZ | CZR | H | P | MN |
Caution of Manual X-Axis Stages
Usage environment of X-Axis Stages: 10~50℃, 20~70%RH (non-condensing)
Recommended usage environment of X-Axis Stages: 22±5℃, 20~70%RH (non-condensing)
■ Guide mechanism of X-Axis Stages
Since a cross roller guide is used as the guide mechanism, inject lubricant in a timely manner according to the usage conditions to prevent the life of the cross roller guide from being reduced and deteriorated due to lubricant reduction.
■ Clamping mechanism of X-Axis Stages
①The clamping mechanism of the slide table is fixed by the frictional force generated by the fastening screw, so if the external force exceeds the frictional force of the clamping mechanism, the slide table will move. The user must take appropriate measures during use to prevent the table surface from moving.
②Holding force refers to the value of the force that prevents the slide table from moving in the clamped state. The maximum holding force varies depending on the tightening torque, so ensure sufficient safety factors when designing.
■ A slide table with a micrometer knob mounted on the transport mechanism is generally called a standard type if it has a shape like the figure below. You can freely select by combining the installation space, installation posture, and operation method. However, there are some models where the installation position of the micrometer knob cannot be changed due to the product structure.
■ There may be cases where the upper and lower tables are deformed due to differences in the flatness of the installation surface. Deformation of the table surface causes backlash, loosening due to failure to obtain the specified preload, and poor sliding due to excessive preload. Therefore, it is recommended to maintain the flatness of the installation surface at approximately 5 microns.
Part Number
- Incomplete part number.
Please use left hand selections to complete a part number.
| Part Number | Price | Minimum Order Qty. | Volume Discount | Days to Ship | RoHS | Table Dimensions | Alteration |
|---|---|---|---|---|---|---|---|
₹ 9,959.00 | 1 Piece(s) | 11 Day(s) | 10 | 25 | Standard Type | ||
₹ 9,959.00 | 1 Piece(s) | 13 Day(s) | 10 | 25 | A | ||
₹ 9,959.00 | 1 Piece(s) | 13 Day(s) | 10 | 25 | AR | ||
₹ 9,959.00 | 1 Piece(s) | 13 Day(s) | 10 | 25 | AZ | ||
₹ 9,959.00 | 1 Piece(s) | 13 Day(s) | 10 | 25 | AZR | ||
₹ 9,959.00 | 1 Piece(s) | 13 Day(s) | 10 | 25 | CR | ||
₹ 9,959.00 | 1 Piece(s) | 13 Day(s) | 10 | 25 | CZ | ||
₹ 9,959.00 | 1 Piece(s) | 13 Day(s) | 10 | 25 | CZR | ||
₹ 9,959.00 | 1 Piece(s) | 13 Day(s) | 10 | 25 | H | ||
₹ 9,027.00 | 1 Piece(s) | 16 Day(s) | 10 | 25 | MN | ||
₹ 9,959.00 | 1 Piece(s) | 16 Day(s) | 10 | 25 | P | ||
₹ 9,963.00 | 1 Piece(s) | 11 Day(s) | 10 | 40 | Standard Type | ||
₹ 9,963.00 | 1 Piece(s) | 16 Day(s) | 10 | 40 | A | ||
₹ 9,963.00 | 1 Piece(s) | 16 Day(s) | 10 | 40 | AR | ||
₹ 9,963.00 | 1 Piece(s) | 16 Day(s) | 10 | 40 | AZ | ||
₹ 9,963.00 | 1 Piece(s) | 16 Day(s) | 10 | 40 | AZR | ||
₹ 9,963.00 | 1 Piece(s) | 16 Day(s) | 10 | 40 | CR | ||
₹ 9,963.00 | 1 Piece(s) | 16 Day(s) | 10 | 40 | CZ | ||
₹ 9,963.00 | 1 Piece(s) | 16 Day(s) | 10 | 40 | CZR | ||
₹ 9,963.00 | 1 Piece(s) | 16 Day(s) | 10 | 40 | H | ||
₹ 9,031.00 | 1 Piece(s) | 16 Day(s) | 10 | 40 | MN | ||
₹ 9,963.00 | 1 Piece(s) | 16 Day(s) | 10 | 40 | P | ||
₹ 10,900.00 | 1 Piece(s) | 11 Day(s) | 10 | 60 | Standard Type | ||
₹ 10,900.00 | 1 Piece(s) | 16 Day(s) | 10 | 60 | A | ||
₹ 10,900.00 | 1 Piece(s) | 16 Day(s) | 10 | 60 | AR | ||
₹ 10,900.00 | 1 Piece(s) | 16 Day(s) | 10 | 60 | AZ | ||
₹ 10,900.00 | 1 Piece(s) | 16 Day(s) | 10 | 60 | AZR | ||
₹ 10,900.00 | 1 Piece(s) | 16 Day(s) | 10 | 60 | CR | ||
₹ 10,900.00 | 1 Piece(s) | 16 Day(s) | 10 | 60 | CZ | ||
₹ 10,900.00 | 1 Piece(s) | 16 Day(s) | 10 | 60 | CZR | ||
₹ 10,900.00 | 1 Piece(s) | 16 Day(s) | 10 | 60 | H | ||
₹ 9,967.00 | 1 Piece(s) | 16 Day(s) | 10 | 60 | MN | ||
₹ 10,900.00 | 1 Piece(s) | 16 Day(s) | 10 | 60 | P | ||
₹ 14,020.00 | 1 Piece(s) | 11 Day(s) | 10 | 80 | Standard Type | ||
₹ 14,020.00 | 1 Piece(s) | 16 Day(s) | 10 | 80 | A | ||
₹ 14,020.00 | 1 Piece(s) | 16 Day(s) | 10 | 80 | AR | ||
₹ 14,020.00 | 1 Piece(s) | 16 Day(s) | 10 | 80 | AZ | ||
₹ 14,020.00 | 1 Piece(s) | 16 Day(s) | 10 | 80 | AZR | ||
₹ 14,020.00 | 1 Piece(s) | 16 Day(s) | 10 | 80 | CR | ||
₹ 14,020.00 | 1 Piece(s) | 16 Day(s) | 10 | 80 | CZ | ||
₹ 14,020.00 | 1 Piece(s) | 16 Day(s) | 10 | 80 | CZR | ||
₹ 14,020.00 | 1 Piece(s) | 16 Day(s) | 10 | 80 | H | ||
₹ 13,088.00 | 1 Piece(s) | 16 Day(s) | 10 | 80 | MN | ||
₹ 14,020.00 | 1 Piece(s) | 16 Day(s) | 10 | 80 | P | ||
₹ 14,777.00 | 1 Piece(s) | 16 Day(s) | 10 | 100 | Standard Type | ||
₹ 14,777.00 | 1 Piece(s) | 16 Day(s) | 10 | 100 | A | ||
₹ 14,777.00 | 1 Piece(s) | 16 Day(s) | 10 | 100 | AR | ||
₹ 14,777.00 | 1 Piece(s) | 16 Day(s) | 10 | 100 | AZ | ||
₹ 14,777.00 | 1 Piece(s) | 16 Day(s) | 10 | 100 | AZR | ||
₹ 14,777.00 | 1 Piece(s) | 16 Day(s) | 10 | 100 | CR | ||
₹ 14,777.00 | 1 Piece(s) | 16 Day(s) | 10 | 100 | CZ | ||
₹ 14,777.00 | 1 Piece(s) | 16 Day(s) | 10 | 100 | CZR | ||
₹ 14,777.00 | 1 Piece(s) | 16 Day(s) | 10 | 100 | H | ||
₹ 13,844.00 | 1 Piece(s) | 16 Day(s) | 10 | 100 | MN | ||
₹ 14,777.00 | 1 Piece(s) | 16 Day(s) | 10 | 100 | P |
Loading...
Feature 2: Low price is achieved by simplifying the structure and improving the machining process.
Feature 3: A wide range of alterations are available to enable installation and operation under different conditions.
Feature 4: By improving the clamping mechanism, the holding force of the positioning stage is greater than that of the standard type clamping mechanism.
| Type |  Material |  Surface Treatment | Movement (mm) | Load Capacity (N) | Straightness |
| E-XSG | D2 Tool Steel | Chemically Nickel Plating | ±3.2～±12.5 | 39.2~343 | Within 10 μm |
■Amount of travel
The catalog drawing size is the state of travel 0mm, and taking this as reference, the distance moved in the left and right directions is the amount of travel.
■Load capacity
is the force in N that the positioning stage can withstand when the center of gravity of the workpiece is in the center of the positioning stage. If used in excess of the load capacity, the positioning stage may not move properly or get stuck. Refer to the values of "Horizontal" and "Vertical" for the load resistance for horizontal and vertical installation respectively. Note that when the linear motion positioning stage is installed vertically or upside down, the accuracy may be less than the value indicated in the catalog.
■Straightness
The maximum offset relative to the ideal axis of movement (the line connecting the start and end points is shown as the red line in the figure below. The black line is the actual trajectory of movement.) when the positioning stage moves at full stroke. Detection method: Place the micrometer on the positioning stage, with the pointer held against the reference block, let the positioning stage move at full stroke, and measure its maximum displacement, which is the straightness.
Usage Method
When mounting the positioning stage to the base, basically it is mounted by moving the positioning stage surface. Refer to the following diagram.
The above diagram is for demonstration purpose only. Refer to each catalog or 3D data for detailed shapes and specifications of the positioning stage.■Mounting Posture
| Diagram |  |  |  |  |
| Mounting Posture | Horizontal | Inverted | Side-Mounted Horizontal | Side-Mounted Vertical |
| Load Resistance Characteristics | ○ | ○ | △ | △ |
Horizontal, inverted, side-mounted horizontal or side-mounted vertical installation options are available. Other installation methods should be given more attention.Load capacity and accuracy will change greatly depending on the mounting posture.○：Same as horizontal load capacity.△：About 1/3 of the horizontal load capacity is the approximate standard, if the catalog contains the vertical load capacity, it should be given priority.■Vertical Use of X-Axis Positioning Stage
When using the X-axis positioning stage vertically, pay attention to the feed direction, which should not be in the same direction as gravity.
When using a micrometer knob type positioning stage, note that the positioning stage is reset by extension spring. If the force applied is greater than the spring load, the positioning stage surface may fall. For such occasions, alterations can be used as a solution.
| Wrong Usage Method | Correct Usage Method |
| (Usually) If the force applied exceeds the tensile load of the spring, the positioning stage surface may slip off because it cannot support the weight. | After selecting the alteration of the micrometer knob position change, the positioning stage surface does not fall even when used vertically. |
 |  |
Avoid applying loads that exceed the load carrying range in the vertical direction.
Example of Use
| Electronics/Home Appliance | Automotive | Medical | ||
 |  |  | ||
| Smart Phones | Semiconductor | Lithium battery | ||
 |  |  |
Recommended operating environment: 10～50℃, 20～70%RH (no condensation)
Accuracy assurance environment: 22±5℃, 20～70％RH (no condensation)
■Guiding mechanism
This positioning stage adopts crossed roller guide as the guiding mechanism. Please refill the lubricant at the right time according to the usage conditions to prevent the life of crossed roller guide from being shortened due to the decrease of lubricant and aging.
■Clamping mechanism
①The clamping mechanism of the positioning stage is fixed by the frictional force generated by the fastening screw, so when the applied external force exceeds the frictional force of the clamping mechanism section, it will cause the positioning stage to move. The user should take appropriate measures to avoid movement of the positioning stage surface during use. If clamping reinforcement is required, disc clamping or opposite clamping can be selected.
②The holding force is the value of the force that keeps the positioning stage surface from moving in the clamped condition. Since the maximum holding force varies with the tightening torque, please ensure a sufficiently large safety factor when designing.
■Feed mechanism
The shape of a positioning stage with a micrometer knob installed as shown in the figure below is generally called the standard type. Free selection is possible by combining the installation space, mounting posture, and operation method. However, due to the structure of the product, there are some models where the installation position of the micrometer knob cannot be changed. For details, refer to the [Alteration] at the bottom of each product page.
■Flatness of the mounting surface
The upper and lower positioning stage surface may be deformed due to the different flatness of its mounting surface. Deformation of the positioning stage surface may result in gaps, looseness due to failure to obtain the specified preload, or poor sliding due to excessive preload. Therefore, it is recommended that the flatness of the mounting surface be kept at about 5 microns.
| X-Axis Motorized Positioning Stages | XY-Axis Motorized Positioning Stages | Z-Axis Motorized Positioning Stages | ||
 |  |  | ||
| Typical Model: C-XMBS420-L-A-2 | Typical Model: C-XYMBS420-L-A-2 | Typical Model: C-ZMBS420-L-A-2 | ||
| Advantages: low price, fast delivery | Advantages: low price, fast delivery | Advantages: low price, fast delivery |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Frequently asked question (FAQ)
- Question: What does a micrometer knob-type positioning stage with a travel distance of ±XX mean?
- Answer: The travel ±XXmm means how many millimeters can be moved in each direction, left and right or up and down, with the middle of the full travel of the micrometer knob as the base point.
- Question: What is the reset method of the micrometer knob type manual positioning stage? What should be paid attention to in use?
- Answer: The micrometer knob type manual positioning stage is reset by means of an extension spring. If the applied load is greater than the spring load, the positioning stage surface may not reset properly or the spring may be damaged directly, so take care when using it.
- Question: Can the positioning stage be mounted vertically? What should be paid attention to?
- Answer: Yes, it can. However, attention should be paid that the load capacity is about 1/3 of that for horizontal installation; and that the feed direction should not be the same as gravity direction, because if the applied force is greater than the spring load, the positioning stage surface may not be able to support the weight and may fall.
- Question: Can manual positioning stage products be used upside down?
- Answer: All except dovetail products. Dovetail products are strictly forbidden to be used upside down.
- Question: Is it possible to freely assemble the XY type positioning stage without the dimension or travel I want?
- Answer: Yes, it is.
Payment Method
- Credit Card
-
- Debit Cart
-
- Net Banking
-
- UPI
-
- Cheque on delivery
-
- Online payment
-
Social Media
MISUMI India Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy
Thank you for your cooperation.
Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.
Privacy Policy