What is the difference between ball bearing and roller bearing?

The contact between ball bearing and raceway is point contact, and the contact surface is oval when stressed. Because of the point contact, resisting force value is small, and the ball bearing is suitable for the application conditions of low torque and high rotational speed. They also have the characteristics of low noise. Ball bearings have low loading capacity but can bear radial and axial loads. The contact between roller bearing and raceway is line contact, and the contact surface is square when stressed. Because of the line contact, the torque of roller bearing is higher than that of ball bearing, and its rigidity is higher. Roller bearings have higher loading capacity, and cylindrical roller bearings have retaining edges to bear slight axial loads.

What is the classification of bearings according to the shape of rolling elements?

Rolling bearings are mainly divided into: ball bearings and roller bearings. Among them, ball bearings are divided into: deep groove ball bearings, angular contact bearings and radial thrust ball bearings. Roller bearings are divided into: cylindrical roller bearings, needle bearings, cone roller bearings and self-aligning roller bearings.

What is the classification of bearings according to load direction?

Bearing are divided into: radial bearings and thrust bearings according to the load direction. Among them, radial bearings are divided into: radial thrust ball bearings and radial roller bearings. Thrust bearings are divided into: thrust ball bearings and thrust roller bearings.

What is the basic rated life of rolling bearings?

The basic rated life of rolling bearings refers to the total number of revolutions that 90% of the ball bearings can rotate without peeling when eleven groups of ball bearings of the same kind and specification rotate respectively under the same conditions.

What is the contact angle of this angular contact ball bearing?

The contact angle of this angular contact ball bearing is 25 degrees, and the domestic common usage rate is relatively high.

Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(42 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

E-B7000-DB

Inner Dia. d Outer Dia. D Width B (or T) Basic Load Rating Cr (Dynamic) type CAD Days to Ship

Specification/Dimensions

Inner Dia. d(Ø)
10

12

15

17

20

25

30

35

40

45

50

55

60

65

70

75

80

85

90

95

100
Clear
Outer Dia. D(Ø)
26

28

30

32

35

40

42

47

52

55

62

68

72

75

80

85

90

95

100

110

115

120

125

130

140

145

150

160

170

180
Clear
Width B (or T)(mm)
8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

28

30

32

34
Clear
Basic Load Rating Cr (Dynamic)(N)
7550

8100

8800

9950

10900

12100

13200

16500

16700

18300

23500

23600

24900

28400

30400

34700

36200

38400

45700

50500

51800

54600

54700

61300

64000

69300

70900

79100

86700

88600

95700

106000

108000

109000

111000

113000

129000

139000

160000

183000

198000

223000
Clear
type
- E-B7□□□-DB
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

Same day
Clear

Specify Alterations

Angular Contact Ball Bearings Double Row DB Combination (Part Number)

Volume Discount

Check FAQ of this product (5 items)

Brand :

MiSUMi Economy

Part Number :

E-B7000-DB

E-B7001-DB

E-B7002-DB

E-B7003-DB

E-B7004-DB

E-B7005-DB

E-B7006-DB

E-B7007-DB

E-B7008-DB

E-B7009-DB

E-B7010-DB

E-B7011-DB

E-B7012-DB

E-B7013-DB

E-B7014-DB

E-B7015-DB

E-B7016-DB

E-B7017-DB

E-B7018-DB

E-B7019-DB

E-B7000-DB

Order Qty :
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

Product Description

Angular Contact Ball Bearings Double Row DB Combination
Angular contact ball bearings double row are commonly used in applications that require high precision, high speed. These bearings are available in various sizes to choose from.
[Feature]
● Bearing Size Standards: Metric System
● Inner Diameter Minimum / Maximum (mm.) : 10 and 100
● Outer Diameter Minimum / Maximum (mm.) : 26 and 180
● Width Minimum / Maximum (mm.) : 8 and 34
● Precision (JIS) : Class 5
● Bearing Type : Open (No cover)
● Load Direction : Radial / Thrust Load or Axial Load
[Application]
It is used to support and guide rotating machine's components, such as shafts, wheels, pulleys ,etc

Economy Angular Contact Ball Bearings

Double row angular contact bearings High-precision ball bearings DB combination bearings

- Double row design for enhanced load-bearing capacity

- Ideal for high-precision and high-speed applications

- Wide size range available

- Open design for optimal performance in various environments

- Class 5 precision for superior accuracy and reliability

MISUMI Standard

Cheaper Price

Product Variety

3D CAD
3D CAD Support

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 60; 90

Part Number
E-B7000-DB
E-B7001-DB
E-B7002-DB
E-B7003-DB
E-B7004-DB
E-B7005-DB
E-B7006-DB
E-B7007-DB
E-B7008-DB
E-B7009-DB
E-B7010-DB
E-B7011-DB
E-B7012-DB
E-B7013-DB
E-B7014-DB
E-B7015-DB
E-B7016-DB
E-B7017-DB
E-B7018-DB
E-B7019-DB
E-B7020-DB
E-B7200-DB
E-B7201-DB
E-B7202-DB
E-B7203-DB
E-B7204-DB
E-B7205-DB
E-B7206-DB
E-B7207-DB
E-B7208-DB
E-B7209-DB
E-B7210-DB
E-B7211-DB
E-B7212-DB
E-B7213-DB
E-B7214-DB
E-B7215-DB
E-B7216-DB
E-B7217-DB
E-B7218-DB
E-B7219-DB
E-B7220-DB

Price	Minimum Order Qty.	Volume Discount	Days to Ship	RoHS	Inner Dia. d (Ø)	Outer Dia. D (Ø)	Width B (or T) (mm)	Basic Load Rating Cr (Dynamic) (N)	Allowable Rotational Speed (rpm)	Basic Load Rating Cor (Static) (N)	Weight (g)
₹ 672.00	1 Piece(s)	Available	Same day	10	10	26	8	8100	27000	4650	42
₹ 668.00	1 Piece(s)	Available	Same day	10	12	28	8	8800	23000	5450	48
₹ 691.00	1 Piece(s)	Available	Same day	10	15	32	9	9950	20000	6850	70
₹ 756.00	1 Piece(s)	Available	Same day	10	17	35	10	10900	18000	8250	90
₹ 809.00	1 Piece(s)	Available	Same day	10	20	42	12	16700	15000	12200	158
₹ 1,012.00	1 Piece(s)	Available	Same day	10	25	47	12	18300	13000	14800	182
₹ 1,044.00	1 Piece(s)	Available	Same day	10	30	55	13	23600	11000	20200	266
₹ 1,212.00	1 Piece(s)	Available	Same day	10	35	62	14	28400	9800	25200	340
₹ 1,462.00	1 Piece(s)	Available	Same day	10	40	68	15	30400	8900	29200	420
₹ 1,688.00	1 Piece(s)	Available	Same day	10	45	75	16	36200	8000	35400	520
₹ 2,072.00	1 Piece(s)	Available	Same day	10	50	80	16	38400	7300	40200	580
₹ 2,241.00	1 Piece(s)	Available	Same day	10	55	90	18	50500	6600	52500	840
₹ 2,463.00	1 Piece(s)	Available	Same day	10	60	95	18	51800	6200	56100	900
₹ 2,698.00	1 Piece(s)	Available	Same day	10	65	100	18	54700	5800	62800	940
₹ 3,186.00	1 Piece(s)	Available	Same day	10	70	110	20	69300	5300	78700	1320
₹ 3,484.00	1 Piece(s)	Available	Same day	10	75	115	20	70900	5000	83400	1380
₹ 3,920.00	1 Piece(s)	Available	Same day	10	80	125	22	86700	4600	101000	1860
₹ 4,339.00	1 Piece(s)	Available	Same day	10	85	130	22	88600	4400	107000	1940
₹ 4,754.00	1 Piece(s)	Available	Same day	10	90	140	24	106000	4100	127000	2520
₹ 5,604.00	1 Piece(s)	Available	Same day	10	95	145	24	108000	3900	134000	2640
₹ 6,949.00	1 Piece(s)	Available	Same day	10	100	150	24	111000	3800	141000	2740
₹ 720.00	1 Piece(s)	Available	Same day	10	10	30	9	7550	23000	4400	62
₹ 734.00	1 Piece(s)	Available	Same day	10	12	32	10	12100	22000	7250	76
₹ 737.00	1 Piece(s)	Available	Same day	10	15	35	11	13200	19000	8550	96
₹ 748.00	1 Piece(s)	Available	Same day	10	17	40	12	16500	17000	11000	140
₹ 879.00	1 Piece(s)	Available	Same day	10	20	47	14	23500	14000	16800	224
₹ 926.00	1 Piece(s)	Available	Same day	10	25	52	15	24900	12000	19000	270
₹ 1,106.00	1 Piece(s)	Available	Same day	10	30	62	16	34700	10000	27400	416
₹ 1,248.00	1 Piece(s)	Available	Same day	10	35	72	17	45700	8800	37300	590
₹ 1,600.00	1 Piece(s)	Available	Same day	10	40	80	18	54600	8000	46700	764
₹ 1,695.00	1 Piece(s)	Available	Same day	10	45	85	19	61300	7500	53200	860
₹ 1,961.00	1 Piece(s)	Available	Same day	10	50	90	20	64000	6800	58700	970
₹ 2,370.00	1 Piece(s)	Available	Same day	10	55	100	21	79100	6100	74200	1270
₹ 2,700.00	1 Piece(s)	Available	Same day	10	60	110	22	95700	5500	91500	1640
₹ 2,872.00	1 Piece(s)	Available	Same day	10	65	120	23	109000	5200	108000	2040
₹ 3,397.00	1 Piece(s)	Available	Same day	10	70	125	24	113000	4900	111000	2240
₹ 3,949.00	1 Piece(s)	Available	Same day	10	75	130	25	129000	4600	130000	2460
₹ 4,432.00	1 Piece(s)	Available	Same day	10	80	140	26	139000	4300	143000	3000
₹ 5,338.00	1 Piece(s)	Available	Same day	10	85	150	28	160000	4000	167000	3740
₹ 6,265.00	1 Piece(s)	Available	Same day	10	90	160	30	183000	3800	193000	4600
₹ 7,299.00	1 Piece(s)	Available	Same day	10	95	170	32	198000	3500	207000	5560
₹ 8,841.00	1 Piece(s)	Available	Same day	10	100	180	34	223000	3300	235000	6640

Basic Information

Raceway Ring Shape	Angular Bearing (Double)	Bearing Type	Open	Outer Ring Type	Flat
Inner/Outer Ring Material	SUJ2 Equiv.	Specifications, Environment	Standard	Precision (JIS)	Class 5
Load Direction	Radial / Thrust Load, Axial	Rolling Element Material	SUJ2 Equiv.	Size Standards	Metric System
Number of Raceway Ring Rows	Double Row

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently asked question (FAQ)

Question: What is the difference between ball bearing and roller bearing?: Answer: The contact between ball bearing and raceway is point contact, and the contact surface is oval when stressed. Because of the point contact, resisting force value is small, and the ball bearing is suitable for the application conditions of low torque and high rotational speed. They also have the characteristics of low noise. Ball bearings have low loading capacity but can bear radial and axial loads. The contact between roller bearing and raceway is line contact, and the contact surface is square when stressed. Because of the line contact, the torque of roller bearing is higher than that of ball bearing, and its rigidity is higher. Roller bearings have higher loading capacity, and cylindrical roller bearings have retaining edges to bear slight axial loads.
Question: What is the classification of bearings according to the shape of rolling elements?: Answer: Rolling bearings are mainly divided into: ball bearings and roller bearings. Among them, ball bearings are divided into: deep groove ball bearings, angular contact bearings and radial thrust ball bearings. Roller bearings are divided into: cylindrical roller bearings, needle bearings, cone roller bearings and self-aligning roller bearings.
Question: What is the classification of bearings according to load direction?: Answer: Bearing are divided into: radial bearings and thrust bearings according to the load direction. Among them, radial bearings are divided into: radial thrust ball bearings and radial roller bearings. Thrust bearings are divided into: thrust ball bearings and thrust roller bearings.
Question: What is the basic rated life of rolling bearings?: Answer: The basic rated life of rolling bearings refers to the total number of revolutions that 90% of the ball bearings can rotate without peeling when eleven groups of ball bearings of the same kind and specification rotate respectively under the same conditions.
Question: What is the contact angle of this angular contact ball bearing?: Answer: The contact angle of this angular contact ball bearing is 25 degrees, and the domestic common usage rate is relatively high.

Check other FAQ (2 items) Hide

Search by Category / Brand

Search by Category

How can we improve?