(!)NOTE : Windows 7 users won’t be able to use some latest features of eCatalog/WOS since Microsoft is ending support for Windows 7 on 14 Jan, 2020. Please upgrade your system for uninterrupted services.

  • Viewed
    Products
  • My
    Components
  • Cart
Recently Viewed Products
X
My Components
X
Cart item(s)
X
Loading...
  • Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

Linear Shafts Both Ends Tapped with Wrench Flats (Part Number)

Linear Shafts Both Ends Tapped with Wrench Flats
You can add up to 6 items per a category to the compare list.

Part Number :
  • Order Qty :
  • Price :
    ---
  • Total Price :
    ---
  • Days to ship :
    ---

Select part number to Order Now/ Add to Cart

Product Overview
Linear guide shaft is a high precision shaft product, which can be used in combination with linear bushing and other bushing products. In addition to excellent abrasion resistance, it offers a variety of alterations.
Dimensional Drawing
misumi Guide Shafts Introduction
Specifications Overview
Type Material Hardness Surface Treatment
With Wrench Slot
Standard
D Tolerance g7D Tolerance f8
E-SFJZ-S45C or GCr15High Frequency Quenched
For effective hardening layer depth>>Refer to (PDF)
S45C or GCr15 55HRC~
SUS440C or equivalent high hardness corrosion resistant steel 53HRC~
-
E-SSFJZ-SUS440C or High hardness corrosion resistant steel
E-PSFJZ-S45C or GCr15Hard Chrome Plated
Plating hardness: HV750~
Plating thickness: 3μ or more
E-PSSFJZ-SUS440C or High hardness corrosion resistant steel
-E-PSFGZS45C-Hard Chrome Plated
Plating hardness: HV750~
Plating thickness: 10μ or more
Total length L requires M×2+N×2≤L. When M×2.5+4+N×2.5+4≥L, tap pilot holes may go through.
The hardness of shaft end machined part (effective thread length + approx. 10mm) may be reduced due to the annealing effect of machining.
If there are requirements for rust prevention, please give priority to the hard-chrome plated products. For anti-rust method, click here
If there are requirements for abrasion resistance, please select high-frequency quenched products.
Specification Table
Part NumberL
1mm increments
M (Coarse Thread) ·N (Coarse Thread)
Selection
Wrench slot size
TypeDSCW1
(D Tolerance g7)
E-SFJZ
E-SSFJZ
E-PSFJZ
E-PSSFJZ
(D Tolerance f8)
E-PSFGZ
625~6003          SC=1mm increments
SC+ℓ1≤L
SC≥0
58
825~800345        7
103456       8
1220~1000 4568      1010
1325~1000 4568      11
1530~1200 456810     13
16 456810     14
20 45681012    17
2535~1200 4568101216   22
3035~1500   6810121620  2715
35    81012162024 30
4050~1500     1012162024303620
5065~1500      121620243041
Alterations
Guide Shaft Bushing Unit Mechanism Full Range of Selections
When multiple alteration is selected, the machining parts need to be spaced by more than 2mm.
Alteration may reduce hardness, refer to here.
Precision Standard
■Tolerance of D Part
D Tolerance
Dg7f8
6-0.004
-0.016
-0.010
-0.028
8-0.005
-0.020
-0.013
-0.035
10
12-0.006
-0.024
-0.016
-0.043
13
15
16
20-0.007
-0.028
-0.020
-0.053
25
30
35-0.009
-0.034
-0.025
-0.064
40
50
■L dimension (Y dimension) tolerance
Dimension (more than)Dimension (to)Shaft Tolerance g7
26±0.1
630±0.2
30120±0.3
120400±0.5
4001000±0.8
10001500±1.2
Product Features
Feature 1: Extensively applied in various precision equipment thanks to high precision dimensional tolerance.
Feature 2: Bearing steel (S45C or GCr15) with excellent wear resistance and SUS440C or equivalent high hardness corrosion resistant steel are used for high frequency quenching, maintaining the original toughness while enhancing abrasion resistance.
Feature 3: A variety of alterations are available to accommodate different environments.
Feature 4: Usually combined with linear bushing products, achieving excellent linear guiding functionality, and less abrasion even if subject to high-speed reciprocal motion, as compared with general shaft and bushing structure.
Feature 5: The surface treatment of hard-chrome plating is available, achieving excellent anti-rust performance and HV750 plating hardness, as well as less abrasion when used in combination with high-hardness workpieces.
Precautions
MISUMI High Precision Guide Shafts One End Tapped With Wrench Flats With Through Hole Selection Catalog②Reduced hardness of machined parts
 Machining is performed after quenching of base metal. The parts that may be reduced in hardness due to annealing are:
 -All threaded
 -All stepped
 -Tapped: when M≥D/2, tapped double-hole type, hard chrome plated products made of SUS440C or high hardness corrosion resistant steel
 -Adds wrench flats (SC-WSC-SX)
 -Adds screw flats (FC-WFC)
 -Adds V-grooves (VC-WVC)
 -Except for full length hardened type.
Only the shaded portion of D part is hard chrome plated.
Guide Shafts One End Tapped With Wrench Flats With Through Hole Bushing MISUMI Quality Stainless Steel Material Imported from Japan
③Plating of surface treatment
 Machining is performed after surface treatment of base metal. No electroplating treatment is applied to the following parts:
 -Groove part
 -Threaded part
 -Tapped part
 -Wrench slot, V-groove, plane, cut section
 -The inside of the tube-type guide shaft may rust without hard chrome plating.
Example of Use
Standard Linear Motion Mechanism
Example Diagram
MISUMI Guide Shafts Full Range of Selections
Functions of standard linear motion mechanism
①Side-by-side use of two guide shafts effectively prevents workpiece rotation.
②Improved accuracy of linear motion and load capacity.
③The combination of guide shaft and linear bushing enables high-speed reciprocal motion.
④Low operational resistance, reducing the loss of workpiece.
Product Picture
Direct-from-Manufacturer MISUMI Guide Shafts Larger Image
Functions of key workpieces in the mechanism
Guide Shaft: Supporting the workpiece, combining with linear bushing to achieve guiding functionality.For details, click here
Linear bushing: Driving the workpiece to move on the guide shaft through the steel ball circulating structure.For details, click here
Guide shaft support: Supporting and fixing the guide shaft for effective adjustment of shaft pitch and improved equipment stability.For details, click here
Stopper: Performing limit action for adjustment of effective stroke of mechanism.For details, click here
Application Industries
Medical Semiconductor Electronic & Electrical
MISUMI High Frequency Quenched Shafts Selection Manufacturer MISUMI Guide Shafts Details Introduction Direct-from-Manufacturer Hollow Shafts for Sliding MISUMI Model
Smart Phones Food Automotive
LINEAR SHAFT Rigid Shafts Drawing Custom Size Hollow Shafts Chrome Plated Bar Dimensional Drawing Dedicated Linear Hollow Shafts Bearing Steel Stainless Steel Full Range of Models
Related Products
Linear Bushing Standard Type Straight Type Bearing with Housing T-Shaped Shaft Collars (Clamp)
Stainless Steel Rigid Shafts Chrome Plated Bar Machining misumi Linear Hollow Shafts Sales MISUMI Guide Shafts Introduction Linear Guide Shafts Unit Mechanism Design Selection
Representative model: LMU8 Representative model: BGHK6000ZZ-30 Representative model: SCS8-10
Related Documents
For anti-rust performance of metal materials and surface treatment, clickhere.

Part Number 

  • Incomplete part number.
    Please use left hand selections to complete a part number.
Loading...
Part Number
E-PSSFJZ15-[25-1200/1]-MSC[8,​10]-N[4,​5,​6,​8,​10]-SC[0-990/1]
E-PSSFJZ15-[25-1200/1]-MSC[8,​10]-ND[6,​8,​10]-SC[0-990/1]
E-PSSFJZ15-[25-1200/1]-MSC[8,​10]-NSC[8,​10]-SC[0-990/1]
E-PSSFJZ16-[30-1200/1]-M[4,​5,​6,​8,​10]-N[4,​5,​6,​8,​10]-SC[0-1190/1]
E-PSSFJZ16-[30-1200/1]-M[4,​5,​6,​8,​10]-ND[6,​8,​10]-SC[0-1190/1]
E-PSSFJZ16-[30-1200/1]-M[4,​5,​6,​8,​10]-NSC[8,​10]-SC[0-1190/1]
E-PSSFJZ16-[30-1200/1]-MD[6,​8,​10]-N[4,​5,​6,​8,​10]-SC[0-1190/1]
E-PSSFJZ16-[30-1200/1]-MD[6,​8,​10]-ND[6,​8,​10]-SC[0-1190/1]
E-PSSFJZ16-[30-1200/1]-MD[6,​8,​10]-NSC[8,​10]-SC[0-1190/1]
E-PSSFJZ16-[30-1200/1]-MSC[8,​10]-N[4,​5,​6,​8,​10]-SC[0-1190/1]
E-PSSFJZ16-[30-1200/1]-MSC[8,​10]-ND[6,​8,​10]-SC[0-1190/1]
E-PSSFJZ16-[30-1200/1]-MSC[8,​10]-NSC[8,​10]-SC[0-1190/1]
E-PSSFJZ20-[30-1200/1]-M[4,​5,​6,​8,​10,​12]-N[4,​5,​6,​8,​10,​12]-SC[0-1190/1]
E-PSSFJZ20-[30-1200/1]-M[4,​5,​6,​8,​10,​12]-ND[6,​8,​10,​12]-SC[0-1190/1]
E-PSSFJZ20-[30-1200/1]-M[4,​5,​6,​8,​10,​12]-NSC[8,​10,​12,​14]-SC[0-1190/1]
E-PSSFJZ20-[30-1200/1]-MD[6,​8,​10,​12]-N[4,​5,​6,​8,​10,​12]-SC[0-1190/1]
E-PSSFJZ20-[30-1200/1]-MD[6,​8,​10,​12]-ND[6,​8,​10,​12]-SC[0-1190/1]
E-PSSFJZ20-[30-1200/1]-MD[6,​8,​10,​12]-NSC[8,​10,​12,​14]-SC[0-1190/1]
E-PSSFJZ20-[30-1200/1]-MSC[8,​10,​12,​14]-N[4,​5,​6,​8,​10,​12]-SC[0-1190/1]
E-PSSFJZ20-[30-1200/1]-MSC[8,​10,​12,​14]-ND[6,​8,​10,​12]-SC[0-1190/1]
E-PSSFJZ20-[30-1200/1]-MSC[8,​10,​12,​14]-NSC[8,​10,​12,​14]-SC[0-1190/1]
E-PSSFJZ25-[35-1200/1]-M[4,​5,​6,​8,​10,​12,​16]-N[4,​5,​6,​8,​10,​12,​16]-SC[0-1190/1]
E-PSSFJZ25-[35-1200/1]-M[4,​5,​6,​8,​10,​12,​16]-ND[6,​8,​10,​12,​16]-SC[0-1190/1]
E-PSSFJZ25-[35-1200/1]-M[4,​5,​6,​8,​10,​12,​16]-NSC[8,​10,​12,​14,​18]-SC[0-1190/1]
E-PSSFJZ25-[35-1200/1]-MD[6,​8,​10,​12,​16]-N[4,​5,​6,​8,​10,​12,​16]-SC[0-1190/1]
E-PSSFJZ25-[35-1200/1]-MD[6,​8,​10,​12,​16]-ND[6,​8,​10,​12,​16]-SC[0-1190/1]
E-PSSFJZ25-[35-1200/1]-MD[6,​8,​10,​12,​16]-NSC[8,​10,​12,​14,​18]-SC[0-1190/1]
E-PSSFJZ25-[35-1200/1]-MSC[8,​10,​12,​14,​18]-N[4,​5,​6,​8,​10,​12,​16]-SC[0-1190/1]
E-PSSFJZ25-[35-1200/1]-MSC[8,​10,​12,​14,​18]-ND[6,​8,​10,​12,​16]-SC[0-1190/1]
E-PSSFJZ25-[35-1200/1]-MSC[8,​10,​12,​14,​18]-NSC[8,​10,​12,​14,​18]-SC[0-1190/1]
E-SFJZ8-[20-1000/1]-M[3,​4,​5]-N[3,​4,​5]-SC[0-792/1]
E-SFJZ10-[20-1000/1]-M[3,​4,​5,​6]-N[3,​4,​5,​6]-SC[0-792/1]
E-SFJZ10-[20-1000/1]-M[3,​4,​5,​6]-ND6-SC[0-792/1]
E-SFJZ10-[20-1000/1]-MD6-N[3,​4,​5,​6]-SC[0-792/1]
E-SFJZ10-[20-1000/1]-MD6-ND6-SC[0-792/1]
E-SFJZ12-[20-1200/1]-M[4,​5,​6,​8]-N[4,​5,​6,​8]-SC[0-990/1]
E-SFJZ12-[20-1200/1]-M[4,​5,​6,​8]-ND[6,​8]-SC[0-990/1]
E-SFJZ12-[20-1200/1]-M[4,​5,​6,​8]-NSC8-SC[0-990/1]
E-SFJZ12-[20-1200/1]-MD[6,​8]-N[4,​5,​6,​8]-SC[0-990/1]
E-SFJZ12-[20-1200/1]-MD[6,​8]-ND[6,​8]-SC[0-990/1]
E-SFJZ12-[20-1200/1]-MD[6,​8]-NSC8-SC[0-990/1]
E-SFJZ12-[20-1200/1]-MSC8-N[4,​5,​6,​8]-SC[0-990/1]
E-SFJZ12-[20-1200/1]-MSC8-ND[6,​8]-SC[0-990/1]
E-SFJZ12-[20-1200/1]-MSC8-NSC8-SC[0-990/1]
E-SFJZ13-[25-1200/1]-M[4,​5,​6,​8]-N[4,​5,​6,​8]-SC[0-990/1]
E-SFJZ13-[25-1200/1]-M[4,​5,​6,​8]-ND[6,​8]-SC[0-990/1]
E-SFJZ13-[25-1200/1]-M[4,​5,​6,​8]-NSC8-SC[0-990/1]
E-SFJZ13-[25-1200/1]-MD[6,​8]-N[4,​5,​6,​8]-SC[0-990/1]
E-SFJZ13-[25-1200/1]-MD[6,​8]-ND[6,​8]-SC[0-990/1]
E-SFJZ13-[25-1200/1]-MD[6,​8]-NSC8-SC[0-990/1]
E-SFJZ13-[25-1200/1]-MSC8-N[4,​5,​6,​8]-SC[0-990/1]
E-SFJZ13-[25-1200/1]-MSC8-ND[6,​8]-SC[0-990/1]
E-SFJZ13-[25-1200/1]-MSC8-NSC8-SC[0-990/1]
E-SFJZ15-[25-1200/1]-M[4,​5,​6,​8,​10]-N[4,​5,​6,​8,​10]-SC[0-990/1]
E-SFJZ15-[25-1200/1]-M[4,​5,​6,​8,​10]-ND[6,​8,​10]-SC[0-990/1]
E-SFJZ15-[25-1200/1]-M[4,​5,​6,​8,​10]-NSC[8,​10]-SC[0-990/1]
E-SFJZ15-[25-1200/1]-MD[6,​8,​10]-N[4,​5,​6,​8,​10]-SC[0-990/1]
E-SFJZ15-[25-1200/1]-MD[6,​8,​10]-ND[6,​8,​10]-SC[0-990/1]
E-SFJZ15-[25-1200/1]-MD[6,​8,​10]-NSC[8,​10]-SC[0-990/1]
E-SFJZ15-[25-1200/1]-MSC[8,​10]-N[4,​5,​6,​8,​10]-SC[0-990/1]
E-SFJZ15-[25-1200/1]-MSC[8,​10]-ND[6,​8,​10]-SC[0-990/1]
E-SFJZ15-[25-1200/1]-MSC[8,​10]-NSC[8,​10]-SC[0-990/1]
E-SFJZ16-[30-1200/1]-M[4,​5,​6,​8,​10]-N[4,​5,​6,​8,​10]-SC[0-1190/1]
E-SFJZ16-[30-1200/1]-M[4,​5,​6,​8,​10]-ND[6,​8,​10]-SC[0-1190/1]
E-SFJZ16-[30-1200/1]-M[4,​5,​6,​8,​10]-NSC[8,​10]-SC[0-1190/1]
E-SFJZ16-[30-1200/1]-MD[6,​8,​10]-N[4,​5,​6,​8,​10]-SC[0-1190/1]
E-SFJZ16-[30-1200/1]-MD[6,​8,​10]-ND[6,​8,​10]-SC[0-1190/1]
E-SFJZ16-[30-1200/1]-MD[6,​8,​10]-NSC[8,​10]-SC[0-1190/1]
E-SFJZ16-[30-1200/1]-MSC[8,​10]-N[4,​5,​6,​8,​10]-SC[0-1190/1]
E-SFJZ16-[30-1200/1]-MSC[8,​10]-ND[6,​8,​10]-SC[0-1190/1]
E-SFJZ16-[30-1200/1]-MSC[8,​10]-NSC[8,​10]-SC[0-1190/1]
E-SFJZ20-[30-1200/1]-M[4,​5,​6,​8,​10,​12]-N[4,​5,​6,​8,​10,​12]-SC[0-1190/1]
E-SFJZ20-[30-1200/1]-M[4,​5,​6,​8,​10,​12]-ND[6,​8,​10,​12]-SC[0-1190/1]
E-SFJZ20-[30-1200/1]-M[4,​5,​6,​8,​10,​12]-NSC[8,​10,​12,​14]-SC[0-1190/1]
E-SFJZ20-[30-1200/1]-MD[6,​8,​10,​12]-N[4,​5,​6,​8,​10,​12]-SC[0-1190/1]
E-SFJZ20-[30-1200/1]-MD[6,​8,​10,​12]-ND[6,​8,​10,​12]-SC[0-1190/1]
E-SFJZ20-[30-1200/1]-MD[6,​8,​10,​12]-NSC[8,​10,​12,​14]-SC[0-1190/1]
E-SFJZ20-[30-1200/1]-MSC[8,​10,​12,​14]-N[4,​5,​6,​8,​10,​12]-SC[0-1190/1]
E-SFJZ20-[30-1200/1]-MSC[8,​10,​12,​14]-ND[6,​8,​10,​12]-SC[0-1190/1]
E-SFJZ20-[30-1200/1]-MSC[8,​10,​12,​14]-NSC[8,​10,​12,​14]-SC[0-1190/1]
E-SFJZ25-[35-1200/1]-M[4,​5,​6,​8,​10,​12,​16]-N[4,​5,​6,​8,​10,​12,​16]-SC[0-1190/1]
E-SFJZ25-[35-1200/1]-M[4,​5,​6,​8,​10,​12,​16]-ND[6,​8,​10,​12,​16]-SC[0-1190/1]
E-SFJZ25-[35-1200/1]-M[4,​5,​6,​8,​10,​12,​16]-NSC[8,​10,​12,​14,​18]-SC[0-1190/1]
E-SFJZ25-[35-1200/1]-MD[6,​8,​10,​12,​16]-N[4,​5,​6,​8,​10,​12,​16]-SC[0-1190/1]
E-SFJZ25-[35-1200/1]-MD[6,​8,​10,​12,​16]-ND[6,​8,​10,​12,​16]-SC[0-1190/1]
E-SFJZ25-[35-1200/1]-MD[6,​8,​10,​12,​16]-NSC[8,​10,​12,​14,​18]-SC[0-1190/1]
E-SFJZ25-[35-1200/1]-MSC[8,​10,​12,​14,​18]-N[4,​5,​6,​8,​10,​12,​16]-SC[0-1190/1]
E-SFJZ25-[35-1200/1]-MSC[8,​10,​12,​14,​18]-ND[6,​8,​10,​12,​16]-SC[0-1190/1]
E-SFJZ25-[35-1200/1]-MSC[8,​10,​12,​14,​18]-NSC[8,​10,​12,​14,​18]-SC[0-1190/1]
E-SSFJZ6-[20-800/1]-M3-N3-SC[0-592/1]
Part NumberPriceMinimum Order Qty.Volume DiscountDays to ShipRoHSMaterial Heat Treatment Surface Treatment Shaft Dia. D
(Ø)
Length L
(mm)
Shaft Fit Tolerance Fastening Tool Type Tapped M (Coarse Thread)
(mm)
Changes tapped thread to fine one [MSC]
(mm)
Changes tapped thread to fine one [NSC]
(mm)
H
(mm)
MD ND Tapped N (Coarse thread)
(mm)
SC
(mm)

-

1 Piece(s) 9 Day(s) 10[Stainless Steel] Martensite stainless steelInduction HardenedHard Chrome Plating1525 ~ 1200g7With Wrench Slot-8 ~ 10----4 ~ 100 ~ 990

-

1 Piece(s) 9 Day(s) 10[Stainless Steel] Martensite stainless steelInduction HardenedHard Chrome Plating1525 ~ 1200g7With Wrench Slot-8 ~ 10---6 ~ 10-0 ~ 990

-

1 Piece(s) 9 Day(s) 10[Stainless Steel] Martensite stainless steelInduction HardenedHard Chrome Plating1525 ~ 1200g7With Wrench Slot-8 ~ 108 ~ 10----0 ~ 990

-

1 Piece(s) 9 Day(s) 10[Stainless Steel] Martensite stainless steelInduction HardenedHard Chrome Plating1630 ~ 1200g7With Wrench Slot4 ~ 10-----4 ~ 100 ~ 1190

-

1 Piece(s) 9 Day(s) 10[Stainless Steel] Martensite stainless steelInduction HardenedHard Chrome Plating1630 ~ 1200g7With Wrench Slot4 ~ 10----6 ~ 10-0 ~ 1190

-

1 Piece(s) 9 Day(s) 10[Stainless Steel] Martensite stainless steelInduction HardenedHard Chrome Plating1630 ~ 1200g7With Wrench Slot4 ~ 10-8 ~ 10----0 ~ 1190

-

1 Piece(s) 9 Day(s) 10[Stainless Steel] Martensite stainless steelInduction HardenedHard Chrome Plating1630 ~ 1200g7With Wrench Slot----6 ~ 10-4 ~ 100 ~ 1190

-

1 Piece(s) 9 Day(s) 10[Stainless Steel] Martensite stainless steelInduction HardenedHard Chrome Plating1630 ~ 1200g7With Wrench Slot----6 ~ 106 ~ 10-0 ~ 1190

-

1 Piece(s) 9 Day(s) 10[Stainless Steel] Martensite stainless steelInduction HardenedHard Chrome Plating1630 ~ 1200g7With Wrench Slot--8 ~ 10-6 ~ 10--0 ~ 1190

-

1 Piece(s) 9 Day(s) 10[Stainless Steel] Martensite stainless steelInduction HardenedHard Chrome Plating1630 ~ 1200g7With Wrench Slot-8 ~ 10----4 ~ 100 ~ 1190

-

1 Piece(s) 9 Day(s) 10[Stainless Steel] Martensite stainless steelInduction HardenedHard Chrome Plating1630 ~ 1200g7With Wrench Slot-8 ~ 10---6 ~ 10-0 ~ 1190

-

1 Piece(s) 9 Day(s) 10[Stainless Steel] Martensite stainless steelInduction HardenedHard Chrome Plating1630 ~ 1200g7With Wrench Slot-8 ~ 108 ~ 10----0 ~ 1190

-

1 Piece(s) 9 Day(s) 10[Stainless Steel] Martensite stainless steelInduction HardenedHard Chrome Plating2030 ~ 1200g7With Wrench Slot4 ~ 12-----4 ~ 120 ~ 1190

-

1 Piece(s) 9 Day(s) 10[Stainless Steel] Martensite stainless steelInduction HardenedHard Chrome Plating2030 ~ 1200g7With Wrench Slot4 ~ 12----6 ~ 12-0 ~ 1190

-

1 Piece(s) 9 Day(s) 10[Stainless Steel] Martensite stainless steelInduction HardenedHard Chrome Plating2030 ~ 1200g7With Wrench Slot4 ~ 12-8 ~ 14----0 ~ 1190

-

1 Piece(s) 9 Day(s) 10[Stainless Steel] Martensite stainless steelInduction HardenedHard Chrome Plating2030 ~ 1200g7With Wrench Slot----6 ~ 12-4 ~ 120 ~ 1190

-

1 Piece(s) 9 Day(s) 10[Stainless Steel] Martensite stainless steelInduction HardenedHard Chrome Plating2030 ~ 1200g7With Wrench Slot----6 ~ 126 ~ 12-0 ~ 1190

-

1 Piece(s) 9 Day(s) 10[Stainless Steel] Martensite stainless steelInduction HardenedHard Chrome Plating2030 ~ 1200g7With Wrench Slot--8 ~ 14-6 ~ 12--0 ~ 1190

-

1 Piece(s) 9 Day(s) 10[Stainless Steel] Martensite stainless steelInduction HardenedHard Chrome Plating2030 ~ 1200g7With Wrench Slot-8 ~ 14----4 ~ 120 ~ 1190

-

1 Piece(s) 9 Day(s) 10[Stainless Steel] Martensite stainless steelInduction HardenedHard Chrome Plating2030 ~ 1200g7With Wrench Slot-8 ~ 14---6 ~ 12-0 ~ 1190

-

1 Piece(s) 9 Day(s) 10[Stainless Steel] Martensite stainless steelInduction HardenedHard Chrome Plating2030 ~ 1200g7With Wrench Slot-8 ~ 148 ~ 14----0 ~ 1190

-

1 Piece(s) 9 Day(s) 10[Stainless Steel] Martensite stainless steelInduction HardenedHard Chrome Plating2535 ~ 1200g7With Wrench Slot4 ~ 16-----4 ~ 160 ~ 1190

-

1 Piece(s) 9 Day(s) 10[Stainless Steel] Martensite stainless steelInduction HardenedHard Chrome Plating2535 ~ 1200g7With Wrench Slot4 ~ 16----6 ~ 16-0 ~ 1190

-

1 Piece(s) 9 Day(s) 10[Stainless Steel] Martensite stainless steelInduction HardenedHard Chrome Plating2535 ~ 1200g7With Wrench Slot4 ~ 16-8 ~ 18----0 ~ 1190

-

1 Piece(s) 9 Day(s) 10[Stainless Steel] Martensite stainless steelInduction HardenedHard Chrome Plating2535 ~ 1200g7With Wrench Slot----6 ~ 16-4 ~ 160 ~ 1190

-

1 Piece(s) 9 Day(s) 10[Stainless Steel] Martensite stainless steelInduction HardenedHard Chrome Plating2535 ~ 1200g7With Wrench Slot----6 ~ 166 ~ 16-0 ~ 1190

-

1 Piece(s) 9 Day(s) 10[Stainless Steel] Martensite stainless steelInduction HardenedHard Chrome Plating2535 ~ 1200g7With Wrench Slot--8 ~ 18-6 ~ 16--0 ~ 1190

-

1 Piece(s) 9 Day(s) 10[Stainless Steel] Martensite stainless steelInduction HardenedHard Chrome Plating2535 ~ 1200g7With Wrench Slot-8 ~ 18----4 ~ 160 ~ 1190

-

1 Piece(s) 9 Day(s) 10[Stainless Steel] Martensite stainless steelInduction HardenedHard Chrome Plating2535 ~ 1200g7With Wrench Slot-8 ~ 18---6 ~ 16-0 ~ 1190

-

1 Piece(s) 9 Day(s) 10[Stainless Steel] Martensite stainless steelInduction HardenedHard Chrome Plating2535 ~ 1200g7With Wrench Slot-8 ~ 188 ~ 18----0 ~ 1190

-

1 Piece(s) 9 Day(s) 10[Steel] S45C or GCr15Induction HardenedNot Provided820 ~ 1000g7With Wrench Slot3 ~ 5-----3 ~ 50 ~ 792

-

1 Piece(s) 9 Day(s) 10[Steel] S45C or GCr15Induction HardenedNot Provided1020 ~ 1000g7With Wrench Slot3 ~ 6-----3 ~ 60 ~ 792

-

1 Piece(s) 9 Day(s) 10[Steel] S45C or GCr15Induction HardenedNot Provided1020 ~ 1000g7With Wrench Slot3 ~ 6----6-0 ~ 792

-

1 Piece(s) 9 Day(s) 10[Steel] S45C or GCr15Induction HardenedNot Provided1020 ~ 1000g7With Wrench Slot----6-3 ~ 60 ~ 792

-

1 Piece(s) 9 Day(s) 10[Steel] S45C or GCr15Induction HardenedNot Provided1020 ~ 1000g7With Wrench Slot----66-0 ~ 792

-

1 Piece(s) 9 Day(s) 10[Steel] S45C or GCr15Induction HardenedNot Provided1220 ~ 1200g7With Wrench Slot4 ~ 8-----4 ~ 80 ~ 990

-

1 Piece(s) 9 Day(s) 10[Steel] S45C or GCr15Induction HardenedNot Provided1220 ~ 1200g7With Wrench Slot4 ~ 8----6 ~ 8-0 ~ 990

-

1 Piece(s) 9 Day(s) 10[Steel] S45C or GCr15Induction HardenedNot Provided1220 ~ 1200g7With Wrench Slot4 ~ 8-8----0 ~ 990

-

1 Piece(s) 9 Day(s) 10[Steel] S45C or GCr15Induction HardenedNot Provided1220 ~ 1200g7With Wrench Slot----6 ~ 8-4 ~ 80 ~ 990

-

1 Piece(s) 9 Day(s) 10[Steel] S45C or GCr15Induction HardenedNot Provided1220 ~ 1200g7With Wrench Slot----6 ~ 86 ~ 8-0 ~ 990

-

1 Piece(s) 9 Day(s) 10[Steel] S45C or GCr15Induction HardenedNot Provided1220 ~ 1200g7With Wrench Slot--8-6 ~ 8--0 ~ 990

-

1 Piece(s) 9 Day(s) 10[Steel] S45C or GCr15Induction HardenedNot Provided1220 ~ 1200g7With Wrench Slot-8----4 ~ 80 ~ 990

-

1 Piece(s) 9 Day(s) 10[Steel] S45C or GCr15Induction HardenedNot Provided1220 ~ 1200g7With Wrench Slot-8---6 ~ 8-0 ~ 990

-

1 Piece(s) 9 Day(s) 10[Steel] S45C or GCr15Induction HardenedNot Provided1220 ~ 1200g7With Wrench Slot-88----0 ~ 990

-

1 Piece(s) 9 Day(s) 10[Steel] S45C or GCr15Induction HardenedNot Provided1325 ~ 1200g7With Wrench Slot4 ~ 8-----4 ~ 80 ~ 990

-

1 Piece(s) 9 Day(s) 10[Steel] S45C or GCr15Induction HardenedNot Provided1325 ~ 1200g7With Wrench Slot4 ~ 8----6 ~ 8-0 ~ 990

-

1 Piece(s) 9 Day(s) 10[Steel] S45C or GCr15Induction HardenedNot Provided1325 ~ 1200g7With Wrench Slot4 ~ 8-8----0 ~ 990

-

1 Piece(s) 9 Day(s) 10[Steel] S45C or GCr15Induction HardenedNot Provided1325 ~ 1200g7With Wrench Slot----6 ~ 8-4 ~ 80 ~ 990

-

1 Piece(s) 9 Day(s) 10[Steel] S45C or GCr15Induction HardenedNot Provided1325 ~ 1200g7With Wrench Slot----6 ~ 86 ~ 8-0 ~ 990

-

1 Piece(s) 9 Day(s) 10[Steel] S45C or GCr15Induction HardenedNot Provided1325 ~ 1200g7With Wrench Slot--8-6 ~ 8--0 ~ 990

-

1 Piece(s) 9 Day(s) 10[Steel] S45C or GCr15Induction HardenedNot Provided1325 ~ 1200g7With Wrench Slot-8----4 ~ 80 ~ 990

-

1 Piece(s) 9 Day(s) 10[Steel] S45C or GCr15Induction HardenedNot Provided1325 ~ 1200g7With Wrench Slot-8---6 ~ 8-0 ~ 990

-

1 Piece(s) 9 Day(s) 10[Steel] S45C or GCr15Induction HardenedNot Provided1325 ~ 1200g7With Wrench Slot-88----0 ~ 990

-

1 Piece(s) 9 Day(s) 10[Steel] S45C or GCr15Induction HardenedNot Provided1525 ~ 1200g7With Wrench Slot4 ~ 10-----4 ~ 100 ~ 990

-

1 Piece(s) 9 Day(s) 10[Steel] S45C or GCr15Induction HardenedNot Provided1525 ~ 1200g7With Wrench Slot4 ~ 10----6 ~ 10-0 ~ 990

-

1 Piece(s) 9 Day(s) 10[Steel] S45C or GCr15Induction HardenedNot Provided1525 ~ 1200g7With Wrench Slot4 ~ 10-8 ~ 10----0 ~ 990

-

1 Piece(s) 9 Day(s) 10[Steel] S45C or GCr15Induction HardenedNot Provided1525 ~ 1200g7With Wrench Slot----6 ~ 10-4 ~ 100 ~ 990

-

1 Piece(s) 9 Day(s) 10[Steel] S45C or GCr15Induction HardenedNot Provided1525 ~ 1200g7With Wrench Slot----6 ~ 106 ~ 10-0 ~ 990

-

1 Piece(s) 9 Day(s) 10[Steel] S45C or GCr15Induction HardenedNot Provided1525 ~ 1200g7With Wrench Slot--8 ~ 10-6 ~ 10--0 ~ 990

-

1 Piece(s) 9 Day(s) 10[Steel] S45C or GCr15Induction HardenedNot Provided1525 ~ 1200g7With Wrench Slot-8 ~ 10----4 ~ 100 ~ 990

-

1 Piece(s) 9 Day(s) 10[Steel] S45C or GCr15Induction HardenedNot Provided1525 ~ 1200g7With Wrench Slot-8 ~ 10---6 ~ 10-0 ~ 990

-

1 Piece(s) 9 Day(s) 10[Steel] S45C or GCr15Induction HardenedNot Provided1525 ~ 1200g7With Wrench Slot-8 ~ 108 ~ 10----0 ~ 990

-

1 Piece(s) 9 Day(s) 10[Steel] S45C or GCr15Induction HardenedNot Provided1630 ~ 1200g7With Wrench Slot4 ~ 10-----4 ~ 100 ~ 1190

-

1 Piece(s) 9 Day(s) 10[Steel] S45C or GCr15Induction HardenedNot Provided1630 ~ 1200g7With Wrench Slot4 ~ 10----6 ~ 10-0 ~ 1190

-

1 Piece(s) 9 Day(s) 10[Steel] S45C or GCr15Induction HardenedNot Provided1630 ~ 1200g7With Wrench Slot4 ~ 10-8 ~ 10----0 ~ 1190

-

1 Piece(s) 9 Day(s) 10[Steel] S45C or GCr15Induction HardenedNot Provided1630 ~ 1200g7With Wrench Slot----6 ~ 10-4 ~ 100 ~ 1190

-

1 Piece(s) 9 Day(s) 10[Steel] S45C or GCr15Induction HardenedNot Provided1630 ~ 1200g7With Wrench Slot----6 ~ 106 ~ 10-0 ~ 1190

-

1 Piece(s) 9 Day(s) 10[Steel] S45C or GCr15Induction HardenedNot Provided1630 ~ 1200g7With Wrench Slot--8 ~ 10-6 ~ 10--0 ~ 1190

-

1 Piece(s) 9 Day(s) 10[Steel] S45C or GCr15Induction HardenedNot Provided1630 ~ 1200g7With Wrench Slot-8 ~ 10----4 ~ 100 ~ 1190

-

1 Piece(s) 9 Day(s) 10[Steel] S45C or GCr15Induction HardenedNot Provided1630 ~ 1200g7With Wrench Slot-8 ~ 10---6 ~ 10-0 ~ 1190

-

1 Piece(s) 9 Day(s) 10[Steel] S45C or GCr15Induction HardenedNot Provided1630 ~ 1200g7With Wrench Slot-8 ~ 108 ~ 10----0 ~ 1190

-

1 Piece(s) 9 Day(s) 10[Steel] S45C or GCr15Induction HardenedNot Provided2030 ~ 1200g7With Wrench Slot4 ~ 12-----4 ~ 120 ~ 1190

-

1 Piece(s) 9 Day(s) 10[Steel] S45C or GCr15Induction HardenedNot Provided2030 ~ 1200g7With Wrench Slot4 ~ 12----6 ~ 12-0 ~ 1190

-

1 Piece(s) 9 Day(s) 10[Steel] S45C or GCr15Induction HardenedNot Provided2030 ~ 1200g7With Wrench Slot4 ~ 12-8 ~ 14----0 ~ 1190

-

1 Piece(s) 9 Day(s) 10[Steel] S45C or GCr15Induction HardenedNot Provided2030 ~ 1200g7With Wrench Slot----6 ~ 12-4 ~ 120 ~ 1190

-

1 Piece(s) 9 Day(s) 10[Steel] S45C or GCr15Induction HardenedNot Provided2030 ~ 1200g7With Wrench Slot----6 ~ 126 ~ 12-0 ~ 1190

-

1 Piece(s) 9 Day(s) 10[Steel] S45C or GCr15Induction HardenedNot Provided2030 ~ 1200g7With Wrench Slot--8 ~ 14-6 ~ 12--0 ~ 1190

-

1 Piece(s) 9 Day(s) 10[Steel] S45C or GCr15Induction HardenedNot Provided2030 ~ 1200g7With Wrench Slot-8 ~ 14----4 ~ 120 ~ 1190

-

1 Piece(s) 9 Day(s) 10[Steel] S45C or GCr15Induction HardenedNot Provided2030 ~ 1200g7With Wrench Slot-8 ~ 14---6 ~ 12-0 ~ 1190

-

1 Piece(s) 9 Day(s) 10[Steel] S45C or GCr15Induction HardenedNot Provided2030 ~ 1200g7With Wrench Slot-8 ~ 148 ~ 14----0 ~ 1190

-

1 Piece(s) 9 Day(s) 10[Steel] S45C or GCr15Induction HardenedNot Provided2535 ~ 1200g7With Wrench Slot4 ~ 16-----4 ~ 160 ~ 1190

-

1 Piece(s) 9 Day(s) 10[Steel] S45C or GCr15Induction HardenedNot Provided2535 ~ 1200g7With Wrench Slot4 ~ 16----6 ~ 16-0 ~ 1190

-

1 Piece(s) 9 Day(s) 10[Steel] S45C or GCr15Induction HardenedNot Provided2535 ~ 1200g7With Wrench Slot4 ~ 16-8 ~ 18----0 ~ 1190

-

1 Piece(s) 9 Day(s) 10[Steel] S45C or GCr15Induction HardenedNot Provided2535 ~ 1200g7With Wrench Slot----6 ~ 16-4 ~ 160 ~ 1190

-

1 Piece(s) 9 Day(s) 10[Steel] S45C or GCr15Induction HardenedNot Provided2535 ~ 1200g7With Wrench Slot----6 ~ 166 ~ 16-0 ~ 1190

-

1 Piece(s) 9 Day(s) 10[Steel] S45C or GCr15Induction HardenedNot Provided2535 ~ 1200g7With Wrench Slot--8 ~ 18-6 ~ 16--0 ~ 1190

-

1 Piece(s) 9 Day(s) 10[Steel] S45C or GCr15Induction HardenedNot Provided2535 ~ 1200g7With Wrench Slot-8 ~ 18----4 ~ 160 ~ 1190

-

1 Piece(s) 9 Day(s) 10[Steel] S45C or GCr15Induction HardenedNot Provided2535 ~ 1200g7With Wrench Slot-8 ~ 18---6 ~ 16-0 ~ 1190

-

1 Piece(s) 9 Day(s) 10[Steel] S45C or GCr15Induction HardenedNot Provided2535 ~ 1200g7With Wrench Slot-8 ~ 188 ~ 18----0 ~ 1190

-

1 Piece(s) 9 Day(s) 10[Stainless Steel] Martensite stainless steelInduction HardenedNot Provided620 ~ 800g7With Wrench Slot3-----30 ~ 592

Loading...

Basic Information

Basic Shape Solid End Shape (Left) Tapped End Shape (Right) Tapped
Shaft End Perpendicularity Perpendicularity (0.2) Precision Standard

Frequently asked question (FAQ)

Question: Why are stainless steel guide shafts rusting?
Answer: Guide shafts are made of SUS440C, which are quenched for better abrasion resistance, but the material itself is weak to corrosion. Therefore, please select hard chrome plated products for applications with higher anti-rust requirements.
Question: Why is the hardness measured on the end face center is rather low in contrast with high hardness indicated for guide shaft products in the catalog?
Answer: As the guide shaft is high-frequency quenched, a hardening layer of certain depth will form on the outer circle of the guide shaft. To ensure toughness, the material will retain original hardness at the center of the guide shaft.
Question: What are the advantages of combining guide shaft with linear bushing?
Answer: Due to rolling friction fit with the linear bushing, the guide shaft can achieve high-accuracy linear motion, causing less friction resistance to the workpiece, thus suitable for extended continuous operation.
Question: How to select models of shaft products requiring a length of 100.5mm?
Answer: The total length can be customized in 0.1mm increments with LKC alteration.
Question: Why is the end face of hard chrome plated guide shaft rusting?
Answer: The guide shaft is cut after surface treatment during material preparation. Thereafter, no surface treatment will be performed, so the cut surface is not hard-chrome plated, thus causing the end face to rust.
Question: When combined with linear bushing, some guide shafts fit closely, while others fit with clearance. Does it affect usage?
Answer: The guide shaft and linear bushing fit with each other by point-contact rolling through the steel ball circulating structure. Due to the point-contact and non-interference fit, some clearance between the shaft and the bushing is normal, which will not affect usage. The use of this structure greatly reduces frictional resistance and improves service life of the workpiece.
Question: Is the stainless steel material of MISUMI guide shafts imported?
Answer: Both the bearing steel (SUJ2) and stainless steel (SUS440C) of MISUMI guide shafts are materials imported from Japan.
Question: I hope to know about the detection method and specification accuracy of the straightness of guide shafts.
Answer: Support both ends of the guide shaft with V-shaped blocks, rotate the shaft for 1 turn at any point, and measure the amplitude of the dial meter. 1/2 of the amplitude measurement value is the straightness. Straightness varies with outer diameter and length.
Question: How much is the perpendicularity accuracy of guide shaft?
Answer: The perpendicularity of guide shaft is 0.2 for standard type and 0.03 for precision type.

Check other FAQ (6 items) Hide

X
whatsapp-qr whatsapp-icon