How is linear bearing maintained regularly?

MISUMI recommends that linear bearing is regularly replenished with grease, and it is recommended to do so once every six months. When the moving distance is long, it is recommended to move once every three months or when the moving distance exceeds 1000km within the time limit, the 1000km shall prevail.

Comparison of antirust ability of linear bearings?

Antirust ability from strong to weak: Low Temp. Black Chrome Plating → No-Electro Nickel Plated → No Surface Treatment. Standard grade bearing steel is easy to rust, so it is necessary to apply anti-rust oil regularly.

Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 6:30 24/11/2024 to 4:30 (IST) 25/11/2024. We apologize for the inconvenience.
Please note that the MISUMI Pune office and warehouse will be closed on November 20th due to the state election.
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(18 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

E-LBHP6LUU

Inscribed Circle Dia. dr Overall Length L Outer Cylinder Surface Treatment Outer Dia. D Ball Recirculating Type Eccentricity Length CAD Days to Ship

Specification/Dimensions

Inscribed Circle Dia. dr(Ø)
6

8

10

12

16

20

25

30

40
Clear
Overall Length L(mm)
19

24

29

30

35

37

42

45

55

57

59

64

70

80

112

123

151
Clear
Outer Cylinder Surface Treatment
- No Surface Treatment
- Surface Treatment
  - Electroless Nickel Plating
Clear
Outer Dia. D(Ø)
12

15

19

21

28

32

40

45

60
Clear
Ball Recirculating Type
- Single
- Double
Clear
Eccentricity(µm)
0.024

0.03

0.04

0.050
Clear
Length
- Single
- Double
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

Same day
Clear

Specify Alterations

Compact Flanged Linear Bushings With Pilot, Single / Double

Click this image to zoom it.

Move the mouse over or click the image to zoom

Volume Discount

Check FAQ of this product (2 items)

Brand :

MiSUMi Economy

Part Number :

E-LBHP6LUU

E-LBHP8LUU

E-LBHP10LUU

E-LBHP12LUU

E-LBHP16LUU

E-LBHP20LUU

E-LBHP25LUU

E-LBHP30LUU

E-LBHP40LUU

E-LBHPM6LUU

E-LBHPM8LUU

E-LBHPM10LUU

E-LBHPM12LUU

E-LBHPM16LUU

E-LBHPM20LUU

E-LBHPM25LUU

E-LBHPM30LUU

E-LBHPM40LUU

E-LBHP6LUU

Order Qty :
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

Product Description

Compact Flanged Linear Bushings With Pilot, Single / Double
These Linear Bushings are an economy item, The price is cheaper than the MISUMI standard product. They offer a wide variety of sizes to choose from.
[Feature]
● Support Shaft Diameter Minimum/Maximum (mm.): 6 and 40
● Overall Length Minimum/Maximum (mm.): 19 and 151
● Shape : Compact Flanged With Pilot
● Ball Recirculating Type : Single or Double
● Material:
- Housing - SUJ2 Equivalent
- Ball - SUJ2 Equivalent
[Application]
It is used in industrial machinery such as conveyor systems, packaging machines, and robotic equipment.

Economy Compact Flanged Linear Bushings

Durable High-Performance Versatile

- Precision engineering for seamless linear motion.

- High-quality SUJ2 equivalent material ensures durability.

- Wide range of sizes for shaft diameter

- Single and double ball recirculating options available.

- Affordable and high-performance solution for industrial applications.

MISUMI Standard

Cheaper Price

Product Variety

3D CAD
3D CAD Support

Product Overview of Linear Bushings

The flanged Linear Bushings, linear bearing integrates the linear bearing with the support, which is compact in structure and easy to assemble to the mechanism accurately and simply.
The embedded flanged linear bearing does not extend to the opposite side of the mounting surface, so there is sufficient space on the opposite side of the mounting surface.

Product Features of Linear Bushings

Linear Bushings, Linear bearing is a linear type motion guiding mechanism matched with linear guide shaft. The steel ball rolls circularly along the track groove formed by the shell and the retainer, and the linear bearing reciprocates linearly relative to the guide shaft.
Through the rolling of steel ball, high-efficiency movement with low friction resistance can be realized.

Linear Bushings Feature 1: Effective utilization of space. The combination of the guide shaft and the linear bearing enables effective use of space, suitable for small mechanism designs.
Linear Bushings Feature 2: Selection can be made based on operating environment. The outer cylinder of the linear bearing is made of steel or stainless steel, and the retainer is made of stainless steel for harsh conditions or resin for low noise.
Linear Bushings Feature 3: Good interchangeability. Linear bearings have good interchangeability because they can be used with shafts randomly.
Linear Bushings Feature 4: Appropriate specifications can be selected according to the conditions of use.
Linear Bushings Feature 5: More cost effective than the linear guide.

Dimensional Drawing of Linear Bushings

dr16～30:D＋6，dr35:D＋8，dr40:D＋10

Specifications Overview of Linear Bushings

■Material Specification Table of Linear Bushings

Housing			Ball	Retainer	Operating Environment Temperature	Accessories
Material	Hardness	Surface Treatment	Material	Material	Operating Environment Temperature	Accessories
Equivalent to SUJ2	58HRC～	No Surface Treatment Electroless Nickel Plating	Equivalent to SUJ2	Resin	-20 to 80℃	Seal packing Material Nitrile Rubber (-20 to 120℃)

If there are requirements for rust prevention, give priority to products with surface treatment of electroless nickel plating.
Linear Bushings

L, G and H are not engraved on the product.

Usage Method of Linear Bushings

Product Drawings of Linear Bushings	Instructions for use Linear Bushings
	When the linear bearing is under heavy load (unbalanced load), one piece of single liner type is not applicable. It is recommended to use one piece of double liner type or multiple pieces of single liner type.
	Linear Bushings, Linear bearing is not suitable for rotating motion in structure. If you rotate forcibly, it may cause damage to the product. Please pay attention during use.
	Linear bearing is not suitable for repeated plugging and unplugging.
	When inserting the guide shaft into the linear bearing, please align the center and insert it slowly, otherwise the steel ball will fall off or the retainer will be deformed.

Precautions of Linear Bushings

■ Linear Bushings Regular maintenance:
① Before use, please apply grease to the ball row inside the linear bearing, and then replenish it in due course. Grease forms an oil film on the surfaces of steel ball and rolling surface (guide shaft bushing) of linear bearing, which effectively reduces friction and prevents sintering. Grease reduction and aging will greatly affect the life of linear bearing.
② Recommended grease: lithium soap grease.
for details. ③ Recommended grease filling interval: Usually every 6 months.
④When the moving distance is long, it is recommended to move once every three months or when the moving distance exceeds 1000km within the time limit, the 1000km shall prevail.
⑤ When the linear bearing is subjected to large moment load (eccentric load), one piece of single liner type is not applicable, so it is recommended to use one piece of double liner type or multiple pieces of single liner type.

■ Linear Bushings Dust prevention measures:
If dust or foreign matter enters the inside of the linear bearing, it may damage the circulation of steel balls, resulting in unexpected failures. When used in harsh environment, please install dust cover and protection cover, etc.

■ MISUMI linear bearing is recommended to be combined with guide shaft with quenching g6 tolerance.

■ MISUMI linear bearing is recommended to be installed on the holder with H7 tolerance. The linear bearing is in clearance fit with the holder.

Application Industries of Linear Bushings

Electronic & Electrical Appliances	Automotive	Lithium battery

LCD	Smart phone	Semiconductor

Related Products of Linear Bushings

Compact Flanged Linear Bushings, Single / Double / Opposite Couterbored Hole		Round Flanged Linear Bushings, Single / Double / Opposite Couterbored Hole		Square Flanged Linear Bushings, Single / Double / Opposite Couterbored Hole

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 45; 60

Part Number
E-LBHP6LUU
E-LBHP8LUU
E-LBHP10LUU
E-LBHP12LUU
E-LBHP16LUU
E-LBHP20LUU
E-LBHP25LUU
E-LBHP30LUU
E-LBHP40LUU
E-LBHPM6LUU
E-LBHPM8LUU
E-LBHPM10LUU
E-LBHPM12LUU
E-LBHPM16LUU
E-LBHPM20LUU
E-LBHPM25LUU
E-LBHPM30LUU
E-LBHPM40LUU

Price	Minimum Order Qty.	Volume Discount	Days to Ship	RoHS	Inscribed Circle Dia. dr (Ø)	Overall Length L (mm)	Outer Cylinder Surface Treatment	Outer Dia. D (Ø)	Ball Recirculating Type	Length	Eccentricity (µm)	Basic Load Rating: Dynamic Load (Details) (N)	Basic Load Rating: Static Load (N)
₹ 618.00	1 Piece(s)	Available	Same day	10	6	35	No Surface Treatment	12	Double	Double	0.03	324	529
₹ 619.00	1 Piece(s)	Available	Same day	10	8	45	No Surface Treatment	15	Double	Double	0.03	431	784
₹ 642.00	1 Piece(s)	Available	Same day	10	10	55	No Surface Treatment	19	Double	Double	0.03	588	1100
₹ 658.00	1 Piece(s)	Available	Same day	10	12	57	No Surface Treatment	21	Double	Double	0.03	657	1200
₹ 758.00	1 Piece(s)	Available	Same day	10	16	70	No Surface Treatment	28	Double	Double	0.03	1230	2350
₹ 784.00	1 Piece(s)	Available	Same day	10	20	80	No Surface Treatment	32	Double	Double	0.04	1400	2740
₹ 1,088.00	1 Piece(s)	Available	Same day	10	25	112	No Surface Treatment	40	Double	Double	0.04	1560	3140
₹ 1,988.81	1 Piece(s)	Available	Same day	10	30	123	No Surface Treatment	45	Double	Double	0.04	2490	5490
₹ 3,427.37	1 Piece(s)	Available	Same day	10	40	151	No Surface Treatment	60	Double	Double	0.050	3430	8040
₹ 848.17	1 Piece(s)	Available	Same day	10	6	35	[Surface Treatment] Electroless Nickel Plating	12	Double	Double	0.03	324	529
₹ 866.17	1 Piece(s)	Available	Same day	10	8	45	[Surface Treatment] Electroless Nickel Plating	15	Double	Double	0.03	431	784
₹ 926.86	1 Piece(s)	Available	Same day	10	10	55	[Surface Treatment] Electroless Nickel Plating	19	Double	Double	0.03	588	1100
₹ 948.91	1 Piece(s)	Available	Same day	10	12	57	[Surface Treatment] Electroless Nickel Plating	21	Double	Double	0.03	657	1200
₹ 1,119.91	1 Piece(s)	Available	Same day	10	16	70	[Surface Treatment] Electroless Nickel Plating	28	Double	Double	0.03	1230	2350
₹ 1,413.00	1 Piece(s)	Available	Same day	10	20	80	[Surface Treatment] Electroless Nickel Plating	32	Double	Double	0.04	1400	2740
₹ 1,657.00	1 Piece(s)	Available	Same day	10	25	112	[Surface Treatment] Electroless Nickel Plating	40	Double	Double	0.04	1560	3140
₹ 2,110.22	1 Piece(s)	Available	Same day	10	30	123	[Surface Treatment] Electroless Nickel Plating	45	Double	Double	0.04	2490	5490
₹ 3,807.92	1 Piece(s)	Available	Same day	10	40	151	[Surface Treatment] Electroless Nickel Plating	60	Double	Double	0.050	3430	8040

Dimensional Drawing

dr16～30:D＋6，dr35:D＋8，dr40:D＋10

Specification Table

■Material Specification Table

Housing			Ball	Retainer	Operating Environment Temperature	Accessories
Material	Hardness	Surface Treatment	Material	Material	Operating Environment Temperature	Accessories
Equivalent to SUJ2	58HRC～	No Surface Treatment Electroless Nickel Plating	Equivalent to SUJ2	Resin	-20 to 80℃	Seal packing Material Nitrile Rubber (-20 to 120℃)

■Dimension Specification Table

I.D.	dr		O.D. D	Tolerance		L			ℓ	H	T	d	d₁	t	F	A	Lateral misalignment		Number of ball rows	Verticality		Basic Rated Load C (Dynamic) N		Basic Rated Load Co (Static) N		Allowable Static Moment (N・m)	Flanged Weight (g)
I.D.	Single Type Tolerance	Double Type Tolerance	O.D. D	No Surface Treatment	With Surface Treatment	Single Type	Double Type	Tolerance	ℓ	H	T	d	d₁	t	F	A	Single Type	Double Type	Number of ball rows	Single Type	Double Type	Single Type	Double Type	Single Type	Double Type	Allowable Static Moment (N・m)	Single Type	Double Type
6	0 -0.009	0 -0.01	12	0 -0.025	0 -0.020	19	35	±0.3	5	28	5	3.5	6	3.1	−	20	0.024	0.030	4	0.035	0.04	206	324	265	529	2.18	21	28
8			15			24	45		5	32	5	3.5	6	3.1	−	24						265	431	380	784	4.31	33	47
10			19			29	55		6	40	6	4.5	7.5	4.1	−	29						372	588	549	1100	7.24	64	90
12			21			30	57			42					−	32						412	657	598	1200	10.9	68	102
16			28			37	70			48					22	31			5			775	1230	1180	2350	19.7	112	182
20	0 -0.01	0 -0.012	32	0 -0.035	0 -0.030	42	80		8	54	8	5.5	9	5.1	24	36	0.030	0.040	5			882	1400	1370	2740	26.8	167	247
25			40			59	112		8	62	8	5.5	9	5.1	32	40			6			980	1560	1570	3140	43.4	325	525
30			45			64	123		10	74	10	6.6	11	6.1	35	49						1570	2490	2740	5490	82.8	388	645
40	0 -0.012	0 -0.015	60			80	151		13	96	13	9	14	8.1	45	64	0.040	0.050		0.045	0.05	2160	3430	4020	8040	147	913	1423

* mark shows the verticality between Part D and the flange mounting surface.

For information on the flanged height adjusting ring, please refer to the

Adjusting Ring.

Basic Information

Type	Flange	Flange Type	Male-Female Joint Flanged	Style	Standard
Outer Cylinder Material	SUJ2 Equivalent	Lubrication Type	Not Provided	Accuracy	High Grade
Motion	Linear	Types	Pilot Flanged	Flange Shape	Compact Flange
Ball Material	Equivalent to SUJ2	Retainer Material	Resin	Seal	Provided
Greased Filled	Not Provided

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently asked question (FAQ)

Question: How is linear bearing maintained regularly?: Answer: MISUMI recommends that linear bearing is regularly replenished with grease, and it is recommended to do so once every six months. When the moving distance is long, it is recommended to move once every three months or when the moving distance exceeds 1000km within the time limit, the 1000km shall prevail.
Question: Comparison of antirust ability of linear bearings?: Answer: Antirust ability from strong to weak: Low Temp. Black Chrome Plating → No-Electro Nickel Plated → No Surface Treatment.
Standard grade bearing steel is easy to rust, so it is necessary to apply anti-rust oil regularly.

Search by Category / Brand

Search by Category

How can we improve?