What is an oilless bushing and what features does it have?

The bushing body is soaked in lubricating oil. It is a slide bearing which can be “used without oil supply” or “can reduce oil supply times”. Oilless bushings have the following features: 1. Low maintenance frequency; 2. Compared with ball linear bearings, oilless bushings are suitable for low-speed and heavy-load occasions; 3. Allow use under severe conditions of high temperature and low temperature; 4. Compared with linear bearings, oilless bushings are thinner, saving space; 5. Allow use for both linear motion and rotary motion.

What materials are MISUMI oilless bushings made of, and what features do they have respectively?

MISUMI provides oilless bushings made of five materials, including copper alloy, bronze casting, dry type, resin and casting. Copper alloys (metals) have high temperature resistance, excellent chemical resistance and impact resistance, and is suitable for heavy load and low-speed operation. Bronze castings (metals) have excellent sintering resistance, can realize micro-operation, and are suitable for low-load and high-speed operation. Dry (composite layers), resistant to high temperature, suitable for heavy load and low-speed operation, thin wall and compact. Resin (resins), resistant to high temperature and chemicals (polytetrafluoroethylene resin), compliant with food hygiene law and suitable for low load and low-speed operation. Castings (metals) are suitable for medium load and low-speed operation.

Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(1 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

C-MFM10-57

Inner Dia. d Outer Dia. D Overall Length L CAD Days to Ship

Specification/Dimensions

Inner Dia. d(Ø)
10

12

16

20

25

30

40

50
Clear
Outer Dia. D(Ø)
19

21

28

32

40

45

60

80
Clear
Overall Length L(mm)
32

37

42

57

58

67

68

77

80

90

108

128

150

170
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

Same day
Clear

Specify Alterations

Oil Free Bushing Housing Units Round Flanged (C-MFM10-57)

Name: Oil Free Bushing Housing Units Round Flanged
Brand: MISUMI
Price: 2383.7 INR
Availability: InStock

Click this image to zoom it.

Move the mouse over or click the image to zoom

Volume Discount

Check FAQ of this product (2 items)

Brand :

MISUMI

MiSUMi Economy

MISUMI

Order Qty :
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

Product Description

- Oil Free Bushing Housing Units Round Flanged C-MFM series from MISUMI.
- Upgraded Economy Series Oilless Bushing Unit with technical enhancements.
- The case material changed from stainless steel to lightweight aluminum alloy.
- Oilless bushing material upgraded to a durable bronze alloy.
- Integrated one-piece design ensures even distribution of solid lubricant.
- Improved lubrication performance and significantly reduced noise
- Recommended for vertical motion applications.
- Easy installation and lower maintenance frequency
- Upgrade your equipment for smoother operations and enhanced durability.

Economy Oil Free Bushing Round Flanged

Integrated Solid LubricantLightweightImproved Noise

- The oilless bushing integrates solid lubricant throughout the bronze alloy, ensuring even distribution and significantly improved lubrication performance

- The case material is changed from stainless steel to lightweight aluminum alloy, offering the same strength but with reduced weight, enhancing overall performance

- Enhanced design and materials result in significantly reduced noise levels during operation, making it ideal for environments where noise reduction is crucial

- Upgraded from high-strength brass to durable bronze alloy, providing better wear resistance and longer service life

- Advanced lubrication and durable materials ensure a longer service life, reducing the frequency of replacements and maintenance

MISUMI Standard

Cheaper Price

Product Variety

3D CAD
3D CAD Support

Oil Free Bushings Product Overview

Oil Free Bushings The new product of the economy series oilless bushing unit has been technically upgraded, with case material changed from stainless steel to aluminum alloy, and oilless bushing material changed from high-strength brass alloy to bronze alloy;
The oilless bushing is no longer embedded in a hole but integrated as one piece, ensuring more evenly distributed solid lubricant
, improved lubrication performance and significantly reduced noise.
This product is recommended for motions in the vertical direction, allowing easy installation and low maintenance frequency.

Product Drawings

Oil Free Bushings Product Features

Oil Free Bushings The performance of the MISUMI new product has been greatly improved.
1. It is the first time MISUMI has integrated oilless bushing in copper plate, with the assistance of strong glue, allowing the bushing and aluminum alloy case to be tightly press-fitted (patent pending). Compared with the ordinary solid lubricant embedded product, the new solid lubricant is distributed more evenly and the lubricating area is increased by 20%, lubrication effect of oil free bushing greatly improved.
2. Longer service life due to improved lubrication
Conventional type: Final wear amount of 0.030 mm
New product: Final wear amount of 0.020 mm
Experiment conditions: Surface pressure of 25 N/mm², swing speed of 1 m/min, swing frequency of 96,000 times, experiment time of 100 h

Conventional type

New Products

3. Product strength is fully ensured by aluminum alloy case. Test method: Apply load in the vertical direction and obtain the result of bushing stress during the process
Test demonstration: Analysis result of 0.1 mm forced shift of guide shaft in Y direction after the oilless bushing is fixed with screws.

Material	Yield Strength	Stress concentration result
Aluminum Alloy A6061	240Mpa	30.3Mpa
Steel SS400	235Mpa	42.5Mpa

Oil Free Bushings Stress
Product Features

Stress point
Product Features

4. With the assistance of strong glue, the oilless bushing is fixed on the case with press-fit method. Compared with the conventional circlip fixing method, the adhesion is improved by 40% (data collected from the stripping test).

Stripping test
Circlip fixed product	New Products
1.73Mpa	2.45Mpa

Oil Free Bushings Dimensional Drawing

Case material: Aluminum alloy A6061
Surface treatment: Passivation treatment
Liner material: Bronze alloy
* Passivation is a method of treatment to generate a passivation film through direct reaction between aluminum alloy and chemical solution, thereby improving corrosion resistance and bonding force

Part Number			d		D		L		L1	H	T	d1	d2	t	P.C.D	W	F	A
Type				Tolerance		Tolerance	Short	Long
Round Flanged C-MFM	Square Flanged C-MFK	Flanged type C-MFN	10	+0.028 0	19	0 -0.018	32	57	5	40	6	4.5	7.5	4.1	29	30	-	29
			12	+0.034 0	21	0 -0.021	32	57	10	42					32	32	-	32
			16		28		37	67		48					38	37	22	31
			20	+0.041 0	32	0 -0.025	42	77		54	8	5.5	9	5.1	43	42	24	36
			25		40		58	108		62					51	50	32	40
			30		45		68	128		74	10	6.6	11	6.1	60	58	35	49
			40	+0.050 0	60	0 -0.030	80	150	15	96	13	9	14	8.1	78	75	50	60
			50		80		90	170		116					98	92	58	80

Oil Free Bushings Usage Method

Oil Free Bushings It can be used to the guide shaft and lock the flange, in the same way as the linear bearing.

Oil Free Bushings Specifications Overview

Oil Free Bushings Example of Use

Oil Free Bushings Brake device using cylinder rather than lock
Example of Use 1

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 45; 60

Part Number
C-MFM10-57

Part Number	Price	Minimum Order Qty.	Volume Discount	Days to Ship	RoHS	Inner Dia. d (Ø)	Outer Dia. D (Ø)	Overall Length L (mm)
	₹ 2,383.70	1 Piece(s)	Available	Same day	10	10	19	57

Specification Table

Part Number			d		D		L		L1	H	T	d1	d2	t	P.C.D	W	F	A
Type				Tolerance		Tolerance	Short	Long
Round Flanged C-MFM	Square Flanged C-MFK	Flanged type C-MFN	10	+0.028 0	19	0 -0.018	32	57	5	40	6	4.5	7.5	4.1	29	30	-	29
			12	+0.034 0	21	0 -0.021	32	57	10	42					32	32	-	32
			16		28		37	67		48					38	37	22	31
			20	+0.041 0	32	0 -0.025	42	77		54	8	5.5	9	5.1	43	42	24	36
			25		40		58	108		62					51	50	32	40
			30		45		68	128		74	10	6.6	11	6.1	60	58	35	49
			40	+0.050 0	60	0 -0.030	80	150	15	96	13	9	14	8.1	78	75	50	60
			50		80		90	170		116					98	92	58	80

Basic Information

Type	Housing Unit	Metal Type	Special Bronze Cast	Environment	Standard / In Oil
Housing Unit Type	Round Flange	Mounting Shaft Fits	g6 / f8	Lubrication	Unlubricated / Regular Lubrication
Max. Allowable Surface Pressure P(N/mm²)	29	Case Material	Aluminum Alloy	Maximum Allowable Velocity(m/s)	0.5
Max. Allowable PV Value Range(N/mm²•m/s)	1.1~2.0	Max. Allowable PV Value(N/mm²•m/s)	1.65	Operating Temperature Range(°C)	-40::200
Seal Type	No Seal

Please check the type/dimensions/specifications of the part C-MFM10-57 in the Oil Free Bushing Housing Units Round Flanged series.

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently asked question (FAQ)

Question: What is an oilless bushing and what features does it have?: Answer: The bushing body is soaked in lubricating oil. It is a slide bearing which can be “used without oil supply” or “can reduce oil supply times”.
Oilless bushings have the following features:
1. Low maintenance frequency;
2. Compared with ball linear bearings, oilless bushings are suitable for low-speed and heavy-load occasions;
3. Allow use under severe conditions of high temperature and low temperature;
4. Compared with linear bearings, oilless bushings are thinner, saving space;
5. Allow use for both linear motion and rotary motion.
Question: What materials are MISUMI oilless bushings made of, and what features do they have respectively?: Answer: MISUMI provides oilless bushings made of five materials, including copper alloy, bronze casting, dry type, resin and casting.
Copper alloys (metals) have high temperature resistance, excellent chemical resistance and impact resistance, and is suitable for heavy load and low-speed operation.
Bronze castings (metals) have excellent sintering resistance, can realize micro-operation, and are suitable for low-load and high-speed operation.
Dry (composite layers), resistant to high temperature, suitable for heavy load and low-speed operation, thin wall and compact.
Resin (resins), resistant to high temperature and chemicals (polytetrafluoroethylene resin), compliant with food hygiene law and suitable for low load and low-speed operation.
Castings (metals) are suitable for medium load and low-speed operation.

Product variants

Part Number
C-MFM10-32
C-MFM12-32
C-MFM12-57
C-MFM16-37
C-MFM16-67
C-MFM20-42

Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	RoHS	Inner Dia. d (Ø)	Outer Dia. D (Ø)	Overall Length L (mm)
₹ 1,225.40	1 Piece(s)	Available	Same day Stock	10	10	19	32
₹ 1,280.40	1 Piece(s)	Available	Same day Stock	10	12	21	32
₹ 2,528.90	1 Piece(s)	Available	Same day Stock	10	12	21	57
₹ 1,419.00	1 Piece(s)	Available	Same day Stock	10	16	28	37
₹ 2,983.20	1 Piece(s)	Available	Same day Stock	10	16	28	67
₹ 1,459.70	1 Piece(s)	Available	Same day Stock	10	20	32	42

Search by Category / Brand

Search by Category

How can we improve?